2967 lines
122 KiB
C++
2967 lines
122 KiB
C++
#include "Watchy_GSR.h"
|
|
|
|
// Debug message code.
|
|
bool SerialSetup;
|
|
|
|
//Timezone configuration
|
|
static const char TZURL[] PROGMEM = "http://ip-api.com/json";
|
|
static const char UserAgent[] PROGMEM = "Watchy";
|
|
char WiFiIDs[] PROGMEM = "ABCDEFGHIJ";
|
|
|
|
// AlarmVBs[] = {"0111111110", "0011001100", "0110110110", "0101001010"};
|
|
int AlarmVBs[] = {0x01FE, 0x00CC, 0x01B6, 0x014A};
|
|
const uint16_t Bits[10] = {1,2,4,8,16,32,64,128,256,512};
|
|
const float Reduce[5] = {1.0,0.8,0.6,0.4,0.2};
|
|
|
|
RTC_DATA_ATTR struct GSRWireless {
|
|
bool Requested; // Request WiFi.
|
|
bool Working; // Working on getting WiFi.
|
|
bool Results; // Results of WiFi, found an AP?
|
|
uint8_t Index; // 10 = built-in, roll backwards to 0.
|
|
uint8_t Requests; // WiFi Connect requests.
|
|
struct APInfo {
|
|
char APID[33];
|
|
char PASS[64];
|
|
} AP[10]; // Using APID to avoid internal confusion with SSID.
|
|
unsigned long Last; // Used with millis() to maintain sanity.
|
|
bool Tried; // Tried to connect at least once.
|
|
} GSRWiFi;
|
|
|
|
RTC_DATA_ATTR struct CPUWork {
|
|
uint32_t Freq;
|
|
bool Locked;
|
|
} CPUSet;
|
|
|
|
RTC_DATA_ATTR struct Stepping {
|
|
uint8_t Hour;
|
|
uint8_t Minutes;
|
|
bool Reset;
|
|
uint32_t Yesterday;
|
|
} Steps;
|
|
|
|
RTC_DATA_ATTR struct Optional {
|
|
bool TwentyFour; // If the face shows 24 hour or Am/Pm.
|
|
bool LightMode; // Light/Dark mode.
|
|
bool Feedback; // Haptic Feedback on buttons.
|
|
bool Border; // True to set the border to black/white.
|
|
bool Lefty; // Swaps the buttons to the other side.
|
|
bool Swapped; // Menu and Back buttons swap ends (vertically).
|
|
bool Orientated; // Set to false to not bother which way the buttons are.
|
|
uint8_t Turbo; // 0-10 seconds.
|
|
uint8_t MasterRepeats; // Done for ease, will be in the Alarms menu.
|
|
int Drift; // Seconds drift in RTC.
|
|
bool UsingDrift; // Use the above number to add to the RTC by dividing it by 1000.
|
|
uint8_t SleepStyle; // 0==Disabled, 1==Always, 2==Sleeping
|
|
uint8_t SleepMode; // Turns screen off (black, won't show any screen unless a button is pressed)
|
|
uint8_t SleepStart; // Hour when you go to bed.
|
|
uint8_t SleepEnd; // Hour when you wake up.
|
|
uint8_t Performance; // Performance style, "Turbo", "Normal", "Battery Saving"
|
|
bool NeedsSaving; // NVS code to tell it things have been updated, so save to NVS.
|
|
} Options;
|
|
|
|
RTC_DATA_ATTR int GuiMode;
|
|
RTC_DATA_ATTR bool ScreenOn; // Screen needs to be on.
|
|
RTC_DATA_ATTR bool VibeMode; // Vibe Motor is On=True/Off=False, used for the Haptic and Alarms.
|
|
RTC_DATA_ATTR String WatchyStatus; // Used for the indicator in the bottom left, so when it changes, it asks for a screen refresh, if not, it doesn't.
|
|
|
|
RTC_DATA_ATTR struct TimeData {
|
|
time_t UTC_RAW; // Copy of the UTC on init.
|
|
tmElements_t UTC; // Copy of UTC only split up for usage.
|
|
tmElements_t Local; // Copy of the Local time on init.
|
|
String TimeZone; // The location timezone, not the actual POSIX.
|
|
char POSIX[64]; // The POSIX result.
|
|
unsigned long EPSMS; // Milliseconds (rounded to the enxt minute) when the clock was updated via NTP.
|
|
bool NewMinute; // Set to True when New Minute happens.
|
|
time_t TravelTest; // For Travel Testing.
|
|
int32_t Drifting; // The amount to add to UTC_RAW after reading from the RTC.
|
|
int64_t WatchyRTC; // Counts Microseconds from boot.
|
|
bool DeadRTC; // Set when Drift fails to get a good count less than 30 seconds.
|
|
} WatchTime;
|
|
|
|
RTC_DATA_ATTR struct Countdown {
|
|
bool Active;
|
|
uint8_t Hours;
|
|
uint8_t Mins;
|
|
uint8_t MaxHours;
|
|
uint8_t MaxMins;
|
|
uint8_t Tone; // 10 to start.
|
|
uint8_t ToneLeft; // 30 to start.
|
|
uint8_t MaxTones; // 0-4 (20-80%) tone duration reduction.
|
|
time_t LastUTC;
|
|
} TimerDown;
|
|
|
|
RTC_DATA_ATTR struct CountUp {
|
|
bool Active;
|
|
time_t SetAt;
|
|
time_t StopAt;
|
|
} TimerUp;
|
|
|
|
RTC_DATA_ATTR struct BatteryUse {
|
|
float Last; // Used to track battery changes, only updates past 0.01 in change.
|
|
int8_t Direction; // -1 for draining, 1 for charging.
|
|
int8_t DarkDirection; // Direction copy for Options.SleepMode.
|
|
int8_t UpCount; // Counts how many times the battery is in a direction to determine true charging.
|
|
int8_t DownCount;
|
|
int8_t LastState; // 0=not visible, 1= showing chargeme, 2=showing charging.
|
|
} Battery;
|
|
|
|
RTC_DATA_ATTR struct MenuUse {
|
|
int8_t Style; // MENU_INNORMAL or MENU_INOPTIONS
|
|
int8_t Item; // What Menu Item is being viewed.
|
|
int8_t SubItem; // Used for menus that have sub items, like alarms and Sync Time.
|
|
int8_t SubSubItem; // Used mostly in the alarm to offset choice.
|
|
} Menu;
|
|
|
|
RTC_DATA_ATTR struct NTPUse {
|
|
uint8_t State; // State = 0=Off, 1=Start WiFi, 2=Wait for WiFi, TZ, send NTP request, etc, Finish. See function ProcessNTP();
|
|
uint8_t Wait; // Counts up to 3 minutes, then fails.
|
|
uint8_t Pause; // How many 50ms to pause for.
|
|
time_t Last; // Last time it worked.
|
|
bool TimeZone; // Update Timezone during ProcessNTP.
|
|
bool UpdateUTC; // Update UTC during ProcessNTP.
|
|
bool TimeTest; // Test the RTC against ESP32's MS count for 1 minute.
|
|
uint8_t TestCount; // Counts the duration of minutes, does 2.
|
|
bool NTPDone; // Sets it to Done when an NTP has happened in the past.
|
|
} NTPData;
|
|
|
|
RTC_DATA_ATTR struct GoneDark {
|
|
bool Went;
|
|
unsigned long Last;
|
|
} Darkness; // Whether or not the screen is darkened.
|
|
|
|
RTC_DATA_ATTR struct dispUpdate {
|
|
bool Full;
|
|
bool Drawn;
|
|
} Updates;
|
|
|
|
#ifndef WATCHY_H
|
|
RTC_DATA_ATTR BMA423 sensor;
|
|
#endif
|
|
|
|
#ifndef PCF8563RTC
|
|
DS3232RTC WatchyGSR::RTC(false);
|
|
#else
|
|
PCF8563 WatchyGSR::RTC(false);
|
|
#endif
|
|
|
|
GxEPD2_BW<GxEPD2_154_D67, GxEPD2_154_D67::HEIGHT> WatchyGSR::display(GxEPD2_154_D67(CS, DC, RESET, BUSY));
|
|
|
|
volatile uint8_t Button;
|
|
|
|
//RTC_DATA_ATTR alignas(8) struct AlarmID {
|
|
RTC_DATA_ATTR uint8_t Alarms_Hour[4];
|
|
RTC_DATA_ATTR uint8_t Alarms_Minutes[4];
|
|
RTC_DATA_ATTR uint16_t Alarms_Active[4]; // Bits 0-6 (days of week), 7 Repeat, 8 Active, 9 Tripped (meaning if it isn't repeating, don't fire).
|
|
RTC_DATA_ATTR uint8_t Alarms_Times[4]; // Set to 10 to start, ends when zero.
|
|
RTC_DATA_ATTR uint8_t Alarms_Playing[4]; // Means the alarm tripped and it is to be played (goes to 0 when it finishes).
|
|
RTC_DATA_ATTR uint8_t Alarms_Repeats[4]; // 0-4 (20-80%) reduction in repetitions.
|
|
//} Alarms[4];
|
|
|
|
WiFiClient WiFiC; // Tz
|
|
WiFiManager wifiManager;
|
|
HTTPClient HTTP; // Tz
|
|
Olsen2POSIX OP; // Tz code.
|
|
WebServer server(80);
|
|
unsigned long OTATimer;
|
|
bool WatchyAPOn; // States Watchy's AP is on for connection. Puts in Active Mode until back happens.
|
|
bool ActiveMode; // Moved so it can be checked.
|
|
bool Sensitive; // Loop code is sensitive, like OTAUpdate, TimeTest
|
|
bool OTAUpdate; // Internet based OTA Update.
|
|
bool AlarmReset; // Moved out here to work with Active Mode.
|
|
bool OTAEnd; // Means somewhere, it wants this to end, so end it.
|
|
int OTATry; // Tries to connect to WiFi.
|
|
bool DoHaptic; // Want it to happen after screen update.
|
|
bool UpdateDisp; // Display needs to be updated.
|
|
bool IDidIt; // Tells if the Drifting was done this minute.
|
|
bool AlarmsOn; // Moved for CPU.
|
|
time_t TurboTime; // Moved here for less work.
|
|
unsigned long LastButton, OTAFail;
|
|
|
|
WatchyGSR::WatchyGSR(){} //constructor
|
|
|
|
// Init Defaults after a reboot, setup all the variables here for defaults to avoid randomness.
|
|
void WatchyGSR::setupDefaults(){
|
|
Options.TwentyFour = false;
|
|
Options.LightMode = true;
|
|
Options.Feedback = true;
|
|
Options.Border = false;
|
|
Options.Lefty = false;
|
|
Options.Swapped = false;
|
|
Options.Turbo = 3;
|
|
Options.SleepStyle = 0;
|
|
Options.SleepMode = 3;
|
|
Options.SleepStart = 23;
|
|
Options.SleepEnd = 7;
|
|
Options.MasterRepeats = 0; // 100%.
|
|
Steps.Hour = 6;
|
|
Steps.Minutes = 0;
|
|
}
|
|
|
|
void WatchyGSR::init(){
|
|
uint64_t wakeupBit;
|
|
int AlarmIndex, Pushed; // Alarm being played.
|
|
bool WaitForNext, Pulse, DoOnce, B;
|
|
unsigned long Since, APLoop;
|
|
String S;
|
|
|
|
esp_sleep_wakeup_cause_t wakeup_reason;
|
|
Wire.begin(SDA, SCL); //init i2c
|
|
NVS.begin();
|
|
|
|
pinMode(MENU_BTN_PIN, INPUT); // Prep these for the loop below.
|
|
pinMode(BACK_BTN_PIN, INPUT);
|
|
pinMode(UP_BTN_PIN, INPUT);
|
|
pinMode(DOWN_BTN_PIN, INPUT);
|
|
|
|
wakeup_reason = esp_sleep_get_wakeup_cause(); //get wake up reason
|
|
wakeupBit = esp_sleep_get_ext1_wakeup_status();
|
|
DoOnce = true;
|
|
IDidIt = false;
|
|
Updates.Drawn = false;
|
|
LastButton = 0;
|
|
Darkness.Last = 0;
|
|
TurboTime = 0;
|
|
CPUSet.Freq=getCpuFrequencyMhz();
|
|
|
|
switch (wakeup_reason)
|
|
{
|
|
case ESP_SLEEP_WAKEUP_EXT0: //RTC Alarm
|
|
WatchTime.Drifting += Options.Drift;
|
|
IDidIt = true;
|
|
UpdateUTC();
|
|
RTC.alarm(ALARM_2); //resets the alarm flag in the RTC
|
|
WatchTime.EPSMS = (millis() + (1000 * (60 - WatchTime.UTC.Second)));
|
|
WatchTime.NewMinute = true;
|
|
RefreshCPU(CPUMAX);
|
|
UpdateClock();
|
|
detectBattery();
|
|
UpdateDisp=Showing();
|
|
break;
|
|
case ESP_SLEEP_WAKEUP_EXT1: //button Press
|
|
RefreshCPU(CPUMAX);
|
|
UpdateUTC();
|
|
WatchTime.EPSMS = (millis() + (1000 * (60 - WatchTime.UTC.Second)));
|
|
UpdateDisp = !Showing();
|
|
Button = getButtonMaskToID(wakeupBit);
|
|
break;
|
|
default: //reset
|
|
initZeros();
|
|
setupDefaults();
|
|
_rtcConfig();
|
|
_bmaConfig();
|
|
UpdateUTC();
|
|
B = NVS.getString("GSR-TZ",S);
|
|
if (S.length() > 0) strcpy(WatchTime.POSIX,S.c_str());
|
|
RetrieveSettings();
|
|
RefreshCPU(CPUMAX);
|
|
WatchTime.WatchyRTC = esp_timer_get_time() + ((60 - WatchTime.UTC.Second) * 1000000);
|
|
WatchTime.EPSMS = (millis() + (1000 * (60 - WatchTime.UTC.Second)));
|
|
UpdateUTC();
|
|
UpdateClock();
|
|
AlarmIndex=0;
|
|
AlarmsOn=false;
|
|
WaitForNext=false;
|
|
Updates.Full=true;
|
|
UpdateDisp=true;
|
|
//Init interrupts.
|
|
attachInterrupt(digitalPinToInterrupt(MENU_BTN_PIN), std::bind(&WatchyGSR::handleInterrupt,this), HIGH);
|
|
attachInterrupt(digitalPinToInterrupt(BACK_BTN_PIN), std::bind(&WatchyGSR::handleInterrupt,this), HIGH);
|
|
attachInterrupt(digitalPinToInterrupt(UP_BTN_PIN), std::bind(&WatchyGSR::handleInterrupt,this), HIGH);
|
|
attachInterrupt(digitalPinToInterrupt(DOWN_BTN_PIN), std::bind(&WatchyGSR::handleInterrupt,this), HIGH);
|
|
break;
|
|
}
|
|
|
|
display.init(0,false); // Force it here so it fixes the border.
|
|
display.epd2.setDarkBorder(Options.Border);
|
|
|
|
// Sometimes BMA crashes - simply try to reinitialize bma...
|
|
|
|
if (sensor.getErrorCode() != 0) {
|
|
sensor.shutDown();
|
|
sensor.wakeUp();
|
|
sensor.softReset();
|
|
_bmaConfig();
|
|
}
|
|
|
|
if (Button > 0) { handleButtonPress(Button); Button = 0; }
|
|
|
|
CalculateTones(); monitorSteps();
|
|
AlarmsOn =(Alarms_Times[0] > 0 || Alarms_Times[1] > 0 || Alarms_Times[2] > 0 || Alarms_Times[3] > 0 || TimerDown.ToneLeft > 0);
|
|
ActiveMode = (InTurbo() || DarkWait() || NTPData.State > 0 || AlarmsOn || WatchyAPOn || OTAUpdate || NTPData.TimeTest || WatchTime.DeadRTC);
|
|
Sensitive = ((OTAUpdate && Menu.SubItem == 3) || (NTPData.TimeTest && Menu.SubItem == 2));
|
|
|
|
RefreshCPU();
|
|
|
|
while(DoOnce || Button > 0){
|
|
DoOnce = false; // Do this whole thing once, catch late button presses at the END of the loop just before Deep Sleep.
|
|
ManageTime(); // Handle Time method.
|
|
AlarmReset = millis();
|
|
if (UpdateDisp) showWatchFace(); //partial updates on tick
|
|
if (ActiveMode == true){
|
|
while (ActiveMode == true) { // Here, we hijack the init and LOOP until the NTP is done, watching for the proper time when we *SHOULD* update the screen to keep time with everything.
|
|
Since=millis();
|
|
ManageTime(); // Handle Time method.
|
|
processWiFiRequest(); // Process any WiFi requests.
|
|
if (!Sensitive){
|
|
if (NTPData.State > 0 && !WatchyAPOn && !OTAUpdate){
|
|
if (NTPData.Pause == 0) ProcessNTP(); else NTPData.Pause--;
|
|
if (WatchTime.NewMinute){
|
|
NTPData.Wait++;
|
|
UpdateDisp=Showing();
|
|
}
|
|
}
|
|
|
|
// Here, make sure the clock updates on-screen.
|
|
if (WatchTime.NewMinute){
|
|
detectBattery();
|
|
UpdateDisp = Showing();
|
|
}
|
|
|
|
// Here, do the alarm buzzings by way of which one is running.
|
|
|
|
if (AlarmsOn && !OTAUpdate){
|
|
if (WaitForNext){
|
|
// Wait for the next second to change between any alarms still to play.
|
|
if (millis() - AlarmReset > 999){ // Time changed.
|
|
AlarmReset = millis();
|
|
WaitForNext = false;
|
|
AlarmIndex = roller(AlarmIndex + 1, 0, 4);
|
|
if (getToneTimes(AlarmIndex) == 0){
|
|
AlarmIndex = roller(AlarmIndex + 1, 0, 4);
|
|
if (getToneTimes(AlarmIndex) == 0){
|
|
AlarmIndex = roller(AlarmIndex + 1, 0, 4);
|
|
if (getToneTimes(AlarmIndex) == 0){
|
|
AlarmIndex = roller(AlarmIndex + 1, 0, 4);
|
|
if (getToneTimes(AlarmIndex) == 0){
|
|
AlarmIndex = roller(AlarmIndex + 1, 0, 4);
|
|
}
|
|
}
|
|
}
|
|
}
|
|
}
|
|
}else if(AlarmIndex == 4){
|
|
if (TimerDown.ToneLeft > 0){
|
|
if (TimerDown.Tone == 0){
|
|
WaitForNext=true;
|
|
if (TimerDown.ToneLeft > 0){
|
|
TimerDown.ToneLeft--;
|
|
TimerDown.Tone = 24;
|
|
}
|
|
}else{
|
|
TimerDown.Tone--;
|
|
Pulse = (((TimerDown.Tone / 2) & 1) != 0);
|
|
if (!Pulse && TimerDown.Tone > 0) TimerDown.Tone--;
|
|
VibeTo(Pulse); // Turns Vibe on or off depending on bit state.
