Tab5, CoreS3, StackChan and app icons (#662)

DTS modules (device modules) often have a single source file with an empty `struct Module`.
The module's yaml file now allows a `dts-only` boolean to be set, so the source file becomes optional.
`devicetree.yaml` is renamed everywhere to `module.yaml`

.claude/rules/architecture-device-model.md

@@ -7,4 +7,4 @@ The kernel uses a Linux-inspired device model:
 - **Device** (`struct Device`): represents hardware. Lifecycle: `device_construct` → `device_add` → `device_start`. Has a parent-child tree, driver binding, and locking.
 - **DeviceType** (`struct DeviceType`): enables discovering devices by category (e.g. `DISPLAY_TYPE`, `TOUCH_TYPE`, `UART_CONTROLLER_TYPE`).
 
-Devices are defined via **devicetree** `.dts` files in each `Devices/<id>/` folder. A custom devicetree compiler (`Buildscripts/DevicetreeCompiler/compile.py`) generates C code from these files. Each device folder also has a `devicetree.yaml` specifying dependencies and the `.dts` file.
+Devices are defined via **devicetree** `.dts` files in each `Devices/<id>/` folder. A custom devicetree compiler (`Buildscripts/DevicetreeCompiler/compile.py`) generates C code from these files. Each device folder also has a `module.yaml` specifying dependencies and the `.dts` file.

.claude/rules/hardware-abstraction-layer.md

@@ -30,7 +30,7 @@ Kernel module names are lower case and postfixed with `-module`.
 Projects that are kernel modules:
 
 1. Declare a `struct Module`
-2. Contain a `devicetree.yaml` file that declares a list of dependencies (for parsing the devicetree) and specifies the bindings folder that contains the drivers' YAML definitions. For example:
+2. Contain a `module.yaml` file that declares a list of dependencies (for parsing the devicetree) and specifies the bindings folder that contains the drivers' YAML definitions. For example:
 ```yaml
 dependencies:
   - TactilityKernel

Buildscripts/DevicetreeCompiler/compile.py

@@ -5,7 +5,7 @@ from source.main import main
 
 def print_help():
     print("Usage: python compile.py [in_file] [out_path] [arguments]\n")
-    print(f"\t[in_path]                 the path where the root devicetree.yaml file is")
+    print(f"\t[in_path]                 the path where the root module.yaml file is")
     print(f"\t[out_path]                output folder for C file output")
     print("")
     print("Optional arguments:\n")

Buildscripts/DevicetreeCompiler/dependencies.py

@@ -6,7 +6,7 @@ from source.config import parse_config
 
 def print_help():
     print("Usage: python dependencies.py [path]\n")
-    print("\t[in_file]                 the path where the root devicetree.yaml file is")
+    print("\t[in_file]                 the path where the root module.yaml file is")
 
 if __name__ == "__main__":
     if "--help" in sys.argv:
@@ -28,8 +28,10 @@ if __name__ == "__main__":
 
     # Device module is added first because it's started first:
     # It creates the root device, so it must exist before its children.
-    device_dependency = os.path.basename(os.path.normpath(yaml_directory))
+    # Skipped for dts-only devices: they have no CMakeLists.txt, so there's no component to require.
-    print(device_dependency)
+    if not config.dts_only:
+        device_dependency = os.path.basename(os.path.normpath(yaml_directory))
+        print(device_dependency)
     for dependency in config.dependencies:
         dependency_name = os.path.basename(os.path.normpath(dependency))
         print(dependency_name)

Buildscripts/DevicetreeCompiler/source/config.py

@@ -2,15 +2,18 @@ from dataclasses import dataclass, field
 import yaml
 import os
 
+from .exception import DevicetreeException
+
 @dataclass
 class DeviceTreeConfig:
     dependencies: list[str] = field(default_factory=list)
     bindings: list[str] = field(default_factory=list)
     dts: str = ""
+    dts_only: bool = False
 
 def parse_config(file_path: str, project_root: str) -> DeviceTreeConfig:
     """
-    Parses devicetree.yaml and recursively finds dependencies.
+    Parses module.yaml and recursively finds dependencies.
