2026-09-20 00:19:11 +02:00

208 lines
8.3 KiB
C

// SPDX-License-Identifier: Apache-2.0
#pragma once
#ifdef __cplusplus
extern "C" {
#endif
#include <stdint.h>
#include <stdbool.h>
#include <tactility/device.h>
#include <tactility/error.h>
/**
* @brief Named Unicode codepoints for KeyboardKeyData::key.
*
* Some common codepoints.
* There are no official codepoints for arrow keys, so we use the symbols as placeholder.
* Subsystems like LVGL can translate these special codepoints to specific actions.
*/
typedef enum {
CODEPOINT_ENTER = '\r',
CODEPOINT_ESCAPE = '\x1B',
CODEPOINT_BACKSPACE = '\b',
CODEPOINT_DELETE = '\x7F',
CODEPOINT_TAB = '\t',
CODEPOINT_ARROW_LEFT = 0x2190,
CODEPOINT_ARROW_UP = 0x2191,
CODEPOINT_ARROW_RIGHT = 0x2192,
CODEPOINT_ARROW_DOWN = 0x2193,
CODEPOINT_HOME = 0x21F1,
CODEPOINT_END = 0x21F2,
} CodePoint;
/**
* @brief A single key event read from a keyboard device.
*/
struct KeyboardKeyData {
/**
* @brief The key. Always a Unicode codepoint - never a raw scan code.
*
* For a key that produces a character, this is that character's codepoint (e.g. 'a', ' '). For
* a key with no character representation, or one of the handful of C0 control keys every
* driver needs, this is one of the CodePoint enum values above - never an LVGL LV_KEY_*
* constant directly. See ctrl's doc comment below for the CodePoint values that numerically
* collide with real C0 control codes.
*/
uint32_t key;
/** @brief True if the key was pressed, false if released. */
bool pressed;
/**
* @brief True if another key event is already queued and read_key() should be called again
* immediately to drain it. False if this was the last pending event.
*/
bool continue_reading;
/**
* @brief True if Ctrl was held when this key was pressed.
*
* Reported separately rather than folded into `key` because the two encodings collide: the C0
* control codes a terminal expects for Ctrl chords (Ctrl+C is 0x03, Ctrl+K is 0x0B, ...) overlap
* the four CodePoint values that remain in true C0 range (CODEPOINT_ENTER is Ctrl+M/13,
* CODEPOINT_BACKSPACE is Ctrl+H/8, CODEPOINT_TAB is Ctrl+I/9, CODEPOINT_ESCAPE is Ctrl+[/27), so
* a single uint32_t cannot express both. Consumers that want control codes derive them here, e.g.
* `((key >= 'a' && key <= 'z') || (key >= 'A' && key <= 'Z')) ? (key & 0x1F) : key`
* when ctrl is set.
*
* Drivers whose hardware cannot report Ctrl leave this false.
*/
bool ctrl;
/**
* @brief True if Alt was held when this key was pressed. See ctrl for why modifiers are reported
* separately. Drivers whose hardware cannot report Alt leave this false.
*/
bool alt;
/**
* @brief Standard USB HID keyboard usage code for this key (USB HID Usage Tables, page 0x07),
* or 0 if this driver doesn't compute one (most don't - `key` is the only field most consumers need).
* Populated by drivers whose hardware layout maps cleanly onto HID usage codes, so consumers that
* want to mirror physical key presses as real HID reports (e.g. USB HID output) don't have to
* reverse-engineer one out of `key`'s codepoint encoding.
* Encoding is lossy for keys with no Unicode/LVGL representation at all, e.g. F1-F12.
*/
uint8_t hid_keycode;
/**
* @brief HID modifier bitmask (report byte 0: bit0=LeftCtrl, bit1=LeftShift, bit2=LeftAlt,
* bit3=LeftGui, bit4-7=Right variants) matching hid_keycode, or 0 if hid_keycode is 0.
*/
uint8_t hid_modifier;
};
/**
* @brief Number of key events that can be queued per subscription in the default
* subscribe/unsubscribe/poll implementation before older subscribers' fanned-out events start
* being dropped for that subscriber (silently, preserving FIFO order of what's already queued).
*/
#define KEYBOARD_EVENT_QUEUE_CAPACITY 4
/**
* @brief Caller-owned subscription node for keyboard_subscribe()/keyboard_unsubscribe()/
* keyboard_poll().