|
|
Darkness.Last=millis();
|
|
}
|
|
}else WaitForNext=true;
|
|
}else if (Alarms_Times[AlarmIndex] > 0){
|
|
if (Alarms_Playing[AlarmIndex] > 0){
|
|
Alarms_Playing[AlarmIndex]--;
|
|
if (Menu.SubItem > 0 && Menu.Item - MENU_ALARM1 == AlarmIndex){
|
|
VibeTo(false);
|
|
Darkness.Last=millis();
|
|
DoHaptic = false;
|
|
Alarms_Playing[AlarmIndex]=0;
|
|
Alarms_Times[AlarmIndex]=0;
|
|
}else{
|
|
Pulse = ((AlarmVBs[AlarmIndex] & Bits[Alarms_Playing[AlarmIndex] / 3]) != 0);
|
|
VibeTo(Pulse); // Turns Vibe on or off depending on bit state.
|
|
Darkness.Last=millis();
|
|
DoHaptic = false;
|
|
}
|
|
if (Alarms_Playing[AlarmIndex] == 0 && Alarms_Times[AlarmIndex] > 0){
|
|
Alarms_Times[AlarmIndex]--; // Decrease count, eventually this will all stop on it's own.
|
|
WaitForNext = true;
|
|
if (Alarms_Times[AlarmIndex] > 0) Alarms_Playing[AlarmIndex] = 30;
|
|
}
|
|
}else WaitForNext = true;
|
|
}else WaitForNext = true;
|
|
}
|
|
|
|
if (GSRWiFi.Requests == 0 && WatchyAPOn && !OTAUpdate){
|
|
switch (Menu.SubItem){
|
|
case 0: // Turn off AP.
|
|
OTAEnd = true;
|
|
break;
|
|
case 1: // Turn on AP.
|
|
if (WiFi.getMode() != WIFI_AP || (millis() - OTATimer > 4000 && OTATry < 3)){
|
|
OTATimer=millis();
|
|
OTATry++;
|
|
WiFi.setHostname(WiFi_AP_SSID);
|
|
wifiManager.setConfigPortalBlocking(false);
|
|
wifiManager.setWiFiAPHidden(WiFi_AP_HIDE);
|
|
OTAEnd |= (!WiFi.softAP(WiFi_AP_SSID, WiFi_AP_PSWD, 1, WiFi_AP_HIDE, WiFi_AP_MAXC));
|
|
}else if (WiFi.getMode() == WIFI_AP){
|
|
wifiManager.startWebPortal();
|
|
Menu.SubItem++;
|
|
setStatus("WiFi-AP");
|
|
UpdateDisp=Showing();
|
|
APLoop=millis();
|
|
}else Menu.SubItem = 0; // Fail, something is amiss.
|
|
break;
|
|
default: // 2 to 5 is here.
|
|
if (Menu.SubItem > 1){
|
|
if(WiFi.getMode() == WIFI_STA){
|
|
Menu.SubItem = 0;
|
|
break;
|
|
}
|
|
if (wifiManager.process()){ // Setting worked.
|
|
Menu.SubItem = 0;
|
|
break;
|
|
}
|
|
if (millis() - APLoop > 8000){
|
|
Menu.SubItem = roller(Menu.SubItem + 1, 2,4);
|
|
UpdateDisp = Showing();
|
|
APLoop=millis();
|
|
}
|
|
}
|
|
}
|
|
}
|
|
}
|
|
if (OTAUpdate){
|
|
switch (Menu.SubItem){
|
|
case 1: // Wait for WiFi to connect or fail.
|
|
if (WiFi.status() != WL_CONNECTED && currentWiFi() != WL_CONNECT_FAILED) OTATimer = millis();
|
|
else if (WiFi.status() == WL_CONNECTED){
|
|
Menu.SubItem++;
|
|
UpdateDisp = Showing();
|
|
}else OTAEnd=true;
|
|
break;
|
|
case 2: // Setup Arduino OTA and wait for it to either finish or fail by way of back button held for too long OR 2 minute with no upload.
|
|
if (Menu.Item == MENU_OTAU){
|
|
ArduinoOTA.setHostname(WiFi_AP_SSID);
|
|
ArduinoOTA
|
|
.onStart([]() {
|
|
String Type;
|
|
if (ArduinoOTA.getCommand() == U_FLASH)
|
|
Type = "sketch";
|
|
else // U_SPIFFS
|
|
Type = "filesystem";
|
|
// NOTE: if updating SPIFFS this would be the place to unmount SPIFFS using SPIFFS.end()
|
|
//Serial.println("Start updating " + Type);
|
|
})
|
|
.onEnd([]() {
|
|
OTAEnd = true;
|
|
//Serial.println("\nEnd");
|
|
})
|
|
.onProgress([](unsigned int progress, unsigned int total) {
|
|
OTATimer=millis();
|
|
//Serial.printf("Progress: %u%%\n", (progress / (total / 100)));
|
|
})
|
|
.onError([](ota_error_t error) {
|
|
/*Serial.printf("Error[%u]: ", error);
|
|
if (error == OTA_AUTH_ERROR) Serial.println("Auth Failed");
|
|
else if (error == OTA_BEGIN_ERROR) Serial.println("Begin Failed");
|
|
else if (error == OTA_CONNECT_ERROR) Serial.println("Connect Failed");
|
|
else if (error == OTA_RECEIVE_ERROR) Serial.println("Receive Failed");
|
|
else if (error == OTA_END_ERROR) Serial.println("End Failed");
|
|
*/
|
|
});
|
|
ArduinoOTA.begin();
|
|
RefreshCPU(CPUMAX);
|
|
}else if (Menu.Item == MENU_OTAM){
|
|
/*return index page which is stored in basicIndex */
|
|
server.on("/", HTTP_GET, [=]() {
|
|
server.sendHeader("Connection", "close");
|
|
server.send(200, "text/html", basicIndex);
|
|
OTATimer=millis();
|
|
});
|
|
server.on("/settings", HTTP_GET, [=]() {
|
|
String S = settingsA + GetSettings() + settingsB;
|
|
server.sendHeader("Connection", "close");
|
|
server.send(200, "text/html", S);
|
|
OTATimer=millis();
|
|
});
|
|
server.on("/wifi", HTTP_GET, [=]() {
|
|
server.sendHeader("Connection", "close");
|
|
server.send(200, "text/html", buildWiFiAPPage());
|
|
OTATimer=millis();
|
|
});
|
|
server.on("/update", HTTP_GET, [=]() {
|
|
server.sendHeader("Connection", "close");
|
|
server.send(200, "text/html", updateIndex);
|
|
OTATimer=millis();
|
|
});
|
|
server.on("/settings", HTTP_POST, [=](){
|
|
if (server.argName(0) == "settings") { StoreSettings(server.arg(0)); RecordSettings(); }
|
|
server.sendHeader("Connection", "close");
|
|
server.send(200, "text/html", settingsDone);
|
|
OTATimer=millis();
|
|
});
|
|
server.on("/wifi", HTTP_POST, [=](){
|
|
uint8_t I = 0;
|
|
while (I < server.args()){
|
|
parseWiFiPageArg(server.argName(I),server.arg(I)); I++;
|
|
}
|
|
server.sendHeader("Connection", "close");
|
|
server.send(200, "text/html", wifiDone);
|
|
RecordSettings();
|
|
OTAFail = millis() - 598000;
|
|
});
|
|
server.on("/update", HTTP_POST, [](){
|
|
server.sendHeader("Connection", "close");
|
|
server.send(200, "text/plain", (Update.hasError()) ? "Upload Failed." : "Watchy will reboot!");
|
|
delay(2000);
|
|
ESP.restart();
|
|
}, []() {
|
|
HTTPUpload& upload = server.upload();
|
|
if (upload.status == UPLOAD_FILE_START) {
|
|
OTATimer=millis();
|
|
//Serial.printf("Update: %s\n", upload.filename.c_str());
|
|
if (!Update.begin(UPDATE_SIZE_UNKNOWN)) { //start with max available size
|
|
Update.printError(Serial);
|
|
}
|
|
} else if (upload.status == UPLOAD_FILE_WRITE) {
|
|
/* flashing firmware to ESP*/
|
|
delay(2);
|
|
if (Update.write(upload.buf, upload.currentSize) != upload.currentSize) Update.printError(Serial);
|
|
delay(2);
|
|
} else if (upload.status == UPLOAD_FILE_END) {
|
|
if (Update.end(true)) { //true to set the size to the current progress
|
|
OTAEnd=true;
|
|
//Serial.printf("Update Success: %u\nRebooting...\n", upload.totalSize);
|
|
} //else Update.printError(Serial);
|
|
}
|
|
});
|
|
RefreshCPU(CPUMAX);
|
|
server.begin();
|
|
}
|
|
Menu.SubItem++;
|
|
showWatchFace();
|
|
break;
|
|
case 3: // Monitor back button and turn WiFi off if it happens, or if duration is longer than 2 minutes.
|
|
if (Menu.Item == MENU_OTAU) ArduinoOTA.handle();
|
|
else if (Menu.Item == MENU_OTAM) server.handleClient();
|
|
if (getButtonPins() != 2) OTATimer = millis(); // Not pressing "BACK".
|
|
if (millis() - OTATimer > 10000 || millis() - OTAFail > 600000) OTAEnd = true; // Fail if holding back for 10 seconds OR 600 seconds has passed.
|
|
}
|
|
}
|
|
|
|
// OTAEnd code.
|
|
if (OTAEnd){
|
|
//if (Menu.Item == MENU_OTAU) ArduinoOTA.stop(); // Why is there no stop/close???
|
|
if (Menu.Item == MENU_OTAM) server.stop();
|
|
if (WatchyAPOn) wifiManager.stopConfigPortal();
|
|
VibeTo(false);
|
|
OTAEnd=false;
|
|
OTAUpdate=false;
|
|
WatchyAPOn = false;
|
|
endWiFi();
|
|
if (Menu.Item != MENU_TOFF){
|
|
Menu.SubItem=0;
|
|
UpdateUTC();
|
|
UpdateClock();
|
|
}
|
|
Battery.UpCount=0; // Stop it from thinking the battery went wild.
|
|
UpdateDisp=Showing();
|
|
}
|
|
|
|
// Don't do anything time sensitive while in OTA Update.
|
|
if (!Sensitive){
|
|
// Here, check for button presses and respond, done here to avoid turbo button presses.
|
|
|
|
if (!DarkWait()) GoDark();
|
|
handleInterrupt();
|
|
if (Button > 0) { handleButtonPress(Button); Button = 0; }
|
|
if (UpdateDisp) showWatchFace(); //partial updates on tick
|
|
|
|
CalculateTones(); monitorSteps();
|
|
AlarmsOn =(Alarms_Times[0] > 0 || Alarms_Times[1] > 0 || Alarms_Times[2] > 0 || Alarms_Times[3] > 0 || TimerDown.ToneLeft > 0);
|
|
ActiveMode = (InTurbo() || DarkWait() || NTPData.State > 0 || AlarmsOn || WatchyAPOn || OTAUpdate || NTPData.TimeTest || WatchTime.DeadRTC);
|
|
|
|
if (WatchTime.DeadRTC && Options.NeedsSaving) RecordSettings();
|
|
RefreshCPU(CPUDEF);
|
|
Since=50-(millis()-Since);
|
|
if (Since <= 50) delay(Since);
|
|
}
|
|
WatchTime.NewMinute=false;
|
|
IDidIt=false;
|
|
Sensitive = ((OTAUpdate && Menu.SubItem == 3) || (NTPData.TimeTest && Menu.SubItem == 2));
|
|
}
|
|
}
|
|
|
|
if (Button > 0) { handleButtonPress(Button); Button = 0; }
|
|
processWiFiRequest(); // Process any WiFi requests.
|
|
if (UpdateDisp) showWatchFace(); //partial updates on tick
|
|
AlarmsOn =(Alarms_Times[0] > 0 || Alarms_Times[1] > 0 || Alarms_Times[2] > 0 || Alarms_Times[3] > 0 || TimerDown.ToneLeft > 0);
|
|
ActiveMode = (InTurbo() || DarkWait() || NTPData.State > 0 || AlarmsOn || WatchyAPOn || OTAUpdate || NTPData.TimeTest || WatchTime.DeadRTC);
|
|
if (ActiveMode) DoOnce = true;
|
|
}
|
|
deepSleep();
|
|
}
|
|
|
|
void WatchyGSR::showWatchFace(){
|
|
if (Options.Performance > 0) RefreshCPU((Options.Performance == 1 ? CPUMID : CPUMAX));
|
|
display.epd2.setDarkBorder(Options.Border);
|
|
display.setFullWindow();
|
|
drawWatchFace();
|
|
|
|
if (Options.Feedback && DoHaptic){
|
|
VibeTo(true);
|
|
delay(40);
|
|
VibeTo(false);
|
|
}
|
|
DoHaptic=false;
|
|
UpdateDisp=false;
|
|
Darkness.Went=false;
|
|
Darkness.Last = millis();
|
|
display.display(!Updates.Full); //partial refresh
|
|
Updates.Full=false;
|
|
Updates.Drawn=true;
|
|
RefreshCPU();
|
|
}
|
|
|
|
void WatchyGSR::drawWatchFace(){
|
|
uint8_t Direction;
|
|
|
|
Direction = sensor.getDirection(); // Directional screen on. == DIRECTION_DISP_UP
|
|
|
|
display.fillScreen(Options.LightMode ? GxEPD_WHITE : GxEPD_BLACK);
|
|
display.setTextColor(Options.LightMode ? GxEPD_BLACK : GxEPD_WHITE);
|
|
|
|
ScreenOn = (Direction == DIRECTION_DISP_UP || Direction == DIRECTION_TOP_EDGE || Battery.Direction == 1 || true); // True set due to bug.
|
|
|
|
if (ScreenOn){
|
|
if (!(OTAUpdate || WatchyAPOn || (Menu.Item == MENU_TOFF && Menu.SubItem == 2))){
|
|
drawTime();
|
|
drawDay();
|
|
drawYear();
|
|
}
|
|
if (GuiMode == WATCHON) drawDate();
|
|
else if (GuiMode == MENUON) drawMenu();
|
|
}
|
|
drawChargeMe();
|
|
// Show WiFi/AP/TZ/NTP if in progress.
|
|
drawStatus();
|
|
UpdateDisp = false;
|
|
}
|
|
|
|
void WatchyGSR::drawTime(){
|
|
int16_t x1, y1;
|
|
uint16_t w, h, tw;
|
|
String O;
|
|
bool PM;
|
|
PM = false;
|
|
O = MakeTime(WatchTime.Local.Hour, WatchTime.Local.Minute, PM);
|
|
display.setFont(&aAntiCorona36pt7b);
|
|
display.setTextColor(Options.LightMode ? GxEPD_BLACK : GxEPD_WHITE);
|
|
|
|
display.getTextBounds(O, 0, TimeY, &x1, &y1, &w, &h);
|
|
tw = (200 - w) /2;
|
|
display.setCursor(tw, TimeY);
|
|
display.println(O);
|
|
|
|
if (PM){
|
|
tw=clamp(tw + w + 6, 0, 184);
|
|
display.drawBitmap(tw, TimeY - 45, PMIndicator, 6, 6, Options.LightMode ? GxEPD_BLACK : GxEPD_WHITE);
|
|
// display.fillRect(tw, TimeY - 45 ,6 ,6, Options.LightMode ? GxEPD_BLACK : GxEPD_WHITE);
|
|
}
|
|
}
|
|
|
|
void WatchyGSR::drawDay(){
|
|
int16_t x1, y1;
|
|
uint16_t w, h;
|
|
String O;
|
|
|
|
O = dayStr(WatchTime.Local.Wday + 1);
|
|
display.setFont(&aAntiCorona16pt7b);
|
|
display.setTextColor(Options.LightMode ? GxEPD_BLACK : GxEPD_WHITE);
|
|
display.getTextBounds(O, 0, DayY, &x1, &y1, &w, &h);
|
|
w = (200 - w) /2;
|
|
display.setCursor(w, DayY);
|
|
display.println(O);
|
|
}
|
|
|
|
void WatchyGSR::drawDate(){
|
|
int16_t x1, y1;
|
|
uint16_t w, h;
|
|
String O;
|
|
|
|
display.setFont(&aAntiCorona15pt7b); //Shahd_Serif17pt7b);
|
|
display.setTextColor(Options.LightMode ? GxEPD_BLACK : GxEPD_WHITE);
|
|
O = String(monthStr(WatchTime.Local.Month)) + " " + String(WatchTime.Local.Day);
|
|
//O="September 30";
|
|
display.getTextBounds(O, 0, DateY, &x1, &y1, &w, &h);
|
|
w = (200 - w) /2;
|
|
display.setCursor(w, DateY);
|
|
display.print(O);
|
|
}
|
|
|
|
void WatchyGSR::drawYear(){
|
|
int16_t x1, y1;
|
|
uint16_t w, h, tw;
|
|
String O;
|
|
|
|
display.setFont(&aAntiCorona16pt7b);
|
|
display.setTextColor(Options.LightMode ? GxEPD_BLACK : GxEPD_WHITE);
|
|
O = String(WatchTime.Local.Year + 1900);
|
|
display.getTextBounds(O, 0, YearY, &x1, &y1, &w, &h);
|
|
w = (200 - w) /2;
|
|
display.setCursor(w, YearY);
|
|
display.print(O);
|
|
}
|
|
|
|
void WatchyGSR::drawMenu(){
|
|
int16_t x1, y1;
|
|
uint16_t w, h;
|
|
String O, S;
|
|
|
|
display.setFont(&aAntiCorona12pt7b);
|
|
display.fillRect(0, MenuTop, 200, MenuHeight, Options.LightMode ? GxEPD_WHITE : GxEPD_BLACK);
|
|
display.drawBitmap(0, MenuTop, (Menu.Style == MENU_INOPTIONS) ? OptionsMenuBackground : MenuBackground, 200, MenuHeight, Options.LightMode ? GxEPD_BLACK : GxEPD_WHITE);
|
|
display.setTextColor(Options.LightMode && Menu.Style != MENU_INNORMAL ? GxEPD_WHITE : GxEPD_BLACK);
|
|
switch (Menu.Item){
|
|
case MENU_STEPS:
|
|
if (Menu.SubItem > 0 && Menu.SubItem < 4) O = "Tomorrow";
|
|
else if (Menu.SubItem == 4) O = "Reset Today";
|
|
else O = "Steps";
|
|
break;
|
|
case MENU_ALARMS:
|
|
O = "Alarms";
|
|
break;
|
|
case MENU_TIMERS:
|
|
O = "Timers";
|
|
break;
|
|
case MENU_OPTIONS:
|
|
O = "Options";
|
|
break;
|
|
case MENU_ALARM1:
|
|
if (Menu.SubItem > 0 && Menu.SubItem < 4) O = "Alarm 1 Time";
|
|
else if (Menu.SubItem == 4) O = "A1 Tone Repeats";
|
|
else if (Menu.SubItem > 4) O = "Alarm 1 Options";
|
|
else O = "Alarm 1";
|
|
break;
|
|
case MENU_ALARM2:
|
|
if (Menu.SubItem > 0 && Menu.SubItem < 4) O = "Alarm 2 Time";
|
|
else if (Menu.SubItem == 4) O = "A2 Tone Repeats";
|
|
else if (Menu.SubItem > 4) O = "Alarm 2 Options";
|
|
else O = "Alarm 2";
|
|
break;
|
|
case MENU_ALARM3:
|
|
if (Menu.SubItem > 0 && Menu.SubItem < 4) O = "Alarm 3 Time";
|
|
else if (Menu.SubItem == 4) O = "A3 Tone Repeats";
|
|
else if (Menu.SubItem > 4) O = "Alarm 3 Options";
|
|
else O = "Alarm 3";
|
|
break;
|
|
case MENU_ALARM4:
|
|
if (Menu.SubItem > 0 && Menu.SubItem < 4) O = "Alarm 4 Time";
|
|
else if (Menu.SubItem == 4) O = "A4 Tone Repeats";
|
|
else if (Menu.SubItem > 4) O = "Alarm 4 Options";
|
|
else O = "Alarm 4";
|
|
break;
|
|
case MENU_TONES:
|
|
O = "Tone Repeats";
|
|
break;
|
|
case MENU_TIMEDN:
|
|
O = "Countdown Timer";
|
|
break;
|
|
case MENU_TIMEUP:
|
|
O = "Elapsed Timer";
|
|
break;
|
|
case MENU_DISP:
|
|
O = "Display Style";
|
|
break;
|
|
case MENU_BRDR:
|
|
O = "Border Mode";
|
|
break;
|
|
case MENU_SIDE:
|
|
O = "Dexterity";
|
|
break;
|
|
case MENU_SWAP:
|
|
O = "Menu & Back";
|
|
break;
|
|
case MENU_ORNT:
|
|
O = "Orientation";
|
|
break;
|
|
case MENU_MODE:
|
|
O = "Time Mode";
|
|
break;
|
|
case MENU_FEED:
|
|
O = "Feedback";
|
|
break;
|
|
case MENU_TRBO:
|
|
O = "Turbo Time";
|
|
break;
|
|
case MENU_DARK:
|
|
switch(Menu.SubItem){
|
|
case 0:
|
|
O = "Screen Off";
|
|
break;
|
|
case 1:
|
|
O = "Screen Blanking";
|
|
break;
|
|
case 2:
|
|
O = "Screen Auto-Off";
|
|
break;
|
|
case 3:
|
|
O = "Sleeping Begins";
|
|
break;
|
|
case 4:
|
|
O = "Sleeping Ends";
|
|
}
|
|
break;
|
|
case MENU_SAVE:
|
|
O = "Performance";
|
|
break;
|
|
case MENU_TRBL:
|
|
O = "Troubleshoot";
|
|
break;
|
|
case MENU_SYNC:
|
|
O = "Sync Watchy";
|
|
break;
|
|
case MENU_WIFI:
|
|
O = "Watchy Connect";
|
|
break;
|
|
case MENU_OTAU:
|
|
if (Menu.SubItem == 2 || Menu.SubItem == 3) O = "Upload Firmware"; else O = "OTA Update";
|
|
break;
|
|
case MENU_OTAM:
|
|
if (Menu.SubItem == 2 || Menu.SubItem == 3) O = "Visit Website"; else O = "OTA Website";
|
|
break;
|
|
case MENU_SCRN:
|
|
O = "Reset Screen";
|
|
break;
|
|
case MENU_RSET:
|
|
O = "Watchy Reboot";
|
|
break;
|
|
case MENU_TOFF:
|
|
if (WatchTime.DeadRTC) O = "Return to RTC"; else O = "Detect Travel";
|
|
}
|
|
display.getTextBounds(O, 0, HeaderY, &x1, &y1, &w, &h);
|
|
w = (196 - w) /2;
|
|
display.setCursor(w + 2, HeaderY);
|
|
display.print(O);
|
|
display.setTextColor(GxEPD_BLACK); // Only show menu in Light mode
|
|
if (Menu.Item == MENU_STEPS){ //Steps
|
|
switch (Menu.SubItem){
|
|
case 0: // Steps.