     Returns a list of DeviceTreeConfig objects in post-order (dependencies first).
     """
     config = DeviceTreeConfig([], [], "")
@@ -22,9 +25,9 @@ def parse_config(file_path: str, project_root: str) -> DeviceTreeConfig:
             return
         visited.add(abs_path)
 
-        # Try to see if it's a directory and contains devicetree.yaml
+        # Try to see if it's a directory and contains module.yaml
         if os.path.isdir(abs_path):
-            abs_path = os.path.join(abs_path, "devicetree.yaml")
+            abs_path = os.path.join(abs_path, "module.yaml")
 
         with open(abs_path, 'r') as f:
             data = yaml.safe_load(f) or {}
@@ -40,6 +43,10 @@ def parse_config(file_path: str, project_root: str) -> DeviceTreeConfig:
             config.dependencies += deps
             dts_path = data.get("dts", "")
             config.dts = os.path.join(current_path, dts_path)
+            dts_only = data.get("dts-only", False)
+            if not isinstance(dts_only, bool):
+                raise DevicetreeException(f"'dts-only' must be a boolean, got {dts_only!r}")
+            config.dts_only = dts_only
 
         bindings = data.get("bindings", "")
         if bindings:

Buildscripts/DevicetreeCompiler/source/generator.py

@@ -359,7 +359,7 @@ def generate_devicetree_c(filename: str, items: list[object], bindings: list[Bin
         # Gather module symbols
         module_symbol_names = []
         # Device's own module goes first (started before its dependency modules)
-        if config.dts:
+        if config.dts and not config.dts_only:
             device_dir = os.path.dirname(os.path.normpath(config.dts))
             device_name = os.path.basename(device_dir)
             if device_name:

Buildscripts/DevicetreeCompiler/tests/test_integration.py

@@ -59,7 +59,7 @@ def test_compile_invalid_dts():
         output_dir = os.path.join(tmp_dir, "output")
         os.makedirs(output_dir)
         
-        with open(os.path.join(bad_data_dir, "devicetree.yaml"), "w") as f:
+        with open(os.path.join(bad_data_dir, "module.yaml"), "w") as f:
             f.write("dts: bad.dts\nbindings: bindings")
         
         with open(os.path.join(bad_data_dir, "bad.dts"), "w") as f:
@@ -81,7 +81,7 @@ def write_minmax_config(tmp_dir, device_property_line, binding_min=0, binding_ma
     bindings_dir = os.path.join(config_dir, "bindings")
     os.makedirs(bindings_dir)
 
-    with open(os.path.join(config_dir, "devicetree.yaml"), "w") as f:
+    with open(os.path.join(config_dir, "module.yaml"), "w") as f:
         f.write("dts: test.dts\nbindings: bindings")
 
     with open(os.path.join(config_dir, "test.dts"), "w") as f:
@@ -214,7 +214,7 @@ def write_array_config(tmp_dir, device_property_line):
     bindings_dir = os.path.join(config_dir, "bindings")
     os.makedirs(bindings_dir)
 
-    with open(os.path.join(config_dir, "devicetree.yaml"), "w") as f:
+    with open(os.path.join(config_dir, "module.yaml"), "w") as f:
         f.write("dts: test.dts\nbindings: bindings")
 
     with open(os.path.join(config_dir, "test.dts"), "w") as f:

Devices/btt-panda-touch/CMakeLists.txt

@@ -1,7 +0,0 @@
-file(GLOB_RECURSE SOURCE_FILES source/*.c*)
-
-idf_component_register(
-    SRCS ${SOURCE_FILES}
-    INCLUDE_DIRS "source"
-    REQUIRES TactilityKernel
-)

Devices/btt-panda-touch/module.yaml

@@ -3,3 +3,4 @@ dependencies:
   - Drivers/rgb-display-module
   - Drivers/gt911-module
 dts: bigtreetech,panda-touch.dts
+dts-only: true

Devices/btt-panda-touch/source/module.cpp

@@ -1,14 +0,0 @@
-#include <tactility/module.h>
-
-extern "C" {
-
-Module btt_panda_touch_module = {
-    .name = "btt-panda-touch",
-    .start = nullptr,
-    .stop = nullptr,
-    .drivers = nullptr,
-    .symbols = nullptr,
-    .internal = nullptr
-};
-
-}

Devices/cyd-2432s022c/LICENSE-Apache-2.0.md

@@ -0,0 +1,195 @@
+Apache License
+==============
+
+_Version 2.0, January 2004_  
+_&lt;<http://www.apache.org/licenses/>&gt;_
+
+### Terms and Conditions for use, reproduction, and distribution
+
+#### 1. Definitions
+
+“License” shall mean the terms and conditions for use, reproduction, and
+distribution as defined by Sections 1 through 9 of this document.
