mirror of
https://github.com/ByteWelder/Tactility.git
synced 2026-08-17 23:55:04 +00:00
140 lines
3.5 KiB
Plaintext
140 lines
3.5 KiB
Plaintext
/dts-v1/;
|
|
|
|
#include <tactility/bindings/battery_sense.h>
|
|
#include <tactility/bindings/root.h>
|
|
#include <tactility/bindings/esp32_adc_oneshot.h>
|
|
#include <tactility/bindings/esp32_ble.h>
|
|
#include <tactility/bindings/esp32_gpio.h>
|
|
#include <tactility/bindings/esp32_grove.h>
|
|
#include <tactility/bindings/esp32_i2c.h>
|
|
#include <tactility/bindings/esp32_i2s.h>
|
|
#include <tactility/bindings/esp32_ledc_backlight.h>
|
|
#include <tactility/bindings/esp32_sdspi.h>
|
|
#include <tactility/bindings/esp32_spi.h>
|
|
#include <tactility/bindings/esp32_wifi_pinned.h>
|
|
#include <tactility/bindings/esp32_uart.h>
|
|
|
|
#include <bindings/gt911.h>
|
|
#include <bindings/st7789.h>
|
|
#include <bindings/tdeck_keyboard.h>
|
|
#include <bindings/tdeck_keyboard_backlight.h>
|
|
|
|
// Reference: https://wiki.lilygo.cc/get_started/en/Wearable/T-Deck-Plus/T-Deck-Plus.html#Pin-Overview
|
|
/ {
|
|
compatible = "root";
|
|
model = "LilyGO T-Deck";
|
|
|
|
adc0 {
|
|
compatible = "espressif,esp32-adc-oneshot";
|
|
unit-id = <ADC_UNIT_1>;
|
|
clk-src = <ADC_RTC_CLK_SRC_DEFAULT>;
|
|
channels = <ADC_CHANNEL_3 ADC_ATTEN_DB_12 ADC_BITWIDTH_DEFAULT>;
|
|
};
|
|
|
|
battery-sense {
|
|
compatible = "battery-sense";
|
|
io-channels = <&adc0 0>;
|
|
reference-voltage-mv = <3300>;
|
|
multiplier = <2110>;
|
|
};
|
|
|
|
wifi0 {
|
|
compatible = "espressif,esp32-wifi-pinned";
|
|
status = "disabled";
|
|
};
|
|
|
|
ble0 {
|
|
compatible = "espressif,esp32-ble";
|
|
status = "disabled";
|
|
};
|
|
|
|
gpio0 {
|
|
compatible = "espressif,esp32-gpio";
|
|
gpio-count = <49>;
|
|
};
|
|
|
|
i2c_internal: i2c0 {
|
|
compatible = "espressif,esp32-i2c";
|
|
port = <I2C_NUM_0>;
|
|
clock-frequency = <100000>;
|
|
pin-sda = <&gpio0 18 GPIO_FLAG_NONE>;
|
|
pin-scl = <&gpio0 8 GPIO_FLAG_NONE>;
|
|
|
|
touch {
|
|
compatible = "goodix,gt911";
|
|
reg = <0x5D>;
|
|
x-max = <240>;
|
|
y-max = <320>;
|
|
swap-xy;
|
|
mirror-x;
|
|
pin-interrupt = <&gpio0 16 GPIO_FLAG_NONE>;
|
|
};
|
|
|
|
keyboard {
|
|
compatible = "lilygo,tdeck-keyboard";
|
|
reg = <0x55>;
|
|
};
|
|
|
|
keyboard_backlight {
|
|
compatible = "lilygo,tdeck-keyboard-backlight";
|
|
reg = <0x55>;
|
|
};
|
|
};
|
|
|
|
i2s0 {
|
|
compatible = "espressif,esp32-i2s";
|
|
port = <I2S_NUM_0>;
|
|
pin-bclk = <&gpio0 7 GPIO_FLAG_NONE>;
|
|
pin-ws = <&gpio0 5 GPIO_FLAG_NONE>;
|
|
pin-data-out = <&gpio0 6 GPIO_FLAG_NONE>;
|
|
};
|
|
|
|
display_backlight {
|
|
compatible = "espressif,esp32-ledc-backlight";
|
|
// Off by default so dispaly power-on won't show the screen from before the last power loss.
|
|
// The display backlight is turned on during the boot process.
|
|
status = "disabled";
|
|
pin-backlight = <&gpio0 42 GPIO_FLAG_NONE>;
|
|
// 32 KHz and higher causes the screen to start dimming again above 80% brightness
|
|
// when moving the brightness slider rapidly from a lower setting to 100% (debug-traced, not a slider bug).
|
|
frequency-hz = <30000>;
|
|
};
|
|
|
|
spi0 {
|
|
compatible = "espressif,esp32-spi";
|
|
host = <SPI2_HOST>;
|
|
cs-gpios = <&gpio0 12 GPIO_FLAG_NONE>, // Display
|
|
<&gpio0 39 GPIO_FLAG_NONE>, // SD card
|
|
<&gpio0 9 GPIO_FLAG_NONE>; // Radio
|
|
pin-mosi = <&gpio0 41 GPIO_FLAG_NONE>;
|
|
pin-miso = <&gpio0 38 GPIO_FLAG_NONE>;
|
|
pin-sclk = <&gpio0 40 GPIO_FLAG_NONE>;
|
|
|
|
display@0 {
|
|
compatible = "sitronix,st7789";
|
|
horizontal-resolution = <320>;
|
|
vertical-resolution = <240>;
|
|
swap-xy;
|
|
mirror-x;
|
|
invert-color;
|
|
pixel-clock-hz = <62500000>;
|
|
pin-dc = <&gpio0 11 GPIO_FLAG_NONE>;
|
|
backlight = <&display_backlight>;
|
|
};
|
|
|
|
// Must be started after display
|
|
sdcard@1 {
|
|
compatible = "espressif,esp32-sdspi";
|
|
status = "disabled";
|
|
frequency-khz = <20000>;
|
|
};
|
|
};
|
|
|
|
uart0 {
|
|
compatible = "espressif,esp32-uart";
|
|
port = <UART_NUM_1>;
|
|
pin-tx = <&gpio0 43 GPIO_FLAG_NONE>;
|
|
pin-rx = <&gpio0 44 GPIO_FLAG_NONE>;
|
|
};
|
|
};
|