|
|
S = ""; if (Steps.Yesterday > 0) S = " (" + MakeSteps(Steps.Yesterday) + ")";
|
|
O = MakeSteps(sensor.getCounter()) + S;
|
|
break;
|
|
case 1: // Hour.
|
|
O="[" + MakeHour(Steps.Hour) + "]:" + MakeMinutes(Steps.Minutes) + MakeTOD(Steps.Hour, true);
|
|
break;
|
|
case 2: // x0 minutes.
|
|
S=MakeMinutes(Steps.Minutes);
|
|
O=MakeHour(Steps.Hour) + ":[" + S.charAt(0) + "]" + S.charAt(1) + MakeTOD(Steps.Hour, true);
|
|
break;
|
|
case 3: // 0x minutes.
|
|
S=MakeMinutes(Steps.Minutes);
|
|
O=MakeHour(Steps.Hour) + ":" + S.charAt(0) + "[" + S.charAt(1) + "]" + MakeTOD(Steps.Hour, true);
|
|
break;
|
|
case 4: // Sunday.
|
|
O = "MENU to Reset";
|
|
}
|
|
}else if (Menu.Item == MENU_ALARMS){
|
|
O = "MENU to Select";
|
|
}else if (Menu.Item >= MENU_ALARM1 && Menu.Item <= MENU_ALARM4){ // Alarms
|
|
O = "";
|
|
S=MakeMinutes(Alarms_Minutes[Menu.Item - MENU_ALARM1]);
|
|
switch (Menu.SubItem){
|
|
case 0: // Menu to Edit.
|
|
O="Menu to Edit";
|
|
break;
|
|
case 1: // Hour.
|
|
O="[" + MakeHour(Alarms_Hour[Menu.Item - MENU_ALARM1]) + "]:" + S + MakeTOD(Alarms_Hour[Menu.Item - MENU_ALARM1], false) + " " + getReduce(Alarms_Repeats[Menu.Item - MENU_ALARM1]);
|
|
break;
|
|
case 2: // x0 minutes.
|
|
O=MakeHour(Alarms_Hour[Menu.Item - MENU_ALARM1]) + ":[" + S.charAt(0) + "]" + S.charAt(1) + MakeTOD(Alarms_Hour[Menu.Item - MENU_ALARM1], false) + " " + getReduce(Alarms_Repeats[Menu.Item - MENU_ALARM1]);
|
|
break;
|
|
case 3: // 0x minutes.
|
|
O=MakeHour(Alarms_Hour[Menu.Item - MENU_ALARM1]) + ":" + S.charAt(0) + "[" + S.charAt(1) + "]" + MakeTOD(Alarms_Hour[Menu.Item - MENU_ALARM1], false) + " " + getReduce(Alarms_Repeats[Menu.Item - MENU_ALARM1]);
|
|
break;
|
|
case 4: // Repeats
|
|
O=MakeHour(Alarms_Hour[Menu.Item - MENU_ALARM1]) + ":" + S.charAt(0) + S.charAt(1) + MakeTOD(Alarms_Hour[Menu.Item - MENU_ALARM1], false) + " [" + getReduce(Alarms_Repeats[Menu.Item - MENU_ALARM1]) + "]";
|
|
break;
|
|
case 5: // Sunday.
|
|
display.setTextColor(((Alarms_Active[Menu.Item - MENU_ALARM1] & Bits[0]) == Bits[0]) ? GxEPD_WHITE : GxEPD_BLACK);
|
|
O=dayStr(1);
|
|
break;
|
|
case 6: // Monday.
|
|
display.setTextColor(((Alarms_Active[Menu.Item - MENU_ALARM1] & Bits[1]) == Bits[1]) ? GxEPD_WHITE : GxEPD_BLACK);
|
|
O=dayStr(2);
|
|
break;
|
|
case 7: // Tuesday.
|
|
display.setTextColor(((Alarms_Active[Menu.Item - MENU_ALARM1] & Bits[2]) == Bits[2]) ? GxEPD_WHITE : GxEPD_BLACK);
|
|
O=dayStr(3);
|
|
break;
|
|
case 8: // Wedmesday.
|
|
display.setTextColor(((Alarms_Active[Menu.Item - MENU_ALARM1] & Bits[3]) == Bits[3]) ? GxEPD_WHITE : GxEPD_BLACK);
|
|
O=dayStr(4);
|
|
break;
|
|
case 9: // Thursday.
|
|
display.setTextColor(((Alarms_Active[Menu.Item - MENU_ALARM1] & Bits[4]) == Bits[4]) ? GxEPD_WHITE : GxEPD_BLACK);
|
|
O=dayStr(5);
|
|
break;
|
|
case 10: // Friday.
|
|
display.setTextColor(((Alarms_Active[Menu.Item - MENU_ALARM1] & Bits[5]) == Bits[5]) ? GxEPD_WHITE : GxEPD_BLACK);
|
|
O=dayStr(6);
|
|
break;
|
|
case 11: // Saturday.
|
|
display.setTextColor(((Alarms_Active[Menu.Item - MENU_ALARM1] & Bits[6]) == Bits[6]) ? GxEPD_WHITE : GxEPD_BLACK);
|
|
O=dayStr(7);
|
|
break;
|
|
case 12: // Repeat
|
|
display.setTextColor(((Alarms_Active[Menu.Item - MENU_ALARM1] & ALARM_REPEAT) == ALARM_REPEAT) ? GxEPD_WHITE : GxEPD_BLACK);
|
|
O="Repeat";
|
|
break;
|
|
case 13: // Active
|
|
display.setTextColor(((Alarms_Active[Menu.Item - MENU_ALARM1] & ALARM_ACTIVE) == ALARM_ACTIVE) ? GxEPD_WHITE : GxEPD_BLACK);
|
|
O="Active";
|
|
}
|
|
}else if (Menu.Item == MENU_TONES){ // Repeats on Alarms.
|
|
O = getReduce(Options.MasterRepeats) + " repeats";
|
|
}else if (Menu.Item == MENU_TIMERS){ // Timers
|
|
O = "MENU to Select";
|
|
}else if (Menu.Item == MENU_TIMEDN){ // Countdown
|
|
S=MakeMinutes(TimerDown.Active ? TimerDown.Mins : TimerDown.MaxMins);
|
|
switch (Menu.SubItem){
|
|
case 0:
|
|
O = "MENU to Edit";
|
|
break;
|
|
case 1: // Hours
|
|
O="[" + String(TimerDown.Active ? TimerDown.Hours : TimerDown.MaxHours) + "]:" + S + " " + getReduce(TimerDown.MaxTones) + " " + (TimerDown.Active ? "Off" : "On");
|
|
break;
|
|
case 2: // 1x minutes.
|
|
O=String(TimerDown.Active ? TimerDown.Hours : TimerDown.MaxHours) + ":[" + S.charAt(0) + "]" + S.charAt(1) + " " + getReduce(TimerDown.MaxTones) + " " + (TimerDown.Active ? "Off" : "On");
|
|
break;
|
|
case 3: // x1 minutes.
|
|
O=String(TimerDown.Active ? TimerDown.Hours : TimerDown.MaxHours) + ":" + S.charAt(0) + "[" + S.charAt(1) + "] " + getReduce(TimerDown.MaxTones) + " " + (TimerDown.Active ? "Off" : "On");
|
|
break;
|
|
case 4: // %
|
|
O=String(TimerDown.Active ? TimerDown.Hours : TimerDown.MaxHours) + ":" + S.charAt(0) + S.charAt(1) + " [" + getReduce(TimerDown.MaxTones) + "] " + (TimerDown.Active ? "Off" : "On");
|
|
break;
|
|
case 5: // Button.
|
|
O=String(TimerDown.Active ? TimerDown.Hours : TimerDown.MaxHours) + ":" + S + " " + getReduce(TimerDown.MaxTones) + " " + (TimerDown.Active ? " [Off]" : " [On]");
|
|
}
|
|
}else if (Menu.Item == MENU_TIMEUP){ // Elapsed
|
|
switch (Menu.SubItem){
|
|
case 0:
|
|
O = "MENU to Edit";
|
|
break;
|
|
case 1:
|
|
if (TimerUp.Active) { y1 = ((WatchTime.UTC_RAW - (TimerUp.SetAt + WatchTime.UTC.Second)) / 3600); x1 = (((WatchTime.UTC_RAW - (TimerUp.SetAt + WatchTime.UTC.Second)) + 3600 * y1) / 60); }
|
|
else { y1 = ((TimerUp.StopAt - TimerUp.SetAt) / 3600); x1 = (((TimerUp.StopAt - TimerUp.SetAt) + 3600 * y1) / 60); }
|
|
O=String(y1) + ":" + MakeMinutes(x1) + (TimerUp.Active ? " [Off]" : " [On]");
|
|
}
|
|
}else if (Menu.Item == MENU_OPTIONS){ // Options Menu
|
|
O = "MENU to Enter";
|
|
}else if (Menu.Item == MENU_DISP){ // Switch Mode
|
|
if (Options.LightMode){
|
|
O = "Light";
|
|
}else {
|
|
O = "Dark";
|
|
}
|
|
}else if (Menu.Item == MENU_SIDE){ // Dexterity Mode
|
|
if (Options.Lefty){
|
|
O = "Left-handed";
|
|
}else {
|
|
O = "Right-handed";
|
|
}
|
|
}else if (Menu.Item == MENU_SWAP){ // Swap Menu/Back Buttons
|
|
if (Options.Swapped){
|
|
O = "Swapped";
|
|
}else {
|
|
O = "Normal";
|
|
}
|
|
}else if (Menu.Item == MENU_BRDR){ // Border Mode
|
|
if (Options.Border){
|
|
O = "Hide";
|
|
}else {
|
|
O = "Show";
|
|
}
|
|
}else if (Menu.Item == MENU_ORNT){ // Watchy Orientation.
|
|
if (Options.Orientated){
|
|
O = "Watchy UP";
|
|
}else {
|
|
O = "Ignore";
|
|
}
|
|
}else if (Menu.Item == MENU_MODE){ // 24hr Format Swap.
|
|
if (Options.TwentyFour){
|
|
O = "24 Hour";
|
|
}else {
|
|
O = "AM/PM";
|
|
}
|
|
}else if (Menu.Item == MENU_FEED){ // Feedback
|
|
if (Options.Feedback){
|
|
O = "Enabled";
|
|
}else {
|
|
O = (WatchTime.DeadRTC ? "Locked" : "Disabled");
|
|
}
|
|
}else if (Menu.Item == MENU_TRBO){ // Turbo!
|
|
if (Options.Turbo > 0 && !WatchTime.DeadRTC) O=String(Options.Turbo) + " " + MakeSeconds(Options.Turbo); else O = "Off";
|
|
}else if (Menu.Item == MENU_DARK){ // Dark Running.
|
|
switch(Menu.SubItem){
|
|
case 0:
|
|
O = "MENU to Change";
|
|
break;
|
|
case 1:
|
|
switch (Options.SleepStyle){
|
|
case 0:
|
|
O = "Disabled";
|
|
break;
|
|
case 1:
|
|
O = "Always";
|
|
break;
|
|
case 2:
|
|
O = "Bed Time";
|
|
}
|
|
break;
|
|
case 2:
|
|
O = String(Options.SleepMode) + " " + MakeSeconds(Options.SleepMode);
|
|
break;
|
|
case 3:
|
|
O = "[" + MakeHour(Options.SleepStart) + MakeTOD(Options.SleepStart, true) + "] to " + MakeHour(Options.SleepEnd) + MakeTOD(Options.SleepEnd, true);
|
|
break;
|
|
case 4:
|
|
O = MakeHour(Options.SleepStart) + MakeTOD(Options.SleepStart, true) + " to [" + MakeHour(Options.SleepEnd) + MakeTOD(Options.SleepEnd, true) + "]";
|
|
}
|
|
}else if (Menu.Item == MENU_SAVE){ // Performance
|
|
if (Options.Performance == 2 || WatchTime.DeadRTC) O = "Battery Saving";
|
|
else O = ((Options.Performance == 1) ? "Normal" : "Turbo");
|
|
}else if (Menu.Item == MENU_TRBL){ // Troubleshooting.
|
|
O = "MENU to Enter";
|
|
}else if (Menu.Item == MENU_SYNC){ // NTP
|
|
if (Menu.SubItem == 0){
|
|
O = "MENU to Start";
|
|
}else if (Menu.SubItem == 1){
|
|
O = "Time";
|
|
}else if (Menu.SubItem == 2){
|
|
O = "TimeZone";
|
|
}else if (Menu.SubItem == 3){
|
|
O = "TimeZone & Time";
|
|
}
|
|
}else if (Menu.Item == MENU_WIFI){ // Reset Steps.
|
|
if (Menu.SubItem == 0){
|
|
O = "MENU to Begin";
|
|
}else if (Menu.SubItem == 1){
|
|
O = "Starting AP";
|
|
}else if (Menu.SubItem == 2){
|
|
O = WiFi_AP_SSID;
|
|
}else if (Menu.SubItem == 3){
|
|
O = WiFi.softAPIP().toString();
|
|
}else if (Menu.SubItem == 4){
|
|
O = "BACK to End";
|
|
}
|
|
}else if (Menu.Item == MENU_OTAU || Menu.Item == MENU_OTAM){ // OTA Update.
|
|
if (Menu.SubItem == 0){
|
|
O = "MENU to Connect";
|
|
}else if (Menu.SubItem == 1){
|
|
O = "Connecting...";
|
|
}else if (Menu.SubItem == 2 || Menu.SubItem == 3){
|
|
O = WiFi.localIP().toString();
|
|
}
|
|
}else if (Menu.Item == MENU_SCRN){ // Reset Screen.
|
|
O = "MENU to Reset";
|
|
}else if (Menu.Item == MENU_RSET){ // Reboot Watchy
|
|
switch (Menu.SubItem){
|
|
case 1:
|
|
O = "MENU to Agree";
|
|
break;
|
|
default:
|
|
O = "MENU to Reboot";
|
|
}
|
|
}else if (Menu.Item == MENU_TOFF){ // Time Travel detect.