+
+“Licensor” shall mean the copyright owner or entity authorized by the copyright
+owner that is granting the License.
+
+“Legal Entity” shall mean the union of the acting entity and all other entities
+that control, are controlled by, or are under common control with that entity.
+For the purposes of this definition, “control” means **(i)** the power, direct or
+indirect, to cause the direction or management of such entity, whether by
+contract or otherwise, or **(ii)** ownership of fifty percent (50%) or more of the
+outstanding shares, or **(iii)** beneficial ownership of such entity.
+
+“You” (or “Your”) shall mean an individual or Legal Entity exercising
+permissions granted by this License.
+
+“Source” form shall mean the preferred form for making modifications, including
+but not limited to software source code, documentation source, and configuration
+files.
+
+“Object” form shall mean any form resulting from mechanical transformation or
+translation of a Source form, including but not limited to compiled object code,
+generated documentation, and conversions to other media types.
+
+“Work” shall mean the work of authorship, whether in Source or Object form, made
+available under the License, as indicated by a copyright notice that is included
+in or attached to the work (an example is provided in the Appendix below).
+
+“Derivative Works” shall mean any work, whether in Source or Object form, that
+is based on (or derived from) the Work and for which the editorial revisions,
+annotations, elaborations, or other modifications represent, as a whole, an
+original work of authorship. For the purposes of this License, Derivative Works
+shall not include works that remain separable from, or merely link (or bind by
+name) to the interfaces of, the Work and Derivative Works thereof.
+
+“Contribution” shall mean any work of authorship, including the original version
+of the Work and any modifications or additions to that Work or Derivative Works
+thereof, that is intentionally submitted to Licensor for inclusion in the Work
+by the copyright owner or by an individual or Legal Entity authorized to submit
+on behalf of the copyright owner. For the purposes of this definition,
+“submitted” means any form of electronic, verbal, or written communication sent
+to the Licensor or its representatives, including but not limited to
+communication on electronic mailing lists, source code control systems, and
+issue tracking systems that are managed by, or on behalf of, the Licensor for
+the purpose of discussing and improving the Work, but excluding communication
+that is conspicuously marked or otherwise designated in writing by the copyright
+owner as “Not a Contribution.”
+
+“Contributor” shall mean Licensor and any individual or Legal Entity on behalf
+of whom a Contribution has been received by Licensor and subsequently
+incorporated within the Work.
+
+#### 2. Grant of Copyright License
+
+Subject to the terms and conditions of this License, each Contributor hereby
+grants to You a perpetual, worldwide, non-exclusive, no-charge, royalty-free,
+irrevocable copyright license to reproduce, prepare Derivative Works of,
+publicly display, publicly perform, sublicense, and distribute the Work and such
+Derivative Works in Source or Object form.
+
+#### 3. Grant of Patent License
+
+Subject to the terms and conditions of this License, each Contributor hereby
+grants to You a perpetual, worldwide, non-exclusive, no-charge, royalty-free,
+irrevocable (except as stated in this section) patent license to make, have
+made, use, offer to sell, sell, import, and otherwise transfer the Work, where
+such license applies only to those patent claims licensable by such Contributor
+that are necessarily infringed by their Contribution(s) alone or by combination
+of their Contribution(s) with the Work to which such Contribution(s) was
+submitted. If You institute patent litigation against any entity (including a
+cross-claim or counterclaim in a lawsuit) alleging that the Work or a
+Contribution incorporated within the Work constitutes direct or contributory
+patent infringement, then any patent licenses granted to You under this License
+for that Work shall terminate as of the date such litigation is filed.
