diff --git a/src/Compilation Instructions.txt b/src/Compilation Instructions.txt
index 83e65fc..12cf5aa 100644
--- a/src/Compilation Instructions.txt	
+++ b/src/Compilation Instructions.txt	
@@ -14,21 +14,30 @@ Requires Watchy base 1.2.9 or greater, as well as the above libraries.  When edi
 
 You'll need to edit 2 files:
 
+**NOTE** The two files can be found in Arduino->Libraries->GxEPD2->src->epd (for PlatformIO, you'll need to look where it is stored for your setup).
+
 GxEPD2_154_D67.cpp:
 
-Insert the following code past the following:  (Note, the uint8/16_t's below can either be uint8_t or uint16_t based on GxEPD2 version, don't copy those lines.)
+Copy the code below:
+
+bool IsDark;                                    // GuruSR:  Changed for setDarkBorder
+void GxEPD2_154_D67::setDarkBorder(bool Dark){  // GuruSR:  Changed for setDarkBorder
+	IsDark=Dark;                                  // GuruSR:  Changed for setDarkBorder
+}                                               // GuruSR:  Changed for setDarkBorder
+
+And add it to just under this code:  (Note, the uint8/16_t's below can either be uint8_t or uint16_t based on GxEPD2 version, don't copy those lines.)
 
 GxEPD2_154_D67::GxEPD2_154_D67(int8/16_t cs, int8/16_t dc, int8/16_t rst, int8/16_t busy) :
   GxEPD2_EPD(cs, dc, rst, busy, HIGH, 10000000, WIDTH, HEIGHT, panel, hasColor, hasPartialUpdate, hasFastPartialUpdate)
 {
 }
 
-to read:
+So when you're done, it looks like this:
 
-GxEPD2_154_D67::GxEPD2_154_D67(int8/16_t cs, int8/16_t dc, int8/16_t rst, int8/16_t busy) :  <- DO NOT COPY THIS
-  GxEPD2_EPD(cs, dc, rst, busy, HIGH, 10000000, WIDTH, HEIGHT, panel, hasColor, hasPartialUpdate, hasFastPartialUpdate)  <- DO NOT COPY THIS
-{  <- DO NOT COPY THIS
-}  <- DO NOT COPY THIS
+GxEPD2_154_D67::GxEPD2_154_D67(int8/16_t cs, int8/16_t dc, int8/16_t rst, int8/16_t busy) :
+  GxEPD2_EPD(cs, dc, rst, busy, HIGH, 10000000, WIDTH, HEIGHT, panel, hasColor, hasPartialUpdate, hasFastPartialUpdate)
+{
+}
 
 bool IsDark;                                    // GuruSR:  Changed for setDarkBorder
 void GxEPD2_154_D67::setDarkBorder(bool Dark){  // GuruSR:  Changed for setDarkBorder
@@ -49,7 +58,7 @@ void GxEPD2_154_D67::_InitDisplay()
   _writeData(0x00);
   _writeData(0x00);
   _writeCommand(0x3C); // BorderWavefrom
-  _writeData(0x05);
+  _writeData(0x05);      <- THIS LINE NEEDS TO BE CHANGED, LOOK BELOW!
   _writeCommand(0x18); // Read built-in temperature sensor
   _writeData(0x80);
   _setPartialRamArea(0, 0, WIDTH, HEIGHT);
@@ -74,11 +83,23 @@ void GxEPD2_154_D67::_InitDisplay()
   _setPartialRamArea(0, 0, WIDTH, HEIGHT);                  <- DO NOT COPY THIS
 }
 
-Edit GxEPD2_154_D67.h to include the following after:
+Edit GxEPD2_154_D67.h:
+
+After:
+#define _GxEPD2_154_D67_H_
+
+Add:
+#define GxEPD2DarkBorder
+
+It should look like this:
+#define _GxEPD2_154_D67_H_
+#define GxEPD2DarkBorder
+
+Further down look for:
 
 void hibernate(); // turns powerOff() and sets controller to deep sleep for minimum power use, ONLY if wakeable by RST (rst >= 0)
 
-to:
+Add the void setDarkBorder line below after the line above so it looks like:
 
 void hibernate(); // turns powerOff() and sets controller to deep sleep for minimum power use, ONLY if wakeable by RST (rst >= 0)
 void setDarkBorder(bool Dark);        // GuruSR:  Changed for setDarkBorder
diff --git a/src/Watchy_GSR.cpp b/src/Watchy_GSR.cpp
index f3aa3f4..f3a8017 100644
--- a/src/Watchy_GSR.cpp
+++ b/src/Watchy_GSR.cpp
@@ -386,6 +386,9 @@ void WatchyGSR::init(String datetime){
             Darkness.Woke=true;
             Darkness.Last=millis();
             Darkness.Tilt=Darkness.Last;
+#ifndef GxEPD2DarkBorder
+            Options.Border=false;
+#endif
             break;
     }
 
@@ -1774,12 +1777,14 @@ void WatchyGSR::handleButtonPress(uint8_t Pressed){
                   UpdateDisp = true;  // Quick Update.
                   SetTurbo();
               }else if (Menu.Item == MENU_BRDR){  // Border Mode
+#ifdef GxEPD2DarkBorder
                   Options.Border = !Options.Border;
                   Options.NeedsSaving = true;
                   Updates.Init = true;
                   DoHaptic = true;
                   UpdateDisp = true;  // Quick Update.
                   SetTurbo();
+#endif
               }else if (Menu.Item == MENU_ORNT){  // Watchy Orientation
                   Options.Orientated = !Options.Orientated;
                   Options.NeedsSaving = true;
@@ -3108,7 +3113,11 @@ void WatchyGSR::StoreSettings(String FromUser){
         Options.TwentyFour = (V & 1) ? true : false;
         Options.LightMode = (V & 2) ? true : false;
         Options.Feedback = (V & 4) ? true : false;
+#ifdef GxEPD2DarkBorder
         Options.Border = (V & 8) ? true : false;
+#else
+        Options.Border = false;
+#endif
         Options.Lefty = (V & 16) ? true : false;
         Options.Swapped = (V & 32) ? true : false;
         Options.Orientated = (V & 64) ? true : false;
@@ -3300,7 +3309,9 @@ uint8_t WatchyGSR::getTXOffset(wifi_power_t Current){
 }
 
 void WatchyGSR::DisplayInit(bool ForceDark){
+#ifdef GxEPD2DarkBorder
   display.epd2.setDarkBorder(Options.Border | ForceDark);
+#endif
   if (Updates.Init){
     display.init(0,Rebooted,10,true);  // Force it here so it fixes the border.
     Updates.Init=false;
diff --git a/src/Watchy_GSR.h b/src/Watchy_GSR.h
index a8f89cc..444e4e9 100644
--- a/src/Watchy_GSR.h
+++ b/src/Watchy_GSR.h
@@ -39,7 +39,7 @@ class WatchyGSR{
         static SmallRTC SRTC;
         static SmallNTP SNTP;
         static GxEPD2_BW<GxEPD2_154_D67, GxEPD2_154_D67::HEIGHT> display;
-        static constexpr const char* Build = "1.4.3G";
+        static constexpr const char* Build = "1.4.3H";
         enum DesOps {dSTATIC, dLEFT, dRIGHT, dCENTER};
 
     public: