mirror of
https://github.com/ByteWelder/Tactility.git
synced 2026-02-18 10:53:17 +00:00
1deaf4c426
* feat(board): add support for CYD-2432S028R board and update XPT2046 driver
- Added CONFIG_TT_BOARD_CYD_2432S028R in Kconfig.
- Included support for CYD2432S028R in Boards.h and board.cmake.
- Updated Xpt2046Touch driver to use configuration->spiDevice instead of SPI2_HOST when creating the SPI handle.
- Note: SD card is not working on this board yet.
This commit introduces full support for the CYD-2432S028R board and improves the touchscreen driver flexibility by allowing dynamic SPI device configuration. SD card functionality still needs to be implemented.
* Added a new GitHub Actions job to build firmware for the cyd-2432s028r board
using the existing build-firmware action. This ensures continuous integration
coverage for the new board alongside other supported ESP32 variants.
* Removed unnecessary file
* Refactor CYD-2432S028R board initialization, touch, and SD drivers
- Updated board CMakeLists to use `XPT2046-Bitbang` instead of `XPT2046`.
- Added `YellowSdCard` support and initialized SD card in board configuration.
- Updated SPI pin assignments for touch and SD card to match hardware setup.
- Refactored touch driver to use bit-banged SPI with proper start/stop handling.
- Touch adaptation was based on a merge of:
- https://github.com/NellowTCS/Tactility/blob/main/Drivers/XPT2046-Bitbang/Source/XPT2046-Bitbang.cpp
- https://github.com/ddxfish/XPT2046_Bitbang_Arduino_Library/blob/main/XPT2046_Bitbang.cpp
- Calibration is currently static in code:
Calibration cal = {
.xMin = 100,
.xMax = 1900,
.yMin = 100,
.yMax = 1900
};
This removes the need for manual touchscreen calibration, but code was adjusted to support dynamic calibration in the future.
- Added comments and constants for software SPI touch pins.
- Updated `YellowDisplay` to use new touch driver configuration.
* Refactor XPT2046 touch driver: replace Bitbang with SoftSPI implementation, update CMake and README files
83 lines
2.9 KiB
C++
83 lines
2.9 KiB
C++
#include "CYD2432S028R.h"
|
|
#include "hal/YellowDisplay.h"
|
|
#include "hal/YellowConstants.h"
|
|
#include "hal/YellowSdCard.h"
|
|
#include <Tactility/lvgl/LvglSync.h>
|
|
#include <PwmBacklight.h>
|
|
#include <Tactility/hal/Configuration.h>
|
|
|
|
using namespace tt::hal;
|
|
|
|
bool initBoot() {
|
|
//Set the RGB Led Pins to output and turn them off
|
|
ESP_ERROR_CHECK(gpio_set_direction(GPIO_NUM_4, GPIO_MODE_OUTPUT)); //Red
|
|
ESP_ERROR_CHECK(gpio_set_direction(GPIO_NUM_16, GPIO_MODE_OUTPUT)); //Green
|
|
ESP_ERROR_CHECK(gpio_set_direction(GPIO_NUM_17, GPIO_MODE_OUTPUT)); //Blue
|
|
|
|
//0 on, 1 off... yep it's backwards.
|
|
ESP_ERROR_CHECK(gpio_set_level(GPIO_NUM_4, 1)); //Red
|
|
ESP_ERROR_CHECK(gpio_set_level(GPIO_NUM_16, 1)); //Green
|
|
ESP_ERROR_CHECK(gpio_set_level(GPIO_NUM_17, 1)); //Blue
|
|
|
|
return driver::pwmbacklight::init(CYD2432S028R_LCD_PIN_BACKLIGHT);
|
|
}
|
|
|
|
const Configuration cyd_2432s028r_config = {
|
|
.initBoot = initBoot,
|
|
.createDisplay = createDisplay,
|
|
.sdcard = createYellowSdCard(),
|
|
.power = nullptr,
|
|
.i2c = {},
|
|
.spi {
|
|
//Display
|
|
spi::Configuration {
|
|
.device = CYD2432S028R_LCD_SPI_HOST,
|
|
.dma = SPI_DMA_CH_AUTO,
|
|
.config = {
|
|
.mosi_io_num = GPIO_NUM_13,
|
|
.miso_io_num = GPIO_NUM_12,
|
|
.sclk_io_num = GPIO_NUM_14,
|
|
.quadwp_io_num = GPIO_NUM_NC,
|
|
.quadhd_io_num = GPIO_NUM_NC,
|
|
.data4_io_num = GPIO_NUM_NC,
|
|
.data5_io_num = GPIO_NUM_NC,
|
|
.data6_io_num = GPIO_NUM_NC,
|
|
.data7_io_num = GPIO_NUM_NC,
|
|
.data_io_default_level = false,
|
|
.max_transfer_sz = CYD_SPI_TRANSFER_SIZE_LIMIT,
|
|
.flags = 0,
|
|
.isr_cpu_id = ESP_INTR_CPU_AFFINITY_AUTO,
|
|
.intr_flags = 0
|
|
},
|
|
.initMode = spi::InitMode::ByTactility,
|
|
.isMutable = false,
|
|
.lock = tt::lvgl::getSyncLock()
|
|
},
|
|
|
|
// SDCard
|
|
spi::Configuration {
|
|
.device = CYD2432S028R_SDCARD_SPI_HOST,
|
|
.dma = SPI_DMA_CH_AUTO,
|
|
.config = {
|
|
.mosi_io_num = GPIO_NUM_23,
|
|
.miso_io_num = GPIO_NUM_19,
|
|
.sclk_io_num = GPIO_NUM_18,
|
|
.quadwp_io_num = GPIO_NUM_NC,
|
|
.quadhd_io_num = GPIO_NUM_NC,
|
|
.data4_io_num = GPIO_NUM_NC,
|
|
.data5_io_num = GPIO_NUM_NC,
|
|
.data6_io_num = GPIO_NUM_NC,
|
|
.data7_io_num = GPIO_NUM_NC,
|
|
.data_io_default_level = false,
|
|
.max_transfer_sz = 0,
|
|
.flags = 0,
|
|
.isr_cpu_id = ESP_INTR_CPU_AFFINITY_AUTO,
|
|
.intr_flags = 0
|
|
},
|
|
.initMode = tt::hal::spi::InitMode::ByTactility,
|
|
.isMutable = false,
|
|
.lock = tt::lvgl::getSyncLock() // esp_lvgl_port owns the lock for the display
|
|
},
|
|
}
|
|
};
|