+
+#### 4. Redistribution
+
+You may reproduce and distribute copies of the Work or Derivative Works thereof
+in any medium, with or without modifications, and in Source or Object form,
+provided that You meet the following conditions:
+
+* **(a)** You must give any other recipients of the Work or Derivative Works a copy of
+this License; and
+* **(b)** You must cause any modified files to carry prominent notices stating that You
+changed the files; and
+* **(c)** You must retain, in the Source form of any Derivative Works that You distribute,
+all copyright, patent, trademark, and attribution notices from the Source form
+of the Work, excluding those notices that do not pertain to any part of the
+Derivative Works; and
+* **(d)** If the Work includes a “NOTICE” text file as part of its distribution, then any
+Derivative Works that You distribute must include a readable copy of the
+attribution notices contained within such NOTICE file, excluding those notices
+that do not pertain to any part of the Derivative Works, in at least one of the
+following places: within a NOTICE text file distributed as part of the
+Derivative Works; within the Source form or documentation, if provided along
+with the Derivative Works; or, within a display generated by the Derivative
+Works, if and wherever such third-party notices normally appear. The contents of
+the NOTICE file are for informational purposes only and do not modify the
+License. You may add Your own attribution notices within Derivative Works that
+You distribute, alongside or as an addendum to the NOTICE text from the Work,
+provided that such additional attribution notices cannot be construed as
+modifying the License.
+
+You may add Your own copyright statement to Your modifications and may provide
+additional or different license terms and conditions for use, reproduction, or
+distribution of Your modifications, or for any such Derivative Works as a whole,
+provided Your use, reproduction, and distribution of the Work otherwise complies
+with the conditions stated in this License.
+
+#### 5. Submission of Contributions
+
+Unless You explicitly state otherwise, any Contribution intentionally submitted
+for inclusion in the Work by You to the Licensor shall be under the terms and
+conditions of this License, without any additional terms or conditions.
+Notwithstanding the above, nothing herein shall supersede or modify the terms of
+any separate license agreement you may have executed with Licensor regarding
+such Contributions.
+
+#### 6. Trademarks
+
+This License does not grant permission to use the trade names, trademarks,
+service marks, or product names of the Licensor, except as required for
+reasonable and customary use in describing the origin of the Work and
+reproducing the content of the NOTICE file.
+
+#### 7. Disclaimer of Warranty
+
+Unless required by applicable law or agreed to in writing, Licensor provides the
+Work (and each Contributor provides its Contributions) on an “AS IS” BASIS,
+WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied,
+including, without limitation, any warranties or conditions of TITLE,
+NON-INFRINGEMENT, MERCHANTABILITY, or FITNESS FOR A PARTICULAR PURPOSE. You are
+solely responsible for determining the appropriateness of using or
+redistributing the Work and assume any risks associated with Your exercise of
+permissions under this License.
+
+#### 8. Limitation of Liability
+
+In no event and under no legal theory, whether in tort (including negligence),
+contract, or otherwise, unless required by applicable law (such as deliberate
+and grossly negligent acts) or agreed to in writing, shall any Contributor be
+liable to You for damages, including any direct, indirect, special, incidental,
+or consequential damages of any character arising as a result of this License or
+out of the use or inability to use the Work (including but not limited to
+damages for loss of goodwill, work stoppage, computer failure or malfunction, or
+any and all other commercial damages or losses), even if such Contributor has
+been advised of the possibility of such damages.
+
+#### 9. Accepting Warranty or Additional Liability
+
+While redistributing the Work or Derivative Works thereof, You may choose to
+offer, and charge a fee for, acceptance of support, warranty, indemnity, or
+other liability obligations and/or rights consistent with this License. However,
+in accepting such obligations, You may act only on Your own behalf and on Your
+sole responsibility, not on behalf of any other Contributor, and only if You
+agree to indemnify, defend, and hold each Contributor harmless for any liability
+incurred by, or claims asserted against, such Contributor by reason of your
+accepting any such warranty or additional liability.
