#include "JC8048W550C.h" // Don't remove, or we get a linker error ("undefined reference to `cyd_jc8048w550c_config'" - GCC bug?)
#include "PwmBacklight.h"
#include "hal/CydDisplay.h"
#include "hal/CydSdCard.h"

using namespace tt::hal;

bool initBoot() {
    return driver::pwmbacklight::init(GPIO_NUM_2);
}

const Configuration cyd_jc8048w550c_config = {
    .initBoot = initBoot,
    .createDisplay = createDisplay,
    .sdcard = createSdCard(),
    .power = nullptr,
    .i2c = {
        //Touch
        i2c::Configuration {
            .name = "Internal",
            .port = I2C_NUM_0,
            .initMode = i2c::InitMode::ByTactility,
            .isMutable = true,
            .config = (i2c_config_t) {
                .mode = I2C_MODE_MASTER,
                .sda_io_num = GPIO_NUM_19,
                .scl_io_num = GPIO_NUM_20,
                .sda_pullup_en = true,
                .scl_pullup_en = true,
                .master = {
                    .clk_speed = 400000
                },
                .clk_flags = 0
            }
        },
        //P4 header, JST SH 1.25, GND / 3.3V / IO17 / IO18 or
        //P5 header, JST SH 1.0, GND / 3.3V / IO17 / IO18
        i2c::Configuration {
            .name = "External",
            .port = I2C_NUM_1,
            .initMode = i2c::InitMode::Disabled,
            .isMutable = true,
            .config = (i2c_config_t) {
                .mode = I2C_MODE_MASTER,
                .sda_io_num = GPIO_NUM_17,
                .scl_io_num = GPIO_NUM_18,
                .sda_pullup_en = true,
                .scl_pullup_en = true,
                .master = {
                    .clk_speed = 400000
                },
                .clk_flags = 0
            }
        }
    },
    .spi {
        //SD Card
        spi::Configuration {
            .device = SPI2_HOST,
            .dma = SPI_DMA_CH_AUTO,
            .config = {
                .mosi_io_num = GPIO_NUM_11,
                .miso_io_num = GPIO_NUM_13,
                .sclk_io_num = GPIO_NUM_12,
                .quadwp_io_num = GPIO_NUM_NC,
                .quadhd_io_num = GPIO_NUM_NC,
                .data4_io_num = GPIO_NUM_NC,
                .data5_io_num = GPIO_NUM_NC,
                .data6_io_num = GPIO_NUM_NC,
                .data7_io_num = GPIO_NUM_NC,
                .data_io_default_level = false,
                .max_transfer_sz = 8192,
                .flags = 0,
                .isr_cpu_id = ESP_INTR_CPU_AFFINITY_AUTO,
                .intr_flags = 0
            },
            .initMode = spi::InitMode::ByTactility,
            .isMutable = false,
            .lock = nullptr
        }
    },
    .uart {
        //P4 header, JST SH 1.0, GND / 3.3V / IO17 / IO18
        uart::Configuration {
            .name = "UART1",
            .port = UART_NUM_1,
            .rxPin = GPIO_NUM_17,
            .txPin = GPIO_NUM_18,
            .rtsPin = GPIO_NUM_NC,
            .ctsPin = GPIO_NUM_NC,
            .rxBufferSize = 1024,
            .txBufferSize = 1024,
            .config = {
                .baud_rate = 9600,
                .data_bits = UART_DATA_8_BITS,
                .parity    = UART_PARITY_DISABLE,
                .stop_bits = UART_STOP_BITS_1,
                .flow_ctrl = UART_HW_FLOWCTRL_DISABLE,
                .rx_flow_ctrl_thresh = 0,
                .source_clk = UART_SCLK_DEFAULT,
                .flags = {
                    .allow_pd = 0,
                    .backup_before_sleep = 0,
                }
            }
        }
    }
};