|
|
switch (Menu.SubItem){
|
|
case 0:
|
|
if (WatchTime.DeadRTC) O = "MENU to Change"; else O = "MENU to Start";
|
|
break;
|
|
case 1:
|
|
O = "Time Sync";
|
|
break;
|
|
case 2:
|
|
O = "Calculating";
|
|
break;
|
|
case 3:
|
|
if (WatchTime.DeadRTC) O = "Bad RTC"; else { if (Options.UsingDrift){ if (Options.Drift< 0) O = "+" + String(0 - Options.Drift) + " " + MakeSeconds(0 - Options.Drift); else O = "-" + String(Options.Drift) + " " + MakeSeconds(Options.Drift); } else O = "No Drift"; }
|
|
}
|
|
}
|
|
if (O > ""){
|
|
display.getTextBounds(O, 0, DataY, &x1, &y1, &w, &h);
|
|
w = (196 - w) /2;
|
|
display.setCursor(w + 2, DataY);
|
|
display.print(O);
|
|
}
|
|
}
|
|
|
|
void WatchyGSR::deepSleep(){
|
|
GoDark();
|
|
display.hibernate();
|
|
if (Options.NeedsSaving) RecordSettings();
|
|
esp_sleep_enable_ext0_wakeup(RTC_PIN, 0); //enable deep sleep wake on RTC interrupt
|
|
esp_sleep_enable_ext1_wakeup(BTN_PIN_MASK, ESP_EXT1_WAKEUP_ANY_HIGH); //enable deep sleep wake on button press ... |ACC_INT_MASK
|
|
esp_deep_sleep_start();
|
|
}
|
|
|
|
void WatchyGSR::GoDark(){
|
|
if ((Updates.Drawn || Battery.Direction != Battery.DarkDirection || !Darkness.Went) && !Showing())
|
|
{
|
|
Darkness.Went=true;
|
|
display.init(0,false); // Force it here so it fixes the border.
|
|
display.epd2.setDarkBorder(true);
|
|
display.fillScreen(GxEPD_BLACK);
|
|
if (getBatteryVoltage() < MinBattery) display.drawBitmap(155, 178, ChargeMe, 40, 17, GxEPD_WHITE); else if (Battery.Direction == 1) display.drawBitmap(155, 178, Charging, 40, 17, GxEPD_WHITE);
|
|
Battery.DarkDirection = Battery.Direction;
|
|
display.setFullWindow();
|
|
display.display(true);
|
|
Updates.Drawn=false;
|
|
if (WatchTime.DeadRTC) display.hibernate();
|
|
}
|
|
}
|
|
|
|
void WatchyGSR::detectBattery(){
|
|
float CBAT, BATOff;
|
|
CBAT = getBatteryVoltage(); // Check battery against previous versions to determine which direction the battery is going.
|
|
BATOff = CBAT - Battery.Last;
|
|
//Detect Power direction
|
|
|
|
if (BATOff > 0.03){
|
|
Battery.UpCount++;
|
|
if (Battery.UpCount > 3){
|
|
if (Battery.Direction == 1) Battery.Last = CBAT;
|
|
Battery.Direction = 1; Battery.UpCount = 0; Battery.DownCount = 0;
|
|
// Check if the NTP has been done.
|
|
if (WatchTime.UTC_RAW - NTPData.Last > 14400 && NTPData.State == 0){
|
|
NTPData.State = 1;
|
|
NTPData.TimeZone = (WatchTime.POSIX[0] == 0); // No Timezone, go get one!
|
|
NTPData.UpdateUTC = true;
|
|
AskForWiFi();
|
|
}
|
|
}
|
|
}else{
|
|
if (BATOff < 0.00) Battery.DownCount++;
|
|
if (Battery.DownCount > 2)
|
|
{
|
|
if (Battery.Direction == -1) Battery.Last = CBAT;
|
|
Battery.Direction = -1; Battery.UpCount = 0; Battery.DownCount = 0;
|
|
}
|
|
}
|
|
}
|
|
|
|
void WatchyGSR::ProcessNTP(){
|
|
bool B;
|
|
|
|
// Do ProgressNTP here.
|
|
switch (NTPData.State){
|
|
// Start WiFi and Connect.
|
|
case 1:{
|
|
HTTP.setUserAgent(UserAgent);
|
|
if (WiFi.status() != WL_CONNECTED){
|
|
if(currentWiFi() == WL_CONNECT_FAILED){
|
|
NTPData.Pause = 0;
|
|
NTPData.State = 99;
|
|
break;
|
|
}
|
|
}
|
|
NTPData.Wait = 0;
|
|
NTPData.Pause = 80;
|
|
NTPData.State++;
|
|
break;
|
|
}
|
|
|
|
// Am I Connected? If so, ask for NTP.
|
|
case 2:{
|
|
if (WiFi.status() != WL_CONNECTED){
|
|
if(currentWiFi() == WL_CONNECT_FAILED){
|
|
NTPData.Pause = 0;
|
|
NTPData.State = 99;
|
|
break;
|
|
}
|
|
NTPData.Pause = 80;
|
|
if (NTPData.Wait > 2){
|
|
NTPData.Pause = 0;
|
|
NTPData.State = 99;
|
|
break;
|
|
}
|
|
break;
|
|
}
|
|
if (NTPData.TimeZone == false){
|
|
NTPData.State = 5;
|
|
NTPData.Pause = 0;
|
|
break;
|
|
}
|
|
|
|
NTPData.State++;
|
|
setStatus("TZ");
|
|
// Do the next part.
|
|
HTTP.begin(WiFiC, TZURL); // Call it and leave.
|
|
NTPData.Wait = 0;
|
|
NTPData.Pause = 80;
|
|
break;
|
|
}
|
|
|
|
case 3:{
|
|
// Get GeoLocation
|
|
if (WiFi.status() == WL_DISCONNECTED){
|
|
NTPData.Pause = 0;
|
|
NTPData.State = 99;
|
|
break;
|
|
}
|
|
if (HTTP.GET() == HTTP_CODE_OK) {
|
|
String payload = HTTP.getString();
|
|
JSONVar root = JSON.parse(payload);
|
|
String S = JSON.stringify(root["timezone"]);
|
|
S.replace('"',' ');
|
|
S.trim();
|
|
WatchTime.TimeZone = S;
|
|
HTTP.end();
|
|
NTPData.Wait = 0;
|
|
NTPData.Pause = 0;
|
|
NTPData.State++; // Test
|
|
}else if (NTPData.Wait > 0){
|
|
NTPData.Pause = 0;
|
|
NTPData.State = 99;
|
|
}
|
|
break;
|
|
}
|
|
|
|
case 4:{
|
|
// Process Timezone POSIX.
|
|
String NewTZ = OP.getPOSIX(WatchTime.TimeZone);
|
|
if(NewTZ == OP.TZMISSING){
|
|
NTPData.Pause = 0;
|
|
NTPData.State = 99;
|
|
break;
|
|
}else if (NewTZ ==""){
|
|
break;
|
|
}
|
|
strcpy(WatchTime.POSIX, NewTZ.c_str());
|
|
B = NVS.setString("GSR-TZ",NewTZ);
|
|
NTPData.Wait = 0;
|
|
NTPData.Pause = 0;
|
|
NTPData.State++;
|
|
if (!NTPData.UpdateUTC) UpdateDisp=Showing();
|
|
break;
|
|
}
|
|
|
|
case 5:{
|
|
if (NTPData.UpdateUTC == false || WiFi.status() == WL_DISCONNECTED || NTPData.Wait > 0){
|
|
NTPData.State = 99;
|
|
NTPData.Pause = 0;
|
|
break;
|
|
}
|
|
NTPData.NTPDone = false;
|
|
setStatus("NTP");
|
|
configTime(0,0,"132.246.11.237","132.246.11.227");
|
|
NTPData.Wait = 0;
|
|
NTPData.Pause = 20;
|
|
NTPData.State++;
|
|
break;
|
|
}
|
|
|
|
case 6:{
|
|
if (time(nullptr) < 1000000000l){
|
|
if (NTPData.Wait > 0){
|
|
NTPData.Pause = 0;
|
|
NTPData.State = 99;
|
|
}
|
|
break;
|
|
}
|
|
WatchTime.UTC_RAW = time(nullptr);
|
|
breakTime(WatchTime.UTC_RAW,WatchTime.UTC);
|
|
RTC.write(WatchTime.UTC);
|
|
WatchTime.Drifting = 0;
|
|
WatchTime.EPSMS = (millis() + (1000 * (60 - WatchTime.UTC.Second)));
|
|
WatchTime.WatchyRTC = esp_timer_get_time() + ((60 - WatchTime.UTC.Second) * 1000000);
|
|
NTPData.NTPDone = true;
|
|
NTPData.Pause = 0;
|
|
NTPData.State = 99;
|
|
break;
|
|
}
|
|
|
|
case 99:{
|
|
OTAEnd = true;
|
|
NTPData.Wait = 0;
|
|
NTPData.Pause = 0;
|
|
NTPData.State = 0;
|
|
NTPData.Last = WatchTime.UTC_RAW; // Moved from section 6 to here, to limit the atttempts.
|
|
NTPData.UpdateUTC = false;
|
|
NTPData.TimeZone = false;
|
|
if (NTPData.TimeTest && Menu.Item == MENU_TOFF) { Menu.SubItem = 2; NTPData.TestCount = 0; }
|
|
if (NTPData.TimeTest) setStatus(""); // Clear status once it is done.
|
|
Battery.UpCount=0; // Stop it from thinking the battery went wild.
|
|
}
|
|
}
|
|
}
|
|
|
|
void WatchyGSR::drawChargeMe(){
|
|
// Shows Battery Direction indicators.
|
|
int8_t D = 0;
|
|
if (Battery.Direction == 1){
|
|
// Show Battery charging bitmap.
|
|
display.drawBitmap(155, 178, Charging, 40, 17, Options.LightMode ? GxEPD_BLACK : GxEPD_WHITE);
|
|
D = 2;
|
|
}else if (getBatteryVoltage() < MinBattery){
|
|
// Show Battery needs charging bitmap.
|
|
display.drawBitmap(155, 178, ChargeMe, 40, 17, Options.LightMode ? GxEPD_BLACK : GxEPD_WHITE);
|
|
D = 1;
|
|
}
|
|
}
|
|
|
|
void WatchyGSR::drawStatus(){
|
|
if (WatchyStatus > ""){
|
|
display.fillRect(NTPX, NTPY - 19, 60, 20, Options.LightMode ? GxEPD_WHITE : GxEPD_BLACK);
|
|
display.setFont(&Bronova_Regular13pt7b);
|
|
if (WatchyStatus.startsWith("WiFi")){
|
|
display.drawBitmap(NTPX, NTPY - 18, iWiFi, 19, 19, Options.LightMode ? GxEPD_BLACK : GxEPD_WHITE);
|
|
if (WatchyStatus.length() > 4){
|
|
display.setCursor(NTPX + 17, NTPY);
|
|
display.setTextColor(Options.LightMode ? GxEPD_BLACK : GxEPD_WHITE);
|
|
display.print(WatchyStatus.substring(4));
|
|
}
|
|
}
|
|
else if (WatchyStatus == "TZ") display.drawBitmap(NTPX, NTPY - 18, iTZ, 19, 19, Options.LightMode ? GxEPD_BLACK : GxEPD_WHITE);
|
|
else if (WatchyStatus == "NTP") display.drawBitmap(NTPX, NTPY - 18, iSync, 19, 19, Options.LightMode ? GxEPD_BLACK : GxEPD_WHITE);
|
|
else if (WatchyStatus == "ESP") display.drawBitmap(NTPX, NTPY - 18, iSync, 19, 19, Options.LightMode ? GxEPD_BLACK : GxEPD_WHITE);
|
|
else{
|
|
display.setCursor(NTPX + 17, NTPY);
|
|
display.setTextColor(Options.LightMode ? GxEPD_BLACK : GxEPD_WHITE);
|
|
display.setCursor(NTPX, NTPY);
|
|
display.print(WatchyStatus);
|
|
}
|
|
}
|
|
}
|
|
|
|
void WatchyGSR::setStatus(String Status){
|
|
if (WatchyStatus != Status){
|
|
WatchyStatus = Status;
|
|
UpdateDisp=Showing();
|
|
}
|
|
}
|
|
|
|
void WatchyGSR::VibeTo(bool Mode){
|
|
if (Mode != VibeMode){
|
|
if (Mode){
|
|
sensor.enableFeature(BMA423_WAKEUP, false);
|
|
pinMode(VIB_MOTOR_PIN, OUTPUT);
|
|
digitalWrite(VIB_MOTOR_PIN, true);
|
|
}else{
|
|
digitalWrite(VIB_MOTOR_PIN, false);
|
|
sensor.enableFeature(BMA423_WAKEUP, true);
|
|
}
|
|
VibeMode = Mode;
|
|
}
|
|
}
|
|
|
|
/*
|
|
void WatchyGSR::handleAccelerometer(){
|
|
uint8_t Direction;
|
|
|
|
//Serial.println("Accel int.");
|
|
if (sensor.isTilt()){
|
|
DBug("Tilt!!!");
|
|
Direction = sensor.getDirection(); // Directional screen on. == DIRECTION_DISP_UP
|
|
if ((Direction == DIRECTION_DISP_UP) != ScreenOn){
|
|
UpdateDisp = true; // Update Screen to new state.
|
|
}
|
|
}else if (sensor.isDoubleClick()){
|
|
DBug("Double Tap!");
|
|
}
|
|
}*/
|
|
|
|
void WatchyGSR::handleButtonPress(uint8_t Pressed){
|
|
uint8_t Direction;
|
|
int ml, mh;
|
|
|
|
// Check to see if screen is upward, if it is/isn't, make sure it matches.
|
|
Direction = sensor.getDirection(); // Directional screen on. == DIRECTION_DISP_UP
|
|
|
|
/* Not sure if this Wrist wake is worth the effort or the battery abuse.
|
|
if (wakeupBit & ACC_INT_MASK){ // Movement caused this.
|
|
//Serial.println("Accel int.");
|
|
if ((Direction == DIRECTION_DISP_UP) != ScreenOn){
|
|
UpdateDisp = true; // Update Screen to new state.
|
|
}
|
|
}
|
|
*/
|
|
|
|
if (Options.Orientated) { if (Direction != DIRECTION_DISP_UP && Direction != DIRECTION_TOP_EDGE) return; } // Don't accept it.
|
|
if (LastButton > 0 && (millis() - LastButton) < KEYPAUSE) return;
|
|
if (Darkness.Went) { Darkness.Last=millis(); UpdateDisp=true; return; } // Don't do the button, just exit.
|
|
|
|
switch (Pressed){
|
|
case 1:
|
|
if (GuiMode != MENUON){
|
|
GuiMode = MENUON;
|
|
DoHaptic = true;
|
|
UpdateDisp = true; // Quick Update.
|
|
SetTurbo();
|
|
}else if (GuiMode == MENUON){
|
|
if (Menu.Item == MENU_OPTIONS && Menu.SubItem == 0){ // Options
|
|
Menu.Item = MENU_DISP;
|
|
Menu.Style = MENU_INOPTIONS;
|
|
DoHaptic = true;
|
|
UpdateDisp = true; // Quick Update.
|
|
SetTurbo();
|
|
}else if (Menu.Item == MENU_TRBL && Menu.SubItem == 0){ // Troubleshooting.
|
|
Menu.Style = MENU_INTROUBLE;
|
|
Menu.Item = MENU_SCRN;
|
|
DoHaptic = true;
|
|
UpdateDisp = true;
|
|
SetTurbo();
|
|
}else if (Menu.Item == MENU_STEPS){ // Steps
|
|
if (Menu.SubItem == 4){
|
|
sensor.resetStepCounter();
|
|
Menu.SubItem = 0;
|
|
DoHaptic = true;
|
|
UpdateDisp = true; // Quick Update.
|
|
SetTurbo();
|
|
}else if (Menu.SubItem < 4){
|
|
Menu.SubItem++;
|
|
DoHaptic = true;
|
|
UpdateDisp = true; // Quick Update.
|
|
SetTurbo();
|
|
}
|
|
}else if (Menu.Item == MENU_ALARMS){ // Alarms menu.
|
|
Menu.Style = MENU_INALARMS;
|
|
Menu.Item = MENU_ALARM1;
|
|
DoHaptic = true;
|
|
UpdateDisp = true;
|
|
SetTurbo();
|
|
}else if (Menu.Item >= MENU_ALARM1 && Menu.Item <= MENU_ALARM4){ // Alarms
|
|
if (Menu.SubItem < 5){
|
|
Menu.SubItem++;
|
|
if (Menu.SubItem == 5) Menu.SubItem += WatchTime.Local.Wday; // Jump ahead to the day.
|
|
DoHaptic = true;
|
|
UpdateDisp = true; // Quick Update.
|
|
SetTurbo();
|
|
}else if (Menu.SubItem > 4 && Menu.SubItem < 12){
|
|
Alarms_Active[Menu.Item - MENU_ALARM1] ^= Bits[Menu.SubItem - 5]; // Toggle day.
|
|
Options.NeedsSaving = true;
|
|
DoHaptic = true;
|
|
UpdateDisp = true; // Quick Update.
|
|
SetTurbo();
|
|
}else if (Menu.SubItem == 12){
|
|
Alarms_Active[Menu.Item - MENU_ALARM1] ^= ALARM_REPEAT; // Toggle repeat.
|
|
Options.NeedsSaving = true;
|
|
DoHaptic = true;
|
|
UpdateDisp = true; // Quick Update.
|
|
SetTurbo();
|
|
}else if (Menu.SubItem == 13){
|
|
Alarms_Active[Menu.Item - MENU_ALARM1] ^= ALARM_ACTIVE; // Toggle Active.
|
|
Options.NeedsSaving = true;
|
|
DoHaptic = true;
|
|
UpdateDisp = true; // Quick Update.
|
|
SetTurbo();
|
|
}
|
|
}else if (Menu.Item == MENU_TONES){ // Tones.
|
|
Options.MasterRepeats = roller(Options.MasterRepeats + 1, (WatchTime.DeadRTC ? 4 : 0), 4);
|
|
Alarms_Repeats[0] = Options.MasterRepeats;
|
|
Alarms_Repeats[1] = Options.MasterRepeats;
|
|
Alarms_Repeats[2] = Options.MasterRepeats;
|
|
Alarms_Repeats[3] = Options.MasterRepeats;
|
|
Options.NeedsSaving = true;
|
|
DoHaptic = true;
|
|
UpdateDisp = true; // Quick Update.
|
|
SetTurbo();
|
|
}else if (Menu.Item == MENU_TIMERS){ // Timers menu.
|
|
Menu.Style = MENU_INTIMERS;
|
|
Menu.Item = MENU_TIMEDN;
|
|
DoHaptic = true;
|
|
UpdateDisp = true;
|
|
SetTurbo();
|
|
}else if (Menu.Item == MENU_TIMEDN){
|
|
if (Menu.SubItem == 5){
|
|
if (TimerDown.Active){
|
|
TimerDown.Active=false;
|
|
DoHaptic = true;
|
|
UpdateDisp = true; // Quick Update.
|
|
SetTurbo();
|
|
}else if ((TimerDown.MaxMins + TimerDown.MaxHours) > 0){
|
|
TimerDown.Mins = TimerDown.MaxMins;
|
|
TimerDown.Hours = TimerDown.MaxHours;
|
|
TimerDown.LastUTC = WatchTime.UTC_RAW - WatchTime.UTC.Second;
|
|
TimerDown.Active = true;
|
|
DoHaptic = true;
|
|
UpdateDisp = true; // Quick Update.
|
|
SetTurbo();
|
|
}
|
|
}else{
|
|
Menu.SubItem++;
|
|
if (TimerDown.MaxMins + TimerDown.MaxHours == 0 && Menu.SubItem == 5) Menu.SubItem = 4; //Stop it from being startable.