+
+_END OF TERMS AND CONDITIONS_
+
+### APPENDIX: How to apply the Apache License to your work
+
+To apply the Apache License to your work, attach the following boilerplate
+notice, with the fields enclosed by brackets `[]` replaced with your own
+identifying information. (Don't include the brackets!) The text should be
+enclosed in the appropriate comment syntax for the file format. We also
+recommend that a file or class name and description of purpose be included on
+the same “printed page” as the copyright notice for easier identification within
+third-party archives.
+
+    Copyright [yyyy] [name of copyright owner]
+    
+    Licensed under the Apache License, Version 2.0 (the "License");
+    you may not use this file except in compliance with the License.
+    You may obtain a copy of the License at
+    
+      http://www.apache.org/licenses/LICENSE-2.0
+    
+    Unless required by applicable law or agreed to in writing, software
+    distributed under the License is distributed on an "AS IS" BASIS,
+    WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+    See the License for the specific language governing permissions and
+    limitations under the License.
+

Devices/cyd-2432s022c/cyd,2432s022c.dts

@@ -0,0 +1,99 @@
+/dts-v1/;
+
+#include <tactility/bindings/root.h>
+#include <tactility/bindings/esp32_wifi_pinned.h>
+#include <tactility/bindings/esp32_gpio.h>
+#include <tactility/bindings/esp32_i2c_master.h>
+#include <tactility/bindings/esp32_spi.h>
+#include <tactility/bindings/esp32_sdspi.h>
+#include <tactility/bindings/esp32_pwm_ledc.h>
+#include <tactility/bindings/pwm_backlight.h>
+#include <tactility/bindings/esp32_usbdevice.h>
+#include <bindings/st7789_soft_i8080.h>
+#include <bindings/cst816s.h>
+#include <bindings/esp32_dac_speaker.h>
+
+/ {
+	compatible = "root";
+	model = "CYD 2432S022C";
+
+	wifi0 {
+		compatible = "espressif,esp32-wifi-pinned";
+	};
+
+	gpio0 {
+		compatible = "espressif,esp32-gpio";
+		gpio-count = <40>;
+	};
+
+	i2c0 {
+		compatible = "espressif,esp32-i2c-master";
+		port = <I2C_NUM_0>;
+		clock-frequency = <400000>;
+		pin-sda = <&gpio0 21 GPIO_FLAG_NONE>;
+		pin-scl = <&gpio0 22 GPIO_FLAG_NONE>;
+
+		touch {
+			compatible = "hynitron,cst816s";
+			reg = <0x15>;
+			x-max = <240>;
+			y-max = <320>;
+		};
+	};
+
+	display_backlight_pwm {
+		compatible = "espressif,esp32-pwm-ledc";
+		pin = <&gpio0 0 GPIO_FLAG_NONE>;
+		period-ns = <33333>;
+		ledc-timer = <0>;
+		ledc-channel = <0>;
+	};
+
+	display_backlight {
+		compatible = "pwm-backlight";
+		// Off by default so display power-on won't show the screen from before the last power loss.
+		// The display backlight is turned on during the boot process.
