description: Semtech SX1262 sub-GHz LoRa and (G)FSK transceiver

compatible: "semtech,sx1262"

bus: spi

properties:
  reg:
    type: int
    required: true
    description: Chip-select index on the parent SPI controller, must match the node's unit address
  spi-frequency-khz:
    type: int
    default: 4000
    description: SPI clock frequency in kHz
  pin-reset:
    type: phandles
    required: true
    description: NRESET line (must be an SoC GPIO)
  pin-busy:
    type: phandles
    required: true
    description: BUSY line (must be an SoC GPIO)
  pin-dio1:
    type: phandles
    required: true
    description: DIO1 interrupt line (must be an SoC GPIO)
  pin-enable:
    type: phandles
    default: GPIO_PIN_SPEC_NONE
    description: Optional module power enable, driven active while the device is started (any GPIO controller)
  pin-antenna-select:
    type: phandles
    default: GPIO_PIN_SPEC_NONE
    description: Optional antenna select, driven active while the device is started (any GPIO controller)
  tcxo-millivolts:
    type: int
    default: 0
    description: TCXO reference voltage on DIO3 in millivolts, 0 when no TCXO is fitted
  use-regulator-ldo:
    type: boolean
    default: false
    description: Use the LDO regulator instead of the DC-DC converter
  dio2-as-rf-switch:
    type: boolean
    default: false
    description: DIO2 drives the antenna TX/RX switch