|
|
if (TimerDown.Active) Menu.SubItem = 5;
|
|
DoHaptic = true;
|
|
UpdateDisp = true; // Quick Update.
|
|
SetTurbo();
|
|
}
|
|
}else if (Menu.Item == MENU_TIMEUP){
|
|
if (Menu.SubItem == 0){
|
|
Menu.SubItem = 1;
|
|
DoHaptic = true;
|
|
UpdateDisp = true; // Quick Update.
|
|
SetTurbo();
|
|
}else{
|
|
if (TimerUp.Active){
|
|
TimerUp.StopAt = WatchTime.UTC_RAW - WatchTime.UTC.Second;
|
|
TimerUp.Active = false;
|
|
}else{
|
|
TimerUp.SetAt = WatchTime.UTC_RAW - WatchTime.UTC.Second;
|
|
TimerUp.StopAt = TimerUp.SetAt;
|
|
TimerUp.Active = true;
|
|
}
|
|
DoHaptic = true;
|
|
UpdateDisp = true; // Quick Update.
|
|
SetTurbo();
|
|
}
|
|
}else if (Menu.Item == MENU_SAVE && !WatchTime.DeadRTC){ // Battery Saver.
|
|
Options.Performance = roller(Options.Performance + 1,0,2);
|
|
Options.NeedsSaving = true;
|
|
DoHaptic = true;
|
|
UpdateDisp = true; // Quick Update.
|
|
SetTurbo();
|
|
}else if (Menu.Item == MENU_SYNC){ // Sync Time
|
|
if (Menu.SubItem == 0){
|
|
Menu.SubItem++;
|
|
DoHaptic = true;
|
|
UpdateDisp = true; // Quick Update.
|
|
SetTurbo();
|
|
}else{
|
|
NTPData.State = 1;
|
|
switch (Menu.SubItem){
|
|
case 1:
|
|
NTPData.UpdateUTC = true;
|
|
NTPData.TimeZone = (WatchTime.POSIX[0] == 0); // No Timezone, go get one!
|
|
break;
|
|
case 2:
|
|
NTPData.UpdateUTC = false;
|
|
NTPData.TimeZone = true;
|
|
break;
|
|
case 3:
|
|
NTPData.TimeZone = true;
|
|
NTPData.UpdateUTC = true;
|
|
}
|
|
GuiMode = WATCHON;
|
|
Menu.Item = MENU_DISP;
|
|
Menu.SubItem = 0;
|
|
DoHaptic = true;
|
|
UpdateDisp = true; // Quick Update.
|
|
SetTurbo();
|
|
AskForWiFi();
|
|
}
|
|
}else if (Menu.Item == MENU_DISP){ // Switch Mode
|
|
Options.LightMode = !Options.LightMode;
|
|
Options.NeedsSaving = true;
|
|
Updates.Full = true;
|
|
DoHaptic = true;
|
|
UpdateDisp = true; // Quick Update.
|
|
SetTurbo();
|
|
}else if (Menu.Item == MENU_SIDE){ // Dexterity Mode
|
|
Options.Lefty = !Options.Lefty;
|
|
Options.NeedsSaving = true;
|
|
DoHaptic = true;
|
|
UpdateDisp = true; // Quick Update.
|
|
SetTurbo();
|
|
}else if (Menu.Item == MENU_SWAP){ // Swap Menu/Back Buttons
|
|
Options.Swapped = !Options.Swapped;
|
|
Options.NeedsSaving = true;
|
|
DoHaptic = true;
|
|
UpdateDisp = true; // Quick Update.
|
|
SetTurbo();
|
|
}else if (Menu.Item == MENU_BRDR){ // Border Mode
|
|
Options.Border = !Options.Border;
|
|
Options.NeedsSaving = true;
|
|
display.init(0,false); // Force it here so it fixes the border.
|
|
DoHaptic = true;
|
|
UpdateDisp = true; // Quick Update.
|
|
SetTurbo();
|
|
}else if (Menu.Item == MENU_ORNT){ // Watchy Orientation
|
|
Options.Orientated = !Options.Orientated;
|
|
Options.NeedsSaving = true;
|
|
DoHaptic = true;
|
|
UpdateDisp = true; // Quick Update.
|
|
SetTurbo();
|
|
}else if (Menu.Item == MENU_MODE){ // Switch Time Mode
|
|
Options.TwentyFour = !Options.TwentyFour;
|
|
Options.NeedsSaving = true;
|
|
DoHaptic = true;
|
|
UpdateDisp = true; // Quick Update.
|
|
SetTurbo();
|
|
}else if (Menu.Item == MENU_FEED && !WatchTime.DeadRTC){ // Feedback.
|
|
Options.Feedback = !Options.Feedback;
|
|
Options.NeedsSaving = true;
|
|
DoHaptic = true;
|
|
UpdateDisp = true; // Quick Update.
|
|
SetTurbo();
|
|
}else if (Menu.Item == MENU_TRBO && !WatchTime.DeadRTC){ // Turbo
|
|
Options.Turbo = roller(Options.Turbo + 1, 0, 10);
|
|
Options.NeedsSaving = true;
|
|
DoHaptic = true;
|
|
UpdateDisp = true; // Quick Update.
|
|
SetTurbo();
|
|
}else if (Menu.Item == MENU_DARK){ // Sleep Mode.
|
|
if (Menu.SubItem < 4){
|
|
Menu.SubItem++;
|
|
DoHaptic = true;
|
|
UpdateDisp = true; // Quick Update.
|
|
SetTurbo();
|
|
}
|
|
}else if (Menu.Item == MENU_SCRN){ // Reset Screen
|
|
GuiMode = WATCHON;
|
|
DoHaptic = true;
|
|
UpdateDisp = true; // Quick Update.
|
|
Updates.Full = true;
|
|
SetTurbo();
|
|
}else if (Menu.Item == MENU_WIFI){ // Watchy Connect
|
|
Menu.SubItem++;
|
|
WatchyAPOn = true;
|
|
DoHaptic = true;
|
|
UpdateDisp = true; // Quick Update.
|
|
SetTurbo();
|
|
}else if (Menu.Item == MENU_OTAU || Menu.Item == MENU_OTAM){ // Watchy OTA
|
|
Menu.SubItem++;
|
|
OTAUpdate=true;
|
|
DoHaptic = true;
|
|
UpdateDisp = true; // Quick Update.
|
|
SetTurbo();
|
|
AskForWiFi();
|
|
}else if (Menu.Item == MENU_RSET){ // Watchy Reboot
|
|
if (Menu.SubItem == 1) ESP.restart(); else Menu.SubItem++;
|
|
DoHaptic = true;
|
|
UpdateDisp = true; // Quick Update.
|
|
SetTurbo();
|
|
}else if (Menu.Item == MENU_TOFF && NTPData.State == 0 && Menu.SubItem == 0){ // Detect Drift
|
|
if (WatchTime.DeadRTC){
|
|
Options.NeedsSaving = true;
|
|
WatchTime.DeadRTC = false;
|
|
}else{
|
|
NTPData.TimeTest = true;
|
|
NTPData.State = 1;
|
|
Menu.SubItem = 1;
|
|
NTPData.UpdateUTC = true;
|
|
AskForWiFi();
|
|
}
|
|
DoHaptic = true;
|
|
UpdateDisp = true; // Quick Update.
|
|
SetTurbo();
|
|
}
|
|
}
|
|
break;
|
|
case 2:
|
|
if (GuiMode == MENUON){ // Back Button [SW2]
|
|
if (Menu.Item == MENU_STEPS && Menu.SubItem > 0) { // Exit for Steps, back to Steps.
|
|
if (Menu.SubItem == 4) Menu.SubItem = 2; // Go back to the Hour, so it is the same as the alarms.
|
|
Menu.SubItem--;
|
|
DoHaptic = true;
|
|
UpdateDisp = true; // Quick Update.
|
|
SetTurbo();
|
|
}else if (Menu.Item >= MENU_ALARM1 && Menu.Item <= MENU_ALARM4 && Menu.SubItem > 0){
|
|
if (Menu.SubItem < 5 && Menu.SubItem > 0){
|
|
Menu.SubItem--;
|
|
}else if (Menu.SubItem > 4){
|
|
Menu.SubItem = 1;
|
|
}
|
|
DoHaptic = true;
|
|
UpdateDisp = true; // Quick Update.
|
|
SetTurbo();
|
|
}else if (Menu.Item == MENU_TIMEDN && Menu.SubItem > 0){
|
|
Menu.SubItem--;
|
|
if (TimerDown.Active) Menu.SubItem = 0;
|
|
DoHaptic = true;
|
|
UpdateDisp = true; // Quick Update.
|
|
SetTurbo();
|
|
}else if (Menu.Item == MENU_TIMEUP && Menu.SubItem > 0){
|
|
Menu.SubItem = 0;
|
|
DoHaptic = true;
|
|
UpdateDisp = true; // Quick Update.
|
|
SetTurbo();
|
|
}else if (Menu.Item == MENU_DARK && Menu.SubItem > 0){ // Sleep Mode.
|
|
Menu.SubItem--;
|
|
DoHaptic = true;
|
|
UpdateDisp = true; // Quick Update.
|
|
SetTurbo();
|
|
}else if (Menu.Item == MENU_SYNC && Menu.SubItem > 0){
|
|
Menu.SubItem = 0;
|
|
DoHaptic = true;
|
|
UpdateDisp = true; // Quick Update.
|
|
SetTurbo();
|
|
}else if (Menu.Item == MENU_WIFI && Menu.SubItem > 0){
|
|
Menu.SubItem = 0;
|
|
DoHaptic = true;
|
|
UpdateDisp = true; // Quick Update.
|
|
SetTurbo();
|
|
}else if ((Menu.Item == MENU_OTAU || Menu.Item == MENU_OTAM) && Menu.SubItem > 0){
|
|
break; // DO NOTHING!
|
|
}else if (Menu.Style == MENU_INALARMS){ // Alarms
|
|
Menu.Style = MENU_INNORMAL;
|
|
Menu.Item = MENU_ALARMS;
|
|
DoHaptic = true;
|
|
UpdateDisp = true;
|
|
SetTurbo();
|
|
}else if (Menu.Style == MENU_INTIMERS){ // Timers
|
|
Menu.Style = MENU_INNORMAL;
|
|
Menu.Item = MENU_TIMERS;
|
|
DoHaptic = true;
|
|
UpdateDisp = true;
|
|
SetTurbo();
|
|
}else if (Menu.Style == MENU_INOPTIONS){ // Options
|
|
Menu.SubItem = 0;
|
|
Menu.SubSubItem = 0;
|
|
Menu.Item=MENU_OPTIONS;
|
|
Menu.Style=MENU_INNORMAL;
|
|
DoHaptic = true;
|
|
UpdateDisp = true; // Quick Update.
|
|
SetTurbo();
|
|
}else if (Menu.Style == MENU_INTROUBLE && Menu.SubItem == 0){ // Troubleshooting.
|
|
Menu.SubItem = 0;
|
|
Menu.SubSubItem = 0;
|
|
Menu.Item=MENU_TRBL;
|
|
Menu.Style=MENU_INOPTIONS;
|
|
DoHaptic = true;
|
|
UpdateDisp = true; // Quick Update.
|
|
SetTurbo();
|
|
}else if (Menu.Item == MENU_RSET && Menu.SubItem > 0){ // Watchy Reboot
|
|
Menu.SubItem--;
|
|
}else if (Menu.Item == MENU_TOFF && Menu.SubItem > 0){ // Drift Travel
|
|
if (Menu.SubItem == 3){
|
|
Menu.SubItem = 0;
|
|
Menu.SubSubItem = 0;
|
|
DoHaptic = true;
|
|
UpdateDisp = true; // Quick Update.
|
|
SetTurbo();
|
|
}
|
|
}else{
|
|
GuiMode = WATCHON;
|
|
Menu.SubItem = 0;
|
|
Menu.SubSubItem = 0;
|
|
DoHaptic = true;
|
|
UpdateDisp = true; // Quick Update.
|
|
SetTurbo();
|
|
}
|
|
}
|
|
break;
|
|
case 3:
|
|
if (GuiMode == MENUON){ // Up Button [SW3]
|
|
// Handle the sideways choices here.
|
|
if (Menu.Item == MENU_STEPS && Menu.SubItem > 0){
|
|
switch (Menu.SubItem){
|
|
case 1: // Hour
|
|
Steps.Hour=roller(Steps.Hour + 1, 0,23);
|
|
Options.NeedsSaving = true;
|
|
Steps.Reset = false;
|
|
DoHaptic = true;
|
|
UpdateDisp = true; // Quick Update.
|
|
SetTurbo();
|
|
break;
|
|
case 2: // x0 Minutes
|
|
mh = (Steps.Minutes / 10);
|
|
ml = Steps.Minutes - (mh * 10);
|
|
mh = roller(mh + 1, 0, 5);
|
|
Steps.Minutes = (mh * 10) + ml;
|
|
Steps.Reset = false;
|
|
Options.NeedsSaving = true;
|
|
DoHaptic = true;
|
|
UpdateDisp = true; // Quick Update.
|
|
SetTurbo();
|
|
break;
|
|
case 3: // x0 Minutes
|
|
mh = (Steps.Minutes / 10);
|
|
ml = Steps.Minutes - (mh * 10);
|
|
ml = roller(ml + 1, 0, 9);
|
|
Steps.Minutes = (mh * 10) + ml;
|
|
Steps.Reset = false;
|
|
Options.NeedsSaving = true;
|
|
DoHaptic = true;
|
|
UpdateDisp = true; // Quick Update.
|
|
SetTurbo();
|
|
}
|
|
}else if (Menu.Item >= MENU_ALARM1 && Menu.Item <= MENU_ALARM4 && Menu.SubItem > 0){
|
|
if (Menu.SubItem == 1){ // Hour
|
|
Alarms_Hour[Menu.Item - MENU_ALARM1]=roller(Alarms_Hour[Menu.Item - MENU_ALARM1] + 1, 0,23);
|
|
Alarms_Active[Menu.Item - MENU_ALARM1] &= ALARM_NOTRIGGER;
|
|
Options.NeedsSaving = true;
|
|
DoHaptic = true;
|
|
UpdateDisp = true; // Quick Update.
|
|
SetTurbo();
|
|
}else if (Menu.SubItem == 2){ // x0 Minutes
|
|
mh = (Alarms_Minutes[Menu.Item - MENU_ALARM1] / 10);
|
|
ml = Alarms_Minutes[Menu.Item - MENU_ALARM1] - (mh * 10);
|
|
mh = roller(mh + 1, 0, 5);
|
|
Alarms_Minutes[Menu.Item - MENU_ALARM1] = (mh * 10) + ml;
|
|
Alarms_Active[Menu.Item - MENU_ALARM1] &= ALARM_NOTRIGGER;
|
|
Options.NeedsSaving = true;
|
|
DoHaptic = true;
|
|
UpdateDisp = true; // Quick Update.
|
|
SetTurbo();
|
|
}else if (Menu.SubItem == 3){ // x0 Minutes
|
|
mh = (Alarms_Minutes[Menu.Item - MENU_ALARM1] / 10);
|
|
ml = Alarms_Minutes[Menu.Item - MENU_ALARM1] - (mh * 10);
|
|
ml = roller(ml + 1, 0, 9);
|
|
Alarms_Minutes[Menu.Item - MENU_ALARM1] = (mh * 10) + ml;
|
|
Alarms_Active[Menu.Item - MENU_ALARM1] &= ALARM_NOTRIGGER;
|
|
Options.NeedsSaving = true;
|
|
DoHaptic = true;
|
|
UpdateDisp = true; // Quick Update.
|
|
SetTurbo();
|
|
}else if (Menu.SubItem == 4){ // Repeats.
|
|
Alarms_Repeats[Menu.Item - MENU_ALARM1] = roller(Alarms_Repeats[Menu.Item - MENU_ALARM1] - 1, (WatchTime.DeadRTC ? 4 : 0), 4);
|
|
Options.NeedsSaving = true;
|
|
DoHaptic = true;
|
|
UpdateDisp = true; // Quick Update.
|
|
SetTurbo();
|
|
}else if (Menu.SubItem > 4){
|
|
Menu.SubItem = roller(Menu.SubItem + 1, 5, 13);
|
|
Options.NeedsSaving = true;
|
|
DoHaptic = true;
|
|
UpdateDisp = true; // Quick Update.
|
|
SetTurbo();
|
|
}
|
|
} else if (Menu.Item == MENU_TIMEDN && Menu.SubItem > 0){
|
|
switch (Menu.SubItem){
|
|
case 1: // Hour
|
|
TimerDown.MaxHours=roller(TimerDown.MaxHours + 1, 0,23);
|
|
StopCD();
|
|
Options.NeedsSaving = true;
|
|
DoHaptic = true;
|
|
UpdateDisp = true; // Quick Update.
|
|
SetTurbo();
|
|
break;
|
|
case 2: // x0 Minutes
|
|
mh = (TimerDown.MaxMins / 10);
|
|
ml = TimerDown.MaxMins - (mh * 10);
|
|
mh = roller(mh + 1, 0, 5);
|
|
TimerDown.MaxMins = (mh * 10) + ml;
|
|
StopCD();
|
|
Options.NeedsSaving = true;
|
|
DoHaptic = true;
|
|
UpdateDisp = true; // Quick Update.
|
|
SetTurbo();
|
|
break;
|
|
case 3: // x0 Minutes
|
|
mh = (TimerDown.MaxMins / 10);
|
|
ml = TimerDown.MaxMins - (mh * 10);
|
|
ml = roller(ml + 1, 0, 9);
|
|
TimerDown.MaxMins = (mh * 10) + ml;
|
|
StopCD();
|
|
Options.NeedsSaving = true;
|
|
DoHaptic = true;
|
|
UpdateDisp = true; // Quick Update.
|
|
SetTurbo();
|
|
break;
|
|
case 4: //Repeats
|
|
TimerDown.MaxTones = roller(TimerDown.MaxTones - 1, (WatchTime.DeadRTC ? 4 : 0), 4);
|
|
StopCD();
|
|
Options.NeedsSaving = true;
|
|
DoHaptic = true;
|
|
UpdateDisp = true; // Quick Update.
|
|
SetTurbo();
|
|
}
|
|
}else if (Menu.Item == MENU_DARK && Menu.SubItem > 0){ // Sleep Mode.
|
|
switch (Menu.SubItem){
|
|
case 1: // Style.
|
|
Options.SleepStyle = roller(Options.SleepStyle + 1, (WatchTime.DeadRTC ? 1 : 0), 2);
|
|
Options.NeedsSaving = true;
|
|
break;
|
|
case 2: // SleepMode (0=off, 10 seconds)
|
|
Options.SleepMode = roller(Options.SleepMode + 1, 1, 10);
|
|
Options.NeedsSaving = true;
|
|
break;
|
|
case 3: // SleepStart (hour)
|
|
if (Options.SleepStart + 1 != Options.SleepEnd) { Options.SleepStart = roller(Options.SleepStart + 1, 0,23); Options.NeedsSaving = true; } else return;
|
|
break;
|
|
case 4: // SleepStart (hour)
|
|
if (Options.SleepEnd + 1 != Options.SleepStart) { Options.SleepEnd = roller(Options.SleepEnd + 1, 0,23); Options.NeedsSaving = true; } else return;
|
|
break;
|
|
}
|
|
DoHaptic = true;
|
|
UpdateDisp = true; // Quick Update.