+		status = "disabled";
+		pwm = <&display_backlight_pwm>;
+	};
+
+display {
+		compatible = "sitronix,st7789-soft-i8080";
+		horizontal-resolution = <240>;
+		vertical-resolution = <320>;
+		pin-d0 = <&gpio0 15 GPIO_FLAG_NONE>;
+		pin-d1 = <&gpio0 13 GPIO_FLAG_NONE>;
+		pin-d2 = <&gpio0 12 GPIO_FLAG_NONE>;
+		pin-d3 = <&gpio0 14 GPIO_FLAG_NONE>;
+		pin-d4 = <&gpio0 27 GPIO_FLAG_NONE>;
+		pin-d5 = <&gpio0 25 GPIO_FLAG_NONE>;
+		pin-d6 = <&gpio0 33 GPIO_FLAG_NONE>;
+		pin-d7 = <&gpio0 32 GPIO_FLAG_NONE>;
+		pin-cs = <&gpio0 17 GPIO_FLAG_NONE>;
+		pin-dc = <&gpio0 16 GPIO_FLAG_NONE>;
+		pin-wr = <&gpio0 4 GPIO_FLAG_NONE>;
+		pin-rd = <&gpio0 2 GPIO_FLAG_NONE>;
+		backlight = <&display_backlight>;
+	};
+
+	spi1 {
+		compatible = "espressif,esp32-spi";
+		host = <SPI3_HOST>;
+		cs-gpios = <&gpio0 5 GPIO_FLAG_NONE>;
+		pin-mosi = <&gpio0 23 GPIO_FLAG_NONE>;
+		pin-miso = <&gpio0 19 GPIO_FLAG_NONE>;
+		pin-sclk = <&gpio0 18 GPIO_FLAG_NONE>;
+		miso-pull-up;
+
+		sdcard@0 {
+			compatible = "espressif,esp32-sdspi";
+			frequency-khz = <20000>;
+		};
+	};
+
+	speaker {
+		compatible = "espressif,esp32-dac-speaker";
+		pin = <&gpio0 26 GPIO_FLAG_NONE>;
+		sample-rate = <16000>;
+	};
+};

Devices/cyd-2432s022c/device.properties

@@ -0,0 +1,16 @@
+general.vendor=CYD
+general.name=2432S022C
+
+apps.launcherAppId=tactility.launcher
+
+hardware.target=ESP32
+hardware.flashSize=4MB
+hardware.spiRam=false
+
+storage.userDataLocation=SD
+
+display.size=2.2"
+display.shape=rectangle
+display.dpi=182
+
+lvgl.colorDepth=16

Devices/cyd-2432s022c/module.yaml

@@ -0,0 +1,8 @@
+dependencies:
+  - Platforms/platform-esp32
+  - Drivers/st7789-soft-i8080-module
+  - Drivers/cst816s-module
+  - Drivers/esp32-dac-speaker-module
+  - Drivers/audio-stream-module
+dts: cyd,2432s022c.dts
+dts-only: true

Devices/cyd-2432s024c/CMakeLists.txt

@@ -1,6 +0,0 @@
-file(GLOB_RECURSE SOURCE_FILES source/*.c*)
-
-idf_component_register(
-    SRCS ${SOURCE_FILES}
-    REQUIRES TactilityKernel
-)

Devices/cyd-2432s024c/module.yaml

@@ -3,3 +3,4 @@ dependencies:
   - Drivers/ili9341-module
   - Drivers/cst816s-module
 dts: cyd,2432s024c.dts
+dts-only: true

Devices/cyd-2432s024c/source/module.cpp

@@ -1,14 +0,0 @@
-#include <tactility/module.h>
-
-extern "C" {
-
-Module cyd_2432s024c_module = {
-    .name = "cyd-2432s024c",
-    .start = nullptr,
-    .stop = nullptr,
-    .drivers = nullptr,
-    .symbols = nullptr,
-    .internal = nullptr
-};
-
-}

Devices/cyd-2432s024r/CMakeLists.txt

@@ -1,6 +0,0 @@
-file(GLOB_RECURSE SOURCE_FILES source/*.c*)
-
-idf_component_register(
-    SRCS ${SOURCE_FILES}
-    REQUIRES TactilityKernel
-)

Devices/cyd-2432s024r/module.yaml

@@ -3,3 +3,4 @@ dependencies:
   - Drivers/ili9341-module
   - Drivers/xpt2046-module
 dts: cyd,2432s024r.dts
+dts-only: true

Devices/cyd-2432s024r/source/module.cpp

@@ -1,14 +0,0 @@
-#include <tactility/module.h>
-
-extern "C" {
-
-Module cyd_2432s024r_module = {
-    .name = "cyd-2432s024r",
-    .start = nullptr,
-    .stop = nullptr,
-    .drivers = nullptr,
-    .symbols = nullptr,
-    .internal = nullptr
