From f1f7a64c36169f1efa0f950a8fce83414ad836e5 Mon Sep 17 00:00:00 2001 From: GuruSR <17853390+GuruSR@users.noreply.github.com> Date: Tue, 12 Apr 2022 15:41:49 -0400 Subject: [PATCH] Readme for Version 1.4.3F. --- README.md | 23 ++++++++++------------- 1 file changed, 10 insertions(+), 13 deletions(-) diff --git a/README.md b/README.md index 2f9d3ee..b04d68d 100644 --- a/README.md +++ b/README.md @@ -11,18 +11,15 @@ Needed libraries: Arduino Libraries, ArduinoOTA (included in ESP32 2.0.2+), Sma For instructions on usage of the firmware, see "Usage". -For those **WANTING** to use this Watchy code without programming and having to install Arduino or PlatformIO, you *CAN* install it with the base Watchy face you received when you got your Watchy. +Below is a layout of the Watchy Connect & the OTA Website (used while online your network) that gives you options to various things. + + +![OTA Website](https://github.com/GuruSR/Watchy_GSR/blob/main/Images/Server-Help.png) + +The only OTA update (for which the Bin folder holds) is possible via an OTA compatible firmware which are: + +`Watchy GSR` and those overriding it. + +** If you have an OTA upload function in your firmware, ask for it to be added here. ** -1. Download the Bin folder's file `GSR.ino.esp32.bin` onto the machine that you can connect your Watchy to by WiFi (laptop, cellphone, tablet, etc). -2. Once downloaded, for speed, turn the WiFi off on the device you're going to use with the Watchy, but keep the WiFi settings open. -3. Go into the Watchy's menu, push up (so it goes up to the bottom) until you stop on Setup WiFi. Press Menu to continue. -4. Turn your device's WiFi back on and find the `"Watchy AP"` connection on your device and connect to it. -5. Once connected, go to a web browser and type in the IP address from the Watchy's screen in the address bar of the web browser and press Enter. -6. On the web page that showed up, you'll see a button called `"Update"`, click that (left side of image below). -![WiFiManager](https://github.com/GuruSR/Watchy_GSR/blob/main/Images/OTAUpdate.JPG) -7. Press the `Choose File` button (right side of image above) then locate and select the `GSR.ino.esp32.bin` you downloaded in Step 1. -8. Click the RED colored button below that showed up and wait. (It doesn't show any progress until it says it failed or succeeded.) -9. If all went well, you'll see the success message and your Watchy will reboot with this Watchy face. -10. If you didn't get this far, then you either didn't connect to Watchy AP fast enough or something else happened, so try again at Step 2. - For those wanting to override the looks of this Watchy face, look at the Override Information.