|
|
SetTurbo();
|
|
}else if (Menu.Item == MENU_SYNC && Menu.SubItem > 0){
|
|
Menu.SubItem = roller(Menu.SubItem - 1, 1, 3);
|
|
DoHaptic = true;
|
|
UpdateDisp = true; // Quick Update.
|
|
SetTurbo();
|
|
}else if (Menu.Item == MENU_WIFI && Menu.SubItem > 0){
|
|
// Do nothing!
|
|
}else if (Menu.Item == MENU_TOFF && Menu.SubItem > 0){
|
|
// Do nothing!
|
|
}else{
|
|
if (Menu.Style == MENU_INOPTIONS){
|
|
Menu.Item = roller(Menu.Item - 1, MENU_DISP, (NTPData.State > 0 || WatchyAPOn || OTAUpdate || getBatteryVoltage() < MinBattery) ? MENU_TRBL : MENU_OTAM);
|
|
}else if (Menu.Style == MENU_INALARMS){
|
|
Menu.Item = roller(Menu.Item - 1, MENU_ALARM1, MENU_TONES);
|
|
}else if (Menu.Style == MENU_INTIMERS){
|
|
Menu.Item = roller(Menu.Item - 1, MENU_TIMEDN, MENU_TIMEUP);
|
|
}else if (Menu.Style == MENU_INTROUBLE){
|
|
Menu.Item = roller(Menu.Item - 1, MENU_SCRN, MENU_TOFF);
|
|
}else{
|
|
Menu.Item = roller(Menu.Item - 1, MENU_STEPS, MENU_OPTIONS);
|
|
}
|
|
Menu.SubItem=0;
|
|
Menu.SubSubItem=0;
|
|
DoHaptic = true;
|
|
UpdateDisp = true; // Quick Update.
|
|
SetTurbo();
|
|
}
|
|
}
|
|
break;
|
|
case 4:
|
|
if (GuiMode == MENUON){ // Down Button [SW4]
|
|
// Handle the sideways choices here.
|
|
if (Menu.Item == MENU_STEPS && Menu.SubItem > 0){
|
|
switch (Menu.SubItem){
|
|
case 1: // Hour
|
|
Steps.Hour=roller(Steps.Hour - 1, 0,23);
|
|
Options.NeedsSaving = true;
|
|
Steps.Reset = false;
|
|
DoHaptic = true;
|
|
UpdateDisp = true; // Quick Update.
|
|
SetTurbo();
|
|
break;
|
|
case 2: // x0 Minutes
|
|
mh = (Steps.Minutes / 10);
|
|
ml = Steps.Minutes - (mh * 10);
|
|
mh = roller(mh - 1, 0, 5);
|
|
Steps.Minutes = (mh * 10) + ml;
|
|
Steps.Reset = false;
|
|
Options.NeedsSaving = true;
|
|
DoHaptic = true;
|
|
UpdateDisp = true; // Quick Update.
|
|
SetTurbo();
|
|
break;
|
|
case 3: // x0 Minutes
|
|
mh = (Steps.Minutes / 10);
|
|
ml = Steps.Minutes - (mh * 10);
|
|
ml = roller(ml - 1, 0, 9);
|
|
Steps.Minutes = (mh * 10) + ml;
|
|
Steps.Reset = false;
|
|
Options.NeedsSaving = true;
|
|
DoHaptic = true;
|
|
UpdateDisp = true; // Quick Update.
|
|
SetTurbo();
|
|
}
|
|
}else if (Menu.Item >= MENU_ALARM1 && Menu.Item <= MENU_ALARM4 && Menu.SubItem > 0){
|
|
if (Menu.SubItem == 1){ // Hour
|
|
Alarms_Hour[Menu.Item - MENU_ALARM1]=roller(Alarms_Hour[Menu.Item - MENU_ALARM1] - 1, 0,23);
|
|
Alarms_Active[Menu.Item - MENU_ALARM1] &= ALARM_NOTRIGGER;
|
|
Options.NeedsSaving = true;
|
|
DoHaptic = true;
|
|
UpdateDisp = true; // Quick Update.
|
|
SetTurbo();
|
|
}else if (Menu.SubItem == 2){ // x0 Minutes
|
|
mh = (Alarms_Minutes[Menu.Item - MENU_ALARM1] / 10);
|
|
ml = Alarms_Minutes[Menu.Item - MENU_ALARM1] - (mh * 10);
|
|
mh = roller(mh - 1, 0, 5);
|
|
Alarms_Minutes[Menu.Item - MENU_ALARM1] = (mh * 10) + ml;
|
|
Alarms_Active[Menu.Item - MENU_ALARM1] &= ALARM_NOTRIGGER;
|
|
Options.NeedsSaving = true;
|
|
DoHaptic = true;
|
|
UpdateDisp = true; // Quick Update.
|
|
SetTurbo();
|
|
}else if (Menu.SubItem == 3){ // x0 Minutes
|
|
mh = (Alarms_Minutes[Menu.Item - MENU_ALARM1] / 10);
|
|
ml = Alarms_Minutes[Menu.Item - MENU_ALARM1] - (mh * 10);
|
|
ml = roller(ml - 1, 0, 9);
|
|
Alarms_Minutes[Menu.Item - MENU_ALARM1] = (mh * 10) + ml;
|
|
Alarms_Active[Menu.Item - MENU_ALARM1] &= ALARM_NOTRIGGER;
|
|
Options.NeedsSaving = true;
|
|
DoHaptic = true;
|
|
UpdateDisp = true; // Quick Update.
|
|
SetTurbo();
|
|
}else if (Menu.SubItem == 4){ // Repeats.
|
|
Alarms_Repeats[Menu.Item - MENU_ALARM1] = roller(Alarms_Repeats[Menu.Item - MENU_ALARM1] + 1, (WatchTime.DeadRTC ? 4 : 0), 4);
|
|
Options.NeedsSaving = true;
|
|
DoHaptic = true;
|
|
UpdateDisp = true; // Quick Update.
|
|
SetTurbo();
|
|
}else if (Menu.SubItem > 4){
|
|
Menu.SubItem = roller(Menu.SubItem - 1, 5, 13);
|
|
Options.NeedsSaving = true;
|
|
DoHaptic = true;
|
|
UpdateDisp = true; // Quick Update.
|
|
SetTurbo();
|
|
}
|
|
} else if (Menu.Item == MENU_TIMEDN && Menu.SubItem > 0){
|
|
switch (Menu.SubItem){
|
|
case 1: // Hour
|
|
TimerDown.MaxHours=roller(TimerDown.MaxHours - 1, 0,23);
|
|
StopCD();
|
|
Options.NeedsSaving = true;
|
|
DoHaptic = true;
|
|
UpdateDisp = true; // Quick Update.
|
|
SetTurbo();
|
|
break;
|
|
case 2: // x0 Minutes
|
|
mh = (TimerDown.MaxMins / 10);
|
|
ml = TimerDown.MaxMins - (mh * 10);
|
|
mh = roller(mh - 1, 0, 5);
|
|
TimerDown.MaxMins = (mh * 10) + ml;
|
|
StopCD();
|
|
Options.NeedsSaving = true;
|
|
DoHaptic = true;
|
|
UpdateDisp = true; // Quick Update.
|
|
SetTurbo();
|
|
break;
|
|
case 3: // x0 Minutes
|
|
mh = (TimerDown.MaxMins / 10);
|
|
ml = TimerDown.MaxMins - (mh * 10);
|
|
ml = roller(ml - 1, 0, 9);
|
|
TimerDown.MaxMins = (mh * 10) + ml;
|
|
StopCD();
|
|
Options.NeedsSaving = true;
|
|
DoHaptic = true;
|
|
UpdateDisp = true; // Quick Update.
|
|
SetTurbo();
|
|
break;
|
|
case 4: //Repeats
|
|
TimerDown.MaxTones = roller(TimerDown.MaxTones + 1, (WatchTime.DeadRTC ? 4 : 0), 4);
|
|
StopCD();
|
|
Options.NeedsSaving = true;
|
|
DoHaptic = true;
|
|
UpdateDisp = true; // Quick Update.
|
|
SetTurbo();
|
|
}
|
|
}else if (Menu.Item == MENU_DARK && Menu.SubItem > 0){ // Sleep Mode.
|
|
switch (Menu.SubItem){
|
|
case 1: // Style.
|
|
Options.SleepStyle = roller(Options.SleepStyle - 1, (WatchTime.DeadRTC ? 1 : 0), 2);
|
|
Options.NeedsSaving = true;
|
|
break;
|
|
case 2: // SleepMode (0=off, 10 seconds)
|
|
Options.SleepMode = roller(Options.SleepMode - 1, 1, 10);
|
|
Options.NeedsSaving = true;
|
|
break;
|
|
case 3: // SleepStart (hour)
|
|
if (Options.SleepStart - 1 != Options.SleepEnd) { Options.SleepStart = roller(Options.SleepStart - 1, 0,23); Options.NeedsSaving = true; } else return;
|
|
break;
|
|
case 4: // SleepStart (hour)
|
|
if (Options.SleepEnd - 1 != Options.SleepStart) { Options.SleepEnd = roller(Options.SleepEnd - 1, 0,23); Options.NeedsSaving = true; } else return;
|
|
break;
|
|
}
|
|
DoHaptic = true;
|
|
UpdateDisp = true; // Quick Update.
|
|
SetTurbo();
|
|
}else if (Menu.Item == MENU_SYNC && Menu.SubItem > 0){
|
|
Menu.SubItem = roller(Menu.SubItem + 1, 1, 3);
|
|
Options.NeedsSaving = true;
|
|
DoHaptic = true;
|
|
UpdateDisp = true; // Quick Update.
|
|
SetTurbo();
|
|
}else if (Menu.Item == MENU_WIFI && Menu.SubItem > 0){
|
|
// Do nothing!
|
|
}else if (Menu.Item == MENU_TOFF && Menu.SubItem > 0){
|
|
// Do nothing!
|
|
}else{
|
|
if (Menu.Style == MENU_INOPTIONS){
|
|
Menu.Item = roller(Menu.Item + 1, MENU_DISP, (NTPData.State > 0 || WatchyAPOn || OTAUpdate || getBatteryVoltage() < MinBattery) ? MENU_TRBL : MENU_OTAM);
|
|
}else if (Menu.Style == MENU_INALARMS){
|
|
Menu.Item = roller(Menu.Item + 1, MENU_ALARM1, MENU_TONES);
|
|
}else if (Menu.Style == MENU_INTIMERS){
|
|
Menu.Item = roller(Menu.Item + 1, MENU_TIMEDN, MENU_TIMEUP);
|
|
}else if (Menu.Style == MENU_INTROUBLE){
|
|
Menu.Item = roller(Menu.Item + 1, MENU_SCRN, MENU_TOFF);
|
|
}else{
|
|
Menu.Item = roller(Menu.Item + 1, MENU_STEPS, MENU_OPTIONS);
|
|
}
|
|
Menu.SubItem=0;
|
|
Menu.SubSubItem=0;
|
|
DoHaptic = true;
|
|
UpdateDisp = true; // Quick Update.
|
|
SetTurbo();
|
|
}
|
|
}
|
|
}
|
|
}
|
|
|
|
void WatchyGSR::UpdateUTC(){
|
|
tmElements_t TM; // struct tm * tm;
|
|
if (!WatchTime.DeadRTC){
|
|
RTC.read(TM);
|
|
WatchTime.UTC_RAW = makeTime(TM) + (NTPData.TimeTest ? 0 : WatchTime.Drifting);
|
|
}
|
|
breakTime(WatchTime.UTC_RAW,WatchTime.UTC);
|
|
}
|
|
|
|
void WatchyGSR::UpdateClock(){
|
|
struct tm * tm;
|
|
setenv("TZ",WatchTime.POSIX,1);
|
|
tzset();
|
|
tm = localtime(&WatchTime.UTC_RAW);
|
|
WatchTime.Local.Second = tm->tm_sec;
|
|
WatchTime.Local.Minute = tm->tm_min;
|
|
WatchTime.Local.Hour = tm->tm_hour;
|
|
WatchTime.Local.Wday = tm->tm_wday;
|
|
WatchTime.Local.Day = tm->tm_mday;
|
|
WatchTime.Local.Month = tm->tm_mon + 1;
|
|
WatchTime.Local.Year = tm->tm_year;
|
|
}
|
|
|
|
// Manage time will determine if the RTC is in use, will also set a flag to "New Minute" for the loop functions to see the minute change.
|
|
void WatchyGSR::ManageTime(){
|
|
tmElements_t TM; // struct tm * tm;
|
|
int I;
|
|
bool B;
|
|
|
|
if (WatchTime.DeadRTC) B = (WatchTime.WatchyRTC < esp_timer_get_time()); else B = (WatchTime.EPSMS < millis());
|
|
if (B){
|
|
// Deal with NTPData.TimeTest.
|
|
if (NTPData.TimeTest){
|
|
NTPData.TestCount++;
|
|
UpdateUTC();
|
|
if (NTPData.TestCount == 1) WatchTime.TravelTest = WatchTime.UTC_RAW + 60; // Add the minute.
|
|
if (NTPData.TestCount > 1){
|
|
I = Options.Drift;
|
|
if (NTPData.NTPDone){
|
|
if (WatchTime.TravelTest > WatchTime.UTC_RAW) Options.Drift = 0 - (WatchTime.TravelTest - WatchTime.UTC_RAW);
|
|
else if (WatchTime.UTC_RAW > WatchTime.TravelTest) Options.Drift = WatchTime.UTC_RAW - WatchTime.TravelTest;
|
|
else if (WatchTime.UTC_RAW == WatchTime.TravelTest) Options.Drift = 0;
|
|
if (Options.Drift < -29 || Options.Drift > 29){
|
|
WatchTime.DeadRTC = true; Options.NeedsSaving = true; Options.UsingDrift = false; Options.Feedback = false; Options.MasterRepeats = 4; Alarms_Repeats[0] = 4; Alarms_Repeats[1] = 4; Alarms_Repeats[2] = 4; Alarms_Repeats[3] = 4; TimerDown.MaxTones = 4;
|
|
if (Options.SleepStyle == 0) Options.SleepStyle = 1;
|
|
}else Options.UsingDrift = (Options.Drift != 0);
|
|
if (Menu.Item == MENU_TOFF) Menu.SubItem = 3;
|
|
NTPData.TimeTest = false;
|
|
if (Options.UsingDrift) WatchTime.Drifting = Options.Drift;
|
|
}else{
|
|
NTPData.TimeTest = false;
|
|
if (Menu.Item == MENU_TOFF) Menu.SubItem = 0;
|
|
}
|
|
Options.NeedsSaving |= (I != Options.Drift);
|
|
UpdateClock();
|
|
}
|
|
}
|
|
if (WatchTime.DeadRTC) WatchTime.WatchyRTC += 60000000; else WatchTime.EPSMS += 60000;
|
|
WatchTime.NewMinute=true;
|
|
}
|
|
if (WatchTime.NewMinute && !NTPData.TimeTest && !IDidIt){
|
|
if (WatchTime.DeadRTC){
|
|
WatchTime.UTC_RAW += 60;
|
|
IDidIt = true;
|
|
UpdateDisp=Showing();
|
|
UpdateUTC();
|
|
UpdateClock();
|
|
}else{
|
|
WatchTime.EPSMS += ((Options.UsingDrift ? Options.Drift : 0) * 1000);
|
|
if (Options.UsingDrift){
|
|
WatchTime.Drifting += Options.Drift;
|
|
IDidIt = true;
|
|
UpdateDisp=Showing();
|
|
UpdateUTC();
|
|
UpdateClock();
|
|
}
|
|
}
|
|
}
|
|
}
|
|
|
|
void WatchyGSR::_rtcConfig() {
|
|
tmElements_t TM;
|
|
RTC.squareWave(SQWAVE_NONE); //disable square wave output
|
|
RTC.setAlarm(ALM2_EVERY_MINUTE, 0, 0, 0, 0); //alarm wakes up Watchy every minute
|
|
RTC.alarmInterrupt(ALARM_2, true); //enable alarm interrupt
|
|
RTC.read(TM);
|
|
}
|
|
|
|
void WatchyGSR::_bmaConfig() {
|
|
|
|
if (sensor.begin(_readRegister, _writeRegister, delay) == false) {
|
|
//fail to init BMA
|
|
return;
|
|
}
|
|
|
|
// Accel parameter structure
|
|
Acfg cfg;
|
|
/*!
|
|
Output data rate in Hz, Optional parameters:
|
|
- BMA4_OUTPUT_DATA_RATE_0_78HZ
|
|
- BMA4_OUTPUT_DATA_RATE_1_56HZ
|
|
- BMA4_OUTPUT_DATA_RATE_3_12HZ
|
|
- BMA4_OUTPUT_DATA_RATE_6_25HZ
|
|
- BMA4_OUTPUT_DATA_RATE_12_5HZ
|
|
- BMA4_OUTPUT_DATA_RATE_25HZ
|
|
- BMA4_OUTPUT_DATA_RATE_50HZ
|
|
- BMA4_OUTPUT_DATA_RATE_100HZ
|
|
- BMA4_OUTPUT_DATA_RATE_200HZ
|
|
- BMA4_OUTPUT_DATA_RATE_400HZ
|
|
- BMA4_OUTPUT_DATA_RATE_800HZ
|
|
- BMA4_OUTPUT_DATA_RATE_1600HZ
|
|
*/
|
|
cfg.odr = BMA4_OUTPUT_DATA_RATE_100HZ;
|
|
/*!
|
|
G-range, Optional parameters:
|
|
- BMA4_ACCEL_RANGE_2G
|
|
- BMA4_ACCEL_RANGE_4G
|
|
- BMA4_ACCEL_RANGE_8G
|
|
- BMA4_ACCEL_RANGE_16G
|
|
*/
|
|
cfg.range = BMA4_ACCEL_RANGE_2G;
|
|
/*!
