description: GalaxyCore GC0308 0.3MP camera sensor

include: [ "i2c-device.yaml" ]

compatible: "galaxycore,gc0308"

properties:
  rotation-offset:
    type: int
    enum: [ 0, 90, 180, 270 ]
    default: 0
    description: Clockwise mounting correction in degrees (0, 90, 180 or 270).
  xclk-frequency-hz:
    type: int
    default: 20000000
    description: DVP sensor master clock frequency.
  pin-d0:
    type: phandles
  pin-d1:
    type: phandles
  pin-d2:
    type: phandles
  pin-d3:
    type: phandles
  pin-d4:
    type: phandles
  pin-d5:
    type: phandles
  pin-d6:
    type: phandles
  pin-d7:
    type: phandles
  pin-vsync:
    type: phandles
  pin-de:
    type: phandles
  pin-pclk:
    type: phandles
  pin-xclk:
    type: phandles
    default: GPIO_PIN_SPEC_NONE
  pin-reset:
    type: phandles
    default: GPIO_PIN_SPEC_NONE
    description: >
      Reset GPIO pin. Pulsed (asserted then released, with a settle delay) before the sensor is probed in start_device. Typically wired through a board's IO expander rather than a direct SoC GPIO, so it's handled here via the generic gpio_descriptor API.