diff --git a/src/Defines_GSR.h b/src/Defines_GSR.h
index c962725..f40ccb7 100644
--- a/src/Defines_GSR.h
+++ b/src/Defines_GSR.h
@@ -1,8 +1,7 @@
 #ifndef DEFINES_GSR_H
 #define DEFINES_GSR_H
 
-// Watchy has the newer PCF8563 RTC clock.
-//#define PCF8563RTC 1
+#define __cplusplus 1
 
 //debug
 #define USEDEBUG 1  // !0 is on, will not setup Serial OR print output if zero.
@@ -10,7 +9,7 @@
 //display
 #define SOFTWARE_VERSION_MAJOR 1
 #define SOFTWARE_VERSION_MINOR 3
-#define SOFTWARE_VERSION_PATCH 3
+#define SOFTWARE_VERSION_PATCH 4
 #define HARDWARE_VERSION_MAJOR 1
 #define HARDWARE_VERSION_MINOR 0
 
@@ -107,11 +106,6 @@
 #define AlarmSetup 1234567890
 
 //pins
-#ifndef PCF8563RTC
-#define ADC_PIN 33
-#else
-#define ADC_PIN 35
-#endif
 #define RTC_PIN GPIO_NUM_27
 #define CS 5
 #define DC 10
diff --git a/src/Watchy_GSR.cpp b/src/Watchy_GSR.cpp
index 7793db8..521ded0 100644
--- a/src/Watchy_GSR.cpp
+++ b/src/Watchy_GSR.cpp
@@ -138,12 +138,7 @@ RTC_DATA_ATTR struct dispUpdate {
 RTC_DATA_ATTR BMA423 sensor;
 #endif
 
-#ifndef PCF8563RTC
-DS3232RTC WatchyGSR::RTC(false); 
-#else
-PCF8563 WatchyGSR::RTC(false);
-#endif
-
+WatchyRTC WatchyGSR::RTC;
 GxEPD2_BW<GxEPD2_154_D67, GxEPD2_154_D67::HEIGHT> WatchyGSR::display(GxEPD2_154_D67(CS, DC, RESET, BUSY));
 
 volatile uint8_t Button;
@@ -197,7 +192,7 @@ void WatchyGSR::setupDefaults(){
     Steps.Minutes = 0;
 }
 
-void WatchyGSR::init(){
+void WatchyGSR::init(String datetime){
     uint64_t wakeupBit;
     int AlarmIndex, Pushed;                          // Alarm being played.
     bool WaitForNext, Pulse, DoOnce, B;
@@ -207,6 +202,7 @@ void WatchyGSR::init(){
     esp_sleep_wakeup_cause_t wakeup_reason;
     Wire.begin(SDA, SCL); //init i2c
     NVS.begin();
+    RTC.init();
 
     pinMode(MENU_BTN_PIN, INPUT);   // Prep these for the loop below.
     pinMode(BACK_BTN_PIN, INPUT);
@@ -229,7 +225,7 @@ void WatchyGSR::init(){
             WatchTime.Drifting += Options.Drift;
             IDidIt = true;
             UpdateUTC();
-            RTC.alarm(ALARM_2); //resets the alarm flag in the RTC
+            RTC.clearAlarm(); //resets the alarm flag in the RTC
             WatchTime.EPSMS = (millis() + (1000 * (60 - WatchTime.UTC.Second)));
             WatchTime.NewMinute = true;
             RefreshCPU(CPUMAX);
@@ -247,7 +243,7 @@ void WatchyGSR::init(){
         default: //reset
             initZeros();
             setupDefaults();
-            _rtcConfig();
+            RTC.config(datetime);
             _bmaConfig();
             UpdateUTC();
             B = NVS.getString("GSR-TZ",S);
@@ -1260,7 +1256,7 @@ void WatchyGSR::ProcessNTP(){
       }
       WatchTime.UTC_RAW = time(nullptr);
       breakTime(WatchTime.UTC_RAW,WatchTime.UTC);
-      RTC.write(WatchTime.UTC);
+      RTC.set(WatchTime.UTC);
       WatchTime.Drifting = 0;
       WatchTime.EPSMS = (millis() + (1000 * (60 - WatchTime.UTC.Second)));
       WatchTime.WatchyRTC = esp_timer_get_time() + ((60 - WatchTime.UTC.Second) * 1000000);
@@ -2143,14 +2139,6 @@ void WatchyGSR::ManageTime(){
     }
 }
 
-void WatchyGSR::_rtcConfig() {
-  tmElements_t TM;
-  RTC.squareWave(SQWAVE_NONE); //disable square wave output
-  RTC.setAlarm(ALM2_EVERY_MINUTE, 0, 0, 0, 0); //alarm wakes up Watchy every minute
-  RTC.alarmInterrupt(ALARM_2, true); //enable alarm interrupt
-  RTC.read(TM);
-}
-
 void WatchyGSR::_bmaConfig() {
 
   if (sensor.begin(_readRegister, _writeRegister, delay) == false) {
@@ -2248,10 +2236,11 @@ void WatchyGSR::_bmaConfig() {
 
 float WatchyGSR::getBatteryVoltage(){
     float A, B, C, D;
-    A = analogRead(ADC_PIN) - 0.0125;
-    B = analogRead(ADC_PIN) - 0.0125;
-    C = analogRead(ADC_PIN) - 0.0125;
-    D = analogRead(ADC_PIN) - 0.0125;
+    WatchyBatt Batt;
+    A = Batt.Read(RTC) - 0.0125;
+    B = Batt.Read(RTC) - 0.0125;
+    C = Batt.Read(RTC) - 0.0125;
+    D = Batt.Read(RTC) - 0.0125;
     return (((A + B + C + D) / 16384.0) * 7.23);
 }
 
diff --git a/src/Watchy_GSR.h b/src/Watchy_GSR.h
index 97cd4a7..65076bd 100644
--- a/src/Watchy_GSR.h
+++ b/src/Watchy_GSR.h
@@ -15,13 +15,11 @@
 #include <WiFiManager.h>
 #include <HTTPClient.h>
 #include <Arduino_JSON.h>
-#ifndef PCF8563RTC
 #include <DS3232RTC.h>
-#else
-#include <PCF8563.h>
-#endif
+#include <Rtc_Pcf8563.h>
+#include "WatchyBattery.h"
 #include "GxEPD2_BW.h"
-#include "mbedtls/base64.h"
+#include <mbedtls/base64.h>
 #include <Wire.h>
 #include <bma.h>
 
@@ -37,15 +35,11 @@
 
 class WatchyGSR{
     public:
-#ifndef PCF8563RTC
-        static DS3232RTC RTC;
-#else
-        static PCF8563 RTC;
-#endif
+        static WatchyRTC RTC;
         static GxEPD2_BW<GxEPD2_154_D67, GxEPD2_154_D67::HEIGHT> display;
     public:
         WatchyGSR();
-        void init();
+        void init(String datetime = "");
         void showWatchFace();
         void drawWatchFace(); //override this method for different watch faces
         void drawTime();