|
|
Bandwidth parameter, determines filter configuration, Optional parameters:
|
|
- BMA4_ACCEL_OSR4_AVG1
|
|
- BMA4_ACCEL_OSR2_AVG2
|
|
- BMA4_ACCEL_NORMAL_AVG4
|
|
- BMA4_ACCEL_CIC_AVG8
|
|
- BMA4_ACCEL_RES_AVG16
|
|
- BMA4_ACCEL_RES_AVG32
|
|
- BMA4_ACCEL_RES_AVG64
|
|
- BMA4_ACCEL_RES_AVG128
|
|
*/
|
|
cfg.bandwidth = BMA4_ACCEL_NORMAL_AVG4;
|
|
|
|
/*! Filter performance mode , Optional parameters:
|
|
- BMA4_CIC_AVG_MODE
|
|
- BMA4_CONTINUOUS_MODE
|
|
*/
|
|
cfg.perf_mode = BMA4_CONTINUOUS_MODE;
|
|
|
|
// Configure the BMA423 accelerometer
|
|
sensor.setAccelConfig(cfg);
|
|
|
|
// Enable BMA423 accelerometer
|
|
// Warning : Need to use feature, you must first enable the accelerometer
|
|
sensor.enableAccel();
|
|
|
|
struct bma4_int_pin_config config ;
|
|
config.edge_ctrl = BMA4_LEVEL_TRIGGER;
|
|
config.lvl = BMA4_ACTIVE_HIGH;
|
|
config.od = BMA4_PUSH_PULL;
|
|
config.output_en = BMA4_OUTPUT_ENABLE;
|
|
config.input_en = BMA4_INPUT_DISABLE;
|
|
// The correct trigger interrupt needs to be configured as needed
|
|
sensor.setINTPinConfig(config, BMA4_INTR1_MAP);
|
|
|
|
struct bma423_axes_remap remap_data;
|
|
remap_data.x_axis = 1;
|
|
remap_data.x_axis_sign = 0xFF;
|
|
remap_data.y_axis = 0;
|
|
remap_data.y_axis_sign = 0xFF;
|
|
remap_data.z_axis = 2;
|
|
remap_data.z_axis_sign = 0xFF;
|
|
// Need to raise the wrist function, need to set the correct axis
|
|
sensor.setRemapAxes(&remap_data);
|
|
|
|
// Enable BMA423 isStepCounter feature
|
|
sensor.enableFeature(BMA423_STEP_CNTR, true);
|
|
// Enable BMA423 isTilt feature
|
|
//sensor.enableFeature(BMA423_TILT, true);
|
|
// Enable BMA423 isDoubleClick feature
|
|
// sensor.enableFeature(BMA423_WAKEUP, true);
|
|
|
|
// Reset steps
|
|
//sensor.resetStepCounter();
|
|
|
|
// Turn on feature interrupt
|
|
//sensor.enableStepCountInterrupt();
|
|
//sensor.enableTiltInterrupt();
|
|
// It corresponds to isDoubleClick interrupt
|
|
// sensor.enableWakeupInterrupt();
|
|
}
|
|
|
|
float WatchyGSR::getBatteryVoltage(){
|
|
float A, B, C, D;
|
|
A = analogRead(ADC_PIN) - 0.0125;
|
|
B = analogRead(ADC_PIN) - 0.0125;
|
|
C = analogRead(ADC_PIN) - 0.0125;
|
|
D = analogRead(ADC_PIN) - 0.0125;
|
|
return (((A + B + C + D) / 16384.0) * 7.23);
|
|
}
|
|
|
|
uint16_t WatchyGSR::_readRegister(uint8_t address, uint8_t reg, uint8_t *data, uint16_t len) {
|
|
Wire.beginTransmission(address);
|
|
Wire.write(reg);
|
|
Wire.endTransmission();
|
|
Wire.requestFrom((uint8_t)address, (uint8_t)len);
|
|
uint8_t i = 0;
|
|
while (Wire.available()) {
|
|
data[i++] = Wire.read();
|
|
}
|
|
return 0;
|
|
}
|
|
|
|
uint16_t WatchyGSR::_writeRegister(uint8_t address, uint8_t reg, uint8_t *data, uint16_t len) {
|
|
Wire.beginTransmission(address);
|
|
Wire.write(reg);
|
|
Wire.write(data, len);
|
|
return (0 != Wire.endTransmission());
|
|
}
|
|
|
|
String WatchyGSR::MakeTime(int Hour, int Minutes, bool& Alarm) { // Use variable with Alarm, if set to False on the way in, returns PM indication.
|
|
int H;
|
|
String AP = "";
|
|
H = Hour;
|
|
if (!Options.TwentyFour){
|
|
if (H > 11){
|
|
AP = " PM";
|
|
if (!Alarm){
|
|
Alarm = true; // Tell the clock to use the PM indicator.
|
|
}
|
|
}else{
|
|
AP = " AM";
|
|
}
|
|
if (H > 12){
|
|
H -= 12;
|
|
}else if (H == 0){
|
|
H = 12;
|
|
}
|
|
}
|
|
return String(H) + (Minutes < 10 ? ":0" : ":") + String(Minutes) + AP;
|
|
}
|
|
|
|
String WatchyGSR::MakeHour(uint8_t Hour){
|
|
int H;
|
|
H = Hour;
|
|
if (!Options.TwentyFour){
|
|
if (H > 12){
|
|
H -= 12;
|
|
}
|
|
if (H == 0){
|
|
H = 12;
|
|
}
|
|
}
|
|
return String(H);
|
|
}
|
|
|
|
String WatchyGSR::MakeSeconds(uint8_t Seconds){ return (Seconds > 1 ? "seconds." : "second."); }
|
|
|
|
String WatchyGSR::MakeTOD(uint8_t Hour, bool AddZeros){
|
|
if(Options.TwentyFour){
|
|
if (AddZeros) return ":00";
|
|
return "";
|
|
}
|
|
return (Hour > 11 ? " PM" : " AM");
|
|
}
|
|
|
|
String WatchyGSR::MakeMinutes(uint8_t Minutes){
|
|
return (Minutes < 10 ? "0" : "") + String(Minutes);
|
|
}
|
|
|
|
String WatchyGSR::MakeSteps(uint32_t uSteps){
|
|
String S, T, X;
|
|
int I, C;
|
|
|
|
S = String(uSteps);
|
|
I = S.length();
|
|
C = 0; T = "";
|
|
|
|
while (I > 0){
|
|
X = (I > 1 && C == 2) ? "," : "";
|
|
T = X + S.charAt(I - 1) + T;
|
|
C = roller(C + 1, 0, 2); I--;
|
|
}
|
|
return T;
|
|
}
|
|
|
|
void WatchyGSR::CheckAlarm(int I){
|
|
uint16_t B;
|
|
bool bA;
|
|
B = (ALARM_ACTIVE | Bits[WatchTime.Local.Wday]);
|
|
bA = (Alarms_Hour[I] == WatchTime.Local.Hour && Alarms_Minutes[I] == WatchTime.Local.Minute);
|
|
if (!bA && Alarms_Times[I] == 0 && (Alarms_Active[I] & ALARM_TRIGGERED) != 0){
|
|
Alarms_Active[I] &= ALARM_NOTRIGGER;
|
|
}else if ((Alarms_Active[I] & B) == B){ // Active and Active Day.
|
|
if (bA && Alarms_Times[I] == 0 && (Alarms_Active[I] & ALARM_TRIGGERED) == 0){
|
|
Alarms_Times[I] = 255;
|
|
Alarms_Playing[I] = 30;
|
|
Darkness.Last=millis();
|
|
UpdateDisp=true; // Force it on, if it is in Dark Running.
|
|
Alarms_Active[I] |= ALARM_TRIGGERED;
|
|
if ((Alarms_Active[I] & ALARM_REPEAT) == 0){
|
|
Alarms_Active[I] &= (ALARM_ALL - Bits[WatchTime.Local.Wday]);
|
|
if ((Alarms_Active[I] & ALARM_DAYS) == 0){
|
|
Alarms_Active[I] ^= ALARM_ACTIVE; // Turn it off, not repeating.
|
|
}
|
|
}
|
|
}
|
|
}
|
|
}
|
|
|
|
void WatchyGSR::CheckCD(){
|
|
uint16_t M = ((WatchTime.UTC_RAW - TimerDown.LastUTC) / 60);
|
|
uint16_t E;
|
|
|
|
if ( M > 0){
|
|
TimerDown.LastUTC = WatchTime.UTC_RAW;
|
|
E = TimerDown.Mins + (TimerDown.Hours * 60) - M;
|
|
TimerDown.Hours = (E / 60);
|
|
TimerDown.Mins = E - (TimerDown.Hours * 60);
|
|
}
|
|
if (TimerDown.Hours == 0 && TimerDown.Mins == 0 && TimerDown.Active){
|
|
TimerDown.Tone = 24;
|
|
TimerDown.ToneLeft = 255;
|
|
TimerDown.Active = false;
|
|
Darkness.Last=millis();
|
|
UpdateDisp = true; // Quick Update.
|
|
}
|
|
}
|
|
|
|
// Counts the active (255) alarms/timers and after 3, sets them to lower values.
|
|
void WatchyGSR::CalculateTones(){
|
|
uint8_t Count = 0;
|
|
CheckAlarm(0); CheckAlarm(1); CheckAlarm(2); CheckAlarm(3); CheckCD();
|
|
if (Alarms_Times[0] > 0) Count++;
|
|
if (Alarms_Times[1] > 0) Count++;
|
|
if (Alarms_Times[2] > 0) Count++;
|
|
if (Alarms_Times[3] > 0) Count++;
|
|
if (TimerDown.ToneLeft > 0) Count++;
|
|
if (Count == 5){
|
|
if (Alarms_Times[0] == 255) Alarms_Times[0] = 7 * Reduce[Alarms_Repeats[0]];
|
|
if (Alarms_Times[1] == 255) Alarms_Times[1] = 7 * Reduce[Alarms_Repeats[1]];
|
|
if (Alarms_Times[2] == 255) Alarms_Times[2] = 7 * Reduce[Alarms_Repeats[2]];
|
|
if (Alarms_Times[3] == 255) Alarms_Times[3] = 7 * Reduce[Alarms_Repeats[3]];
|
|
if (TimerDown.ToneLeft == 255) TimerDown.ToneLeft = 10 * Reduce[TimerDown.MaxTones];
|
|
}else if (Count == 4){
|
|
if (Alarms_Times[0] == 255) Alarms_Times[0] = 8 * Reduce[Alarms_Repeats[0]];
|
|
if (Alarms_Times[1] == 255) Alarms_Times[1] = 8 * Reduce[Alarms_Repeats[1]];
|
|
if (Alarms_Times[2] == 255) Alarms_Times[2] = 8 * Reduce[Alarms_Repeats[2]];
|
|
if (Alarms_Times[3] == 255) Alarms_Times[3] = 8 * Reduce[Alarms_Repeats[3]];
|
|
if (TimerDown.ToneLeft == 255) TimerDown.ToneLeft = 12 * Reduce[TimerDown.MaxTones];
|
|
}else{
|
|
if (Alarms_Times[0] == 255) Alarms_Times[0] = 10 * Reduce[Alarms_Repeats[0]];
|
|
if (Alarms_Times[1] == 255) Alarms_Times[1] = 10 * Reduce[Alarms_Repeats[1]];
|
|
if (Alarms_Times[2] == 255) Alarms_Times[2] = 10 * Reduce[Alarms_Repeats[2]];
|
|
if (Alarms_Times[3] == 255) Alarms_Times[3] = 10 * Reduce[Alarms_Repeats[3]];
|
|
if (TimerDown.ToneLeft == 255) TimerDown.ToneLeft = 15 * Reduce[TimerDown.MaxTones];
|
|
}
|
|
}
|
|
|
|
void WatchyGSR::StopCD(){
|
|
if (TimerDown.ToneLeft > 0){
|
|
TimerDown.ToneLeft = 1;
|
|
TimerDown.Tone = 1;
|
|
}
|
|
}
|
|
|
|
uint8_t WatchyGSR::getToneTimes(uint8_t ToneIndex){
|
|
if (ToneIndex > 3) return TimerDown.ToneLeft;
|
|
return Alarms_Times[ToneIndex];
|
|
}
|
|
|
|
String WatchyGSR::getReduce(uint8_t Amount){
|
|
switch (Amount){
|
|
case 0:
|
|
return "Full";
|
|
case 1:
|
|
return "80%";
|
|
case 2:
|
|
return "60%";
|
|
case 3:
|
|
return "40%";
|
|
}
|
|
return "20%";
|
|
}
|
|
|
|
// Catches Steps and moves "Yesterday" into the other setting.
|
|
void WatchyGSR::monitorSteps(){
|
|
if (Steps.Hour == WatchTime.Local.Hour && Steps.Minutes == WatchTime.Local.Minute){
|
|
if (!Steps.Reset){
|
|
Steps.Yesterday=sensor.getCounter();
|
|
sensor.resetStepCounter();
|
|
Steps.Reset=true;
|
|
}
|
|
}else if (Steps.Reset) Steps.Reset=false;
|
|
}
|
|
|
|
IRAM_ATTR void WatchyGSR::handleInterrupt(){
|
|
uint8_t B = getButtonPins();
|
|
if (B > 0 && (LastButton == 0 || (millis() - LastButton) > KEYPAUSE)) Button = B;
|
|
}
|
|
|
|
IRAM_ATTR uint8_t WatchyGSR::getButtonPins(){
|
|
bool SW1 = (digitalRead(MENU_BTN_PIN) == 1);
|
|
bool SW2 = (digitalRead(BACK_BTN_PIN) == 1);
|
|
bool SW3 = (digitalRead(UP_BTN_PIN) == 1);
|
|
bool SW4 = (digitalRead(DOWN_BTN_PIN) == 1);
|
|
|
|
if (SW1) return Options.Lefty ? 4 : getSwapped(1);
|
|
else if (SW2) return Options.Lefty ? 3 : getSwapped(2);
|
|
else if (SW3) return Options.Lefty ? getSwapped(2) : 3;
|
|
else if (SW4) return Options.Lefty ? getSwapped(1) : 4;
|
|
return 0;
|
|
}
|
|
|
|
uint8_t WatchyGSR::getButtonMaskToID(uint64_t HW){
|
|
if (HW & MENU_BTN_MASK) return Options.Lefty ? 4 : getSwapped(1); // Menu Button [SW1]
|
|
else if (HW & BACK_BTN_MASK) return Options.Lefty ? 3 : getSwapped(2); // Back Button [SW2]
|
|
else if (HW & UP_BTN_MASK) return Options.Lefty ? getSwapped(2) : 3; // Up Button [SW3]
|
|
else if (HW & DOWN_BTN_MASK) return Options.Lefty ? getSwapped(1) : 4; // Down Button [SW4]
|
|
return 0;
|
|
}
|
|
|
|
IRAM_ATTR uint8_t WatchyGSR::getSwapped(uint8_t pIn){
|
|
switch (pIn){
|
|
case 1:
|
|
return Options.Swapped ? 2 : 1;
|
|
case 2:
|
|
return Options.Swapped ? 1 : 2;
|
|
}
|
|
return 0;
|
|
}
|
|
|
|
void WatchyGSR::AskForWiFi(){ if (!GSRWiFi.Requested && !GSRWiFi.Working) GSRWiFi.Requested = true; }
|
|
void WatchyGSR::endWiFi(){
|
|
if (GSRWiFi.Requests - 1 <= 0){
|
|
GSRWiFi.Requests = 0;
|
|
GSRWiFi.Requested = false;
|
|
GSRWiFi.Working = false;
|
|
GSRWiFi.Results = false;
|
|
GSRWiFi.Index = 0;
|
|
setStatus("");
|
|
WiFi.disconnect();
|
|
WiFi.mode(WIFI_OFF);
|
|
}else if (GSRWiFi.Requests > 0) GSRWiFi.Requests--;
|
|
}
|
|
|
|
void WatchyGSR::processWiFiRequest(){
|
|
wl_status_t WiFiE = WL_CONNECT_FAILED;
|
|
wl_status_t rWiFi = WiFi.status();
|
|
String AP, PA, O;
|
|
|
|
if (GSRWiFi.Requested){
|
|
GSRWiFi.Requested = false;
|
|
if (GSRWiFi.Requests == 0){
|
|
RefreshCPU(CPUMAX);
|
|
OTATimer = millis();
|
|
OTAFail = OTATimer;
|
|
WiFi.onEvent(WatchyGSR::WiFiStationDisconnected, SYSTEM_EVENT_STA_DISCONNECTED);
|
|
WiFi.disconnect();
|
|
WiFi.setHostname(WiFi_AP_SSID);
|
|
WiFi.mode(WIFI_STA);
|
|
GSRWiFi.Index = 0;
|
|
GSRWiFi.Tried = false;
|
|
GSRWiFi.Last = 0;
|
|
}
|
|
GSRWiFi.Working = true;
|
|
GSRWiFi.Requests++;
|
|
}
|
|
|
|
if (GSRWiFi.Working) {
|
|
if (getButtonPins() != 2) OTATimer = millis(); // Not pressing "BACK".
|
|
if (millis() - OTATimer > 10000 || millis() - OTAFail > 600000) OTAEnd = true; // Fail if holding back for 10 seconds OR 600 seconds has passed.
|
|
if (rWiFi == WL_CONNECTED) { GSRWiFi.Working = false; GSRWiFi.Results = true; return; } // We got connected.
|
|
if (millis() > GSRWiFi.Last){
|
|
if (GSRWiFi.Tried){
|
|
WiFi.disconnect();
|
|
GSRWiFi.Index++;
|
|
GSRWiFi.Tried = false;
|
|
}
|
|
if (GSRWiFi.Index < 11){
|
|
if (GSRWiFi.Index == 0){
|
|
setStatus(WiFiIndicator(24));
|
|
GSRWiFi.Tried = true;
|
|
if (WiFi_DEF_SSID > "") WiFiE = WiFi.begin(WiFi_DEF_SSID,WiFi_DEF_PASS); else WiFiE = WiFi.begin();
|
|
GSRWiFi.Last = millis() + 9000;
|
|
//if (WiFiE == WL_CONNECT_FAILED || WiFiE == WL_NO_SSID_AVAIL) { GSRWiFi.Last = millis() + 53000; GSRWiFi.Index++; } // Try the next one instantly.
|
|
}
|
|
if (GSRWiFi.Index > 0){
|
|
AP = APIDtoString(GSRWiFi.Index - 1); PA = PASStoString(GSRWiFi.Index - 1);
|
|
if (AP.length() > 0){
|
|
O = WiFiIndicator(GSRWiFi.Index);
|
|
setStatus(O);
|
|
GSRWiFi.Tried = true;
|
|
WiFiE = WiFi.begin(AP.c_str(),PA.c_str());
|
|
GSRWiFi.Last = millis() + 9000;
|
|
}else GSRWiFi.Index++;
|
|
//if (WiFiE == WL_CONNECT_FAILED || WiFiE == WL_NO_SSID_AVAIL || AP == "") { GSRWiFi.Last = millis() + 53000; GSRWiFi.Index++; } // Try the next one instantly.
|
|
}
|
|
}else endWiFi();
|
|
}
|
|
}
|
|
}
|
|
|
|
String WatchyGSR::WiFiIndicator(uint8_t Index){
|
|
unsigned char O[7];
|
|
String S;
|
|
|
|
O[0] = 87;
|
|
O[1] = 105;
|
|
O[2] = 70;
|
|
O[3] = 105;
|
|
O[4] = 45;
|
|
O[5] = (64 + Index);
|
|
O[6] = 0;
|
|
|
|
S = reinterpret_cast<const char *>(O);
|
|
return S;
|
|
}
|
|
|
|
wl_status_t WatchyGSR::currentWiFi(){
|
|
if (WiFi.status() == WL_CONNECTED) return WL_CONNECTED;
|
|
if (GSRWiFi.Working) return WL_IDLE_STATUS; // Make like it is relaxing doing nothing.