* @warning `internal` is private to keyboard.cpp; do not read or write it directly.
*/
struct KeyboardEventSubscription {
struct {
struct Device* device;
struct KeyboardKeyData queue[KEYBOARD_EVENT_QUEUE_CAPACITY];
uint8_t head;
uint8_t count;
struct KeyboardEventSubscription* next;
} internal;
};
/**
* @brief API for keyboard drivers.
*/
struct KeyboardApi {
/**
* @brief Reads the next pending key event, if any.
* May be NULL if the driver instead pushes events itself via keyboard_emit_key() (e.g. from a dedicated interrupt-handling task).
* @param[in] device the keyboard device
* @param[out] data the key event data
* @retval ERROR_NONE when the operation was successful
*/
error_t (*read_key)(struct Device* device, struct KeyboardKeyData* data);
/**
* @brief Returns the backlight if the keyboard has one.
* @warning Returns a referenced device. Must call device_put() afterwards.
* @param[in] device the keyboard device
* @param[out] backlight_device the output backlight device
* @retval ERROR_NONE when the backlight_device was set
* @retval ERROR_NOT_SUPPORTED when this device has no backlight
*/
error_t (*get_backlight)(struct Device* device, struct Device** backlight_device);
/**
* @deprecated Use Driver::probe + device_hotplug_register() instead (see DEVICE_FLAG_HOTPLUG)
* The kernel then starts/stops the device itself instead of leaving it started forever.
* When DEVICE_FLAG_HOTPLUG is used, use device_is_ready() only for checking if a keyboard is usable.
*/
bool (*is_present)(struct Device* device);
};
/**
* @brief Reads the next pending key event using the specified keyboard device. Also fans the
* result out to every keyboard_subscribe()'d subscriber, same as keyboard_emit_key().
* @retval ERROR_NONE @a data filled - key == 0 if nothing is pending
* @retval ERROR_INVALID_STATE @a device isn't currently started (e.g. hotplug-absent)
* @retval ERROR_NOT_SUPPORTED the driver has no KeyboardApi::read_key (it pushes events via
* keyboard_emit_key() instead)
*/
error_t keyboard_read_key(struct Device* device, struct KeyboardKeyData* data);
/**
* @brief Push a key event from @a device to every current subscriber (see keyboard_subscribe()).
* For a driver whose hardware delivers key events asynchronously (e.g. from a dedicated
* interrupt-handling task) rather than on demand - KeyboardApi::read_key may be left NULL when
* the driver calls this instead.
* @warning Not ISR-safe (takes a mutex); call from a task, not directly from interrupt context.
* @param[in] device the keyboard device the event originated from
* @param[in] data the key event
*/
void keyboard_emit_key(struct Device* device, struct KeyboardKeyData data);
/**
* @brief Returns the backlight if the keyboard has one.
* @warning Returns a referenced device. Must call device_put() afterwards.
* @param[in] device the keyboard device
* @param[out] backlight_device the output backlight device
* @retval ERROR_NONE when the backlight_device was set
* @retval ERROR_NOT_SUPPORTED when this device has no backlight
*/
error_t keyboard_get_backlight(struct Device* device, struct Device** backlight_device);
/**
* @deprecated See KeyboardApi::is_present.
* @param[in] device the keyboard device
*/
bool keyboard_is_present(struct Device* device);
/**
* @brief Register @a sub for async key events from @a device, derived from `read_key`.
* @param[in,out] sub subscription to register; owns the storage, must stay alive (and stationary)
* until unsubscribed
* @retval ERROR_NONE on success
*/
error_t keyboard_subscribe(struct Device* device, struct KeyboardEventSubscription* sub);
/**
* @brief Remove a subscription previously registered with keyboard_subscribe().
* @retval ERROR_NONE on success
*/
error_t keyboard_unsubscribe(struct Device* device, struct KeyboardEventSubscription* sub);
/**
* @brief Non-blocking: pop the next event for @a sub if one is already queued.
* @warning Never blocks.
* @retval ERROR_NONE @a out_data was filled
* @retval ERROR_TIMEOUT nothing queued right now
*/
error_t keyboard_poll(struct Device* device, struct KeyboardEventSubscription* sub, struct KeyboardKeyData* out_data);
extern const struct DeviceType KEYBOARD_TYPE;
#ifdef __cplusplus
}
#endif