|
|
return WL_CONNECT_FAILED;
|
|
}
|
|
|
|
void WatchyGSR::WiFiStationDisconnected(WiFiEvent_t event, WiFiEventInfo_t info){
|
|
GSRWiFi.Last = millis() + 1000;
|
|
}
|
|
|
|
String WatchyGSR::buildWiFiAPPage(){
|
|
String S = wifiIndexA;
|
|
String T;
|
|
int I = 0;
|
|
|
|
while (I < 10){
|
|
T = wifiIndexB;
|
|
T.replace("$",String(char(65 + I)));
|
|
T.replace("#",String(char(48 + I)));
|
|
T.replace("?",APIDtoString(I));
|
|
S += T;
|
|
|
|
T = wifiIndexC;
|
|
T.replace("#",String(char(48 + I)));
|
|
T.replace("$",PASStoString(I));
|
|
S += (T + (I < 9 ? "</tr>" : ""));
|
|
I++;
|
|
}
|
|
return S + wifiIndexD;
|
|
}
|
|
|
|
void WatchyGSR::parseWiFiPageArg(String ARG, String DATA){
|
|
uint8_t I = String(ARG.charAt(2)).toInt();
|
|
String S = ARG.substring(0,2);
|
|
|
|
if (S == "AP") strcpy(GSRWiFi.AP[I].APID, DATA.c_str());
|
|
if (S == "PA") strcpy(GSRWiFi.AP[I].PASS, DATA.c_str());
|
|
}
|
|
|
|
String WatchyGSR::APIDtoString(uint8_t Index){
|
|
String S = "";
|
|
uint8_t I = 0;
|
|
while (GSRWiFi.AP[Index].APID[I] != 0 && I < 32) { S += char(GSRWiFi.AP[Index].APID[I]); I++; }
|
|
return S;
|
|
}
|
|
|
|
String WatchyGSR::PASStoString(uint8_t Index){
|
|
String S = "";
|
|
uint8_t I = 0;
|
|
while (GSRWiFi.AP[Index].PASS[I] != 0 && I < 63) { S += char(GSRWiFi.AP[Index].PASS[I]); I++; }
|
|
return S;
|
|
}
|
|
|
|
void WatchyGSR::initZeros(){
|
|
String S = "";
|
|
uint8_t I;
|
|
GuiMode = WATCHON;
|
|
ScreenOn = true;
|
|
VibeMode = 0;
|
|
WatchyStatus = "";
|
|
WatchTime.TimeZone = "";
|
|
WatchTime.Drifting = 0;
|
|
for (I = 0; I < 64; I++) WatchTime.POSIX[I] = 0;
|
|
Menu.Style = MENU_INNORMAL;
|
|
Menu.Item = 0;
|
|
Menu.SubItem = 0;
|
|
Menu.SubSubItem = 0;
|
|
NTPData.Pause = 0;
|
|
NTPData.Wait = 0;
|
|
NTPData.NTPDone = false;
|
|
Battery.Last = getBatteryVoltage() + 1; // Done for power spike after reboot from making the watch think it's charging.
|
|
Battery.UpCount = 0;
|
|
Battery.DownCount = 0;
|
|
ActiveMode = false;
|
|
OTATry = 0;
|
|
OTAEnd = false;
|
|
OTAUpdate = false;
|
|
OTATimer = millis();
|
|
WatchyAPOn = false;
|
|
DoHaptic = false;
|
|
Steps.Reset=false;
|
|
Alarms_Active[0]=0;
|
|
Alarms_Active[1]=0;
|
|
Alarms_Active[2]=0;
|
|
Alarms_Active[3]=0;
|
|
Alarms_Times[0]=0;
|
|
Alarms_Times[1]=0;
|
|
Alarms_Times[2]=0;
|
|
Alarms_Times[3]=0;
|
|
Alarms_Playing[0]=0;
|
|
Alarms_Playing[1]=0;
|
|
Alarms_Playing[2]=0;
|
|
Alarms_Playing[3]=0;
|
|
Alarms_Repeats[0]=0;
|
|
Alarms_Repeats[1]=0;
|
|
Alarms_Repeats[2]=0;
|
|
Alarms_Repeats[3]=0;
|
|
GSRWiFi.Requested=false;
|
|
GSRWiFi.Working=false;
|
|
GSRWiFi.Results=false;
|
|
GSRWiFi.Index=0;
|
|
Updates.Full=true;
|
|
Updates.Drawn=true;
|
|
strcpy(GSRWiFi.AP[0].APID,S.c_str());
|
|
strcpy(GSRWiFi.AP[0].PASS,S.c_str());
|
|
strcpy(GSRWiFi.AP[1].APID,S.c_str());
|
|
strcpy(GSRWiFi.AP[1].PASS,S.c_str());
|
|
strcpy(GSRWiFi.AP[2].APID,S.c_str());
|
|
strcpy(GSRWiFi.AP[2].PASS,S.c_str());
|
|
strcpy(GSRWiFi.AP[3].APID,S.c_str());
|
|
strcpy(GSRWiFi.AP[3].PASS,S.c_str());
|
|
strcpy(GSRWiFi.AP[4].APID,S.c_str());
|
|
strcpy(GSRWiFi.AP[4].PASS,S.c_str());
|
|
strcpy(GSRWiFi.AP[5].APID,S.c_str());
|
|
strcpy(GSRWiFi.AP[5].PASS,S.c_str());
|
|
strcpy(GSRWiFi.AP[6].APID,S.c_str());
|
|
strcpy(GSRWiFi.AP[6].PASS,S.c_str());
|
|
strcpy(GSRWiFi.AP[7].APID,S.c_str());
|
|
strcpy(GSRWiFi.AP[7].PASS,S.c_str());
|
|
strcpy(GSRWiFi.AP[8].APID,S.c_str());
|
|
strcpy(GSRWiFi.AP[8].PASS,S.c_str());
|
|
strcpy(GSRWiFi.AP[9].APID,S.c_str());
|
|
strcpy(GSRWiFi.AP[9].PASS,S.c_str());
|
|
NTPData.TimeZone=false;
|
|
NTPData.UpdateUTC=true;
|
|
NTPData.State=1;
|
|
TimerUp.SetAt = WatchTime.UTC_RAW;
|
|
TimerUp.StopAt = TimerUp.SetAt;
|
|
TimerDown.MaxMins = 0;
|
|
TimerDown.MaxHours = 0;
|
|
TimerDown.Mins = 0;
|
|
TimerDown.Hours = 0;
|
|
TimerDown.MaxTones = 0;
|
|
TimerDown.Active = false;
|
|
AskForWiFi();
|
|
}
|
|
|
|
// Settings Storage & Retrieval here.
|
|
|
|
String WatchyGSR::GetSettings(){
|
|
unsigned char I[2048];
|
|
unsigned char O[2048];
|
|
int K = 0;
|
|
int J = 0;
|
|
uint8_t X, Y, W;
|
|
uint16_t V;
|
|
String S;
|
|
size_t L;
|
|
|
|
// Retrieve the settings from the current state into a base64 string.
|
|
|
|
I[J] = 129; J++; // New Version.
|
|
I[J] = (Steps.Hour); J++;
|
|
I[J] = (Steps.Minutes); J++;
|
|
K = Options.TwentyFour ? 1 : 0;
|
|
K |= Options.LightMode ? 2 : 0;
|
|
K |= Options.Feedback ? 4 : 0;
|
|
K |= Options.Border ? 8 : 0;
|
|
K |= Options.Lefty ? 16 : 0;
|
|
K |= Options.Swapped ? 32 : 0;
|
|
K |= Options.Orientated ? 64 : 0;
|
|
K |= Options.UsingDrift ? 128 : 0;
|
|
I[J] = (K); J++;
|
|
// Versuib 128.
|
|
I[J] = (Options.Drift & 255); J++;
|
|
I[J] = ((Options.Drift >> 8) & 255); J++;
|
|
W = ((Options.Performance & 15) << 4);
|
|
I[J] = (Options.SleepStyle | W); J++;
|
|
I[J] = (Options.SleepMode); J++;
|
|
I[J] = (Options.SleepStart); J++;
|
|
I[J] = (Options.SleepEnd); J++;
|
|
// End Version 129.
|
|
|
|
V = (Options.MasterRepeats << 5); I[J] = (Options.Turbo | V); J++;
|
|
|
|
V = (TimerDown.MaxTones << 5);
|
|
I[J] = ((TimerDown.MaxHours) | V); J++;
|
|
I[J] = (TimerDown.MaxMins); J++;
|
|
|
|
for (K = 0; K < 4; K++){
|
|
V = (Alarms_Repeats[K] << 5);
|
|
I[J] = (Alarms_Hour[K] | V); J++;
|
|
I[J] = (Alarms_Minutes[K]); J++;
|
|
V = (Alarms_Active[K] & ALARM_NOTRIGGER);
|
|
I[J] = (V & 255); J++;
|
|
I[J] = ((V >> 8) & 255); J++;
|
|
}
|
|
|
|
for (X = 0; X < 10; X++){
|
|
S = APIDtoString(X);
|
|
if (S > "") {
|
|
W = S.length();
|
|
I[J] = W; J++;
|
|
for (Y = 0; Y < W; Y++){
|
|
I[J] = S.charAt(Y); J++;
|
|
}
|
|
S = PASStoString(X);
|
|
W = S.length();
|
|
I[J] = W; J++;
|
|
for (Y = 0; Y < W; Y++){
|
|
I[J] = S.charAt(Y); J++;
|
|
}
|
|
}
|
|
}
|
|
I[J] = 0; J++;
|
|
|
|
mbedtls_base64_encode(&O[0], 2047, &L, &I[0], J);
|
|
|
|
O[L]=0;
|
|
S = reinterpret_cast<const char *>(O);
|
|
return S;
|
|
}
|
|
|
|
void WatchyGSR::StoreSettings(String FromUser){
|
|
unsigned char O[2048], E[2048];
|
|
int K = 0;
|
|
int J = 0;
|
|
uint16_t V;
|
|
size_t L;
|
|
bool Ok;
|
|
uint8_t I, A, W, NewV; // For WiFi storage.
|
|
String S;
|
|
|
|
J = FromUser.length(); if (J < 5) return;
|
|
for (K = 0; K < J; K++) E[K] = FromUser.charAt(K); NewV = 0;
|
|
|
|
mbedtls_base64_decode(&O[0], 2047, &L, &E[0], J); L--; // Take dead zero off end.
|
|
|
|
J = 0; if (L > J && O[J] > 128) {NewV = O[J]; J++; } // Detect NewVersion and go past.
|
|
if (L > J) Steps.Hour = clamp(O[J],0,23);
|
|
J++; if (L > J) Steps.Minutes = clamp(O[J],0,59);
|
|
J++;
|
|
if (L > J) {
|
|
V = O[J];
|
|
Options.TwentyFour = (V & 1) ? true : false;
|
|
Options.LightMode = (V & 2) ? true : false;
|
|
Options.Feedback = (V & 4) ? true : false;
|
|
Options.Border = (V & 8) ? true : false;
|
|
Options.Lefty = (V & 16) ? true : false;
|
|
Options.Swapped = (V & 32) ? true : false;
|
|
Options.Orientated = (V & 64) ? true : false;
|
|
Options.UsingDrift = (V & 128) ? true : false;
|
|
}
|
|
if (NewV > 128){
|
|
J++; if (L > J + 1){
|
|
Options.Drift = (((O[J + 1] & 255) << 8) | O[J]); J++;
|
|
if (Options.Drift < -29 || Options.Drift > 29){
|
|
Options.UsingDrift = false;
|
|
WatchTime.DeadRTC = true;
|
|
}else WatchTime.DeadRTC = false;
|
|
}
|
|
J++; if (L > J){
|
|
V = ((O[J] & 240) >> 4); Options.Performance = clamp(V,0,2);
|
|
Options.SleepStyle = clamp((O[J] & 3),(WatchTime.DeadRTC ? 1 : 0),2);
|
|
}
|
|
J++; if (L > J) Options.SleepMode = clamp(O[J],1,10);
|
|
J++; if (L > J) Options.SleepStart = clamp(O[J],0,23);
|
|
J++; if (L > J) Options.SleepEnd = clamp(O[J],0,23);
|
|
}
|
|
if (WatchTime.DeadRTC) Options.Feedback = false;
|
|
J++; if (L > J){
|
|
V = ((O[J] & 224) >> 5);
|
|
Options.MasterRepeats = clamp(V,(WatchTime.DeadRTC ? 4 : 0),4);
|
|
Options.Turbo = clamp((O[J] & 31),0,10);
|
|
}
|
|
J++; if (L > J){
|
|
V = ((O[J] & 224) >> 5);
|
|
TimerDown.MaxTones = clamp(V,(WatchTime.DeadRTC ? 4 : 0),4);
|
|
TimerDown.MaxHours = clamp((O[J] & 31),0,23);
|
|
}
|
|
J++; if (L > J) TimerDown.MaxMins = clamp(O[J],0,59);
|
|
|
|
for (K = 0; K < 4; K++){
|
|
J++; if (L > J){
|
|
V = ((O[J] & 224) >> 5);
|
|
Alarms_Repeats[K] = clamp(V,(WatchTime.DeadRTC ? 4 : 0),4);
|
|
Alarms_Hour[K] = clamp((O[J] & 31),0,23);
|
|
}
|
|
J++; if (L > J) Alarms_Minutes[K] = clamp(O[J],0,59);
|
|
J++; if (L > J + 1){
|
|
V = ((O[J + 1] & 255) << 8);
|
|
Alarms_Active[K] = ((O[J] | V) & ALARM_NOTRIGGER); J++;
|
|
}
|
|
}
|
|
|
|
S = ""; for (I = 0; I < 10; I++) { strcpy(GSRWiFi.AP[I].APID,S.c_str()); strcpy(GSRWiFi.AP[I].PASS,S.c_str()); }
|
|
|
|
J++; A = 0;
|
|
while (L > J){
|
|
Ok = false;
|
|
if (L > J){ // get APx
|
|
W = O[J]; J++; S = "";
|
|
if (L > J + (W - 1)) { // Read APx.
|
|
for (I = 0; L > J && I < W; I++){
|
|
S += String(char(O[J])); J++;
|
|
}
|
|
strcpy(GSRWiFi.AP[A].APID,S.c_str());
|
|
Ok = true;
|
|
}
|
|
if (L > J){ // get APx
|
|
W = O[J]; J++; S = "";
|
|
if (L > J + (W - 1)) { // Read PAx.
|
|
for (I = 0; L > J && I < W; I++){
|
|
S += String(char(O[J])); J++;
|
|
}
|
|
strcpy(GSRWiFi.AP[A].PASS,S.c_str());
|
|
Ok = true;
|
|
}
|
|
}
|
|
}
|
|
if (Ok) A++;
|
|
}
|
|
|
|
OTAFail = millis() - 598000;
|
|
}
|
|
// NVS code.
|
|
String WatchyGSR::RetrieveSettings(){
|
|
String S = NVS.getString("GSR-Options");
|
|
Options.NeedsSaving = false;
|
|
StoreSettings(S);
|
|
}
|
|
|
|
void WatchyGSR::RecordSettings(){
|
|
bool B = NVS.setString("GSR-Options",GetSettings());
|
|
Options.NeedsSaving = !B;
|
|
}
|
|
|
|
// Turbo Mode!
|
|
void WatchyGSR::SetTurbo(){
|
|
TurboTime=millis();
|
|
LastButton=TurboTime; // Here for speed.
|
|
Darkness.Last=LastButton; // Keeps track of SleepMode.
|
|
}
|
|
|
|
bool WatchyGSR::InTurbo() { return (!WatchTime.DeadRTC && Options.Turbo > 0 && TurboTime != 0 && millis() - TurboTime < (Options.Turbo * 1000)); }
|
|
|
|
bool WatchyGSR::DarkWait(){
|
|
bool B = (Darkness.Last != 0 && (millis() - Darkness.Last) < (Options.SleepMode * 1000));
|
|
if (Options.SleepStyle == 2){
|
|
if (B) return B;
|
|
if (Options.SleepEnd > Options.SleepStart) { if (WatchTime.Local.Hour >= Options.SleepStart && WatchTime.Local.Hour < Options.SleepEnd) return false; }
|
|
else if (WatchTime.Local.Hour >= Options.SleepStart || WatchTime.Local.Hour < Options.SleepEnd) return false;
|
|
}else if (Options.SleepStyle > 0) return B;
|
|
return false;
|
|
}
|
|
|
|
bool WatchyGSR::Showing() {
|
|
bool B = Updates.Full;
|
|
if (Options.SleepStyle > 0){
|
|
B |= (Darkness.Last > 0 && (millis() - Darkness.Last) < (Options.SleepMode * 1000));
|
|
if (Options.SleepStyle == 1){
|
|
if (WatchTime.DeadRTC) return B;
|
|
else return (B | (GuiMode != WATCHON)); // Hide because it isn't checking the rest.
|
|
}
|
|
if (Options.SleepStyle == 2){
|
|
if (B) return B;
|
|
if (Options.SleepEnd > Options.SleepStart) { if (WatchTime.Local.Hour >= Options.SleepStart && WatchTime.Local.Hour < Options.SleepEnd) return false; }
|
|
else if (WatchTime.Local.Hour >= Options.SleepStart || WatchTime.Local.Hour < Options.SleepEnd) return false;
|
|
}
|
|
}
|
|
return true;
|
|
}
|
|
|
|
void WatchyGSR::RefreshCPU(){ RefreshCPU(0); }
|
|
void WatchyGSR::RefreshCPU(int Value){
|
|
uint32_t C;
|
|
if (WatchTime.DeadRTC || Options.Performance == 2) C = 80;
|
|
else C = (InTurbo() || Value == CPUMID) ? 160 : 80;
|
|
if (Value == CPUMAX) CPUSet.Locked = true;
|
|
if (Value == CPUDEF) CPUSet.Locked = false;
|
|
if (WatchyAPOn || OTAUpdate || GSRWiFi.Requests > 0 || CPUSet.Locked || (Options.Performance == 0 && !WatchTime.DeadRTC)) C = 240;
|
|
if (C != CPUSet.Freq) if (setCpuFrequencyMhz(C)); CPUSet.Freq = C;
|
|
}
|
|
|
|
// Debugging here.
|
|
|
|
void WatchyGSR::DBug(String Value){
|
|
if (USEDEBUG){
|
|
if (!SerialSetup){
|
|
Serial.begin(115200);
|
|
SerialSetup=true;
|
|
}
|
|
Serial.println(Value);
|
|
}
|
|
}
|
|
|
|
String WatchyGSR::ToHex(uint64_t Value){
|
|
unsigned long long1 = (unsigned long)((Value & 0xFFFF0000) >> 16 );
|
|
unsigned long long2 = (unsigned long)((Value & 0x0000FFFF));
|
|
return String(long1, HEX) + String(long2, HEX);
|
|
}
|