-};
-
-}

Devices/cyd-2432s028r/CMakeLists.txt

@@ -1,6 +0,0 @@
-file(GLOB_RECURSE SOURCE_FILES source/*.c*)
-
-idf_component_register(
-    SRCS ${SOURCE_FILES}
-    REQUIRES TactilityKernel
-)

Devices/cyd-2432s028r/module.yaml

@@ -3,3 +3,4 @@ dependencies:
   - Drivers/ili9341-module
   - Drivers/xpt2046-softspi-module
 dts: cyd,2432s028r.dts
+dts-only: true

Devices/cyd-2432s028r/source/module.cpp

@@ -1,14 +0,0 @@
-#include <tactility/module.h>
-
-extern "C" {
-
-Module cyd_2432s028r_module = {
-    .name = "cyd-2432s028r",
-    .start = nullptr,
-    .stop = nullptr,
-    .drivers = nullptr,
-    .symbols = nullptr,
-    .internal = nullptr
-};
-
-}

Devices/cyd-2432s028rv3/CMakeLists.txt

@@ -1,6 +0,0 @@
-file(GLOB_RECURSE SOURCE_FILES source/*.c*)
-
-idf_component_register(
-    SRCS ${SOURCE_FILES}
-    REQUIRES TactilityKernel
-)

Devices/cyd-2432s028rv3/module.yaml

@@ -3,3 +3,4 @@ dependencies:
   - Drivers/st7789-module
   - Drivers/xpt2046-softspi-module
 dts: cyd,2432s028rv3.dts
+dts-only: true

Devices/cyd-2432s028rv3/source/module.cpp

@@ -1,14 +0,0 @@
-#include <tactility/module.h>
-
-extern "C" {
-
-Module cyd_2432s028rv3_module = {
-    .name = "cyd-2432s028rv3",
-    .start = nullptr,
-    .stop = nullptr,
-    .drivers = nullptr,
-    .symbols = nullptr,
-    .internal = nullptr
-};
-
-}

Devices/cyd-2432s032c/CMakeLists.txt

@@ -1,6 +0,0 @@
-file(GLOB_RECURSE SOURCE_FILES source/*.c*)
-
-idf_component_register(
-    SRCS ${SOURCE_FILES}
-    REQUIRES TactilityKernel
-)

Devices/cyd-2432s032c/module.yaml

@@ -3,3 +3,4 @@ dependencies:
   - Drivers/ili9341-module
   - Drivers/gt911-module
 dts: cyd,2432s032c.dts
+dts-only: true

Devices/cyd-2432s032c/source/module.cpp

@@ -1,14 +0,0 @@
-#include <tactility/module.h>
-
-extern "C" {
-
-Module cyd_2432s032c_module = {
-    .name = "cyd-2432s032c",
-    .start = nullptr,
-    .stop = nullptr,
-    .drivers = nullptr,
-    .symbols = nullptr,
-    .internal = nullptr
-};
-
-}

Devices/cyd-3248s035c/CMakeLists.txt

@@ -1,6 +0,0 @@
-file(GLOB_RECURSE SOURCE_FILES source/*.c*)
-
-idf_component_register(
-    SRCS ${SOURCE_FILES}
-    REQUIRES TactilityKernel
-)

Devices/cyd-3248s035c/module.yaml

@@ -3,3 +3,4 @@ dependencies:
   - Drivers/st7796-module
   - Drivers/gt911-module
 dts: cyd,3248s035c.dts
+dts-only: true

Devices/cyd-3248s035c/source/module.cpp

@@ -1,14 +0,0 @@
-#include <tactility/module.h>
-
-extern "C" {
-
-Module cyd_3248s035c_module = {
-    .name = "cyd-3248s035c",
-    .start = nullptr,
-    .stop = nullptr,
-    .drivers = nullptr,
-    .symbols = nullptr,
-    .internal = nullptr
-};
-
-}

Devices/cyd-4848s040c/CMakeLists.txt

@@ -1,6 +0,0 @@
-file(GLOB_RECURSE SOURCE_FILES source/*.c*)
-
-idf_component_register(
-    SRCS ${SOURCE_FILES}
-    REQUIRES TactilityKernel
-)

Devices/cyd-4848s040c/module.yaml

@@ -3,3 +3,4 @@ dependencies:
   - Drivers/st7701-module
   - Drivers/gt911-module
 dts: cyd,4848s040c.dts
+dts-only: true

Devices/cyd-4848s040c/source/module.cpp

@@ -1,14 +0,0 @@
-#include <tactility/module.h>
-
-extern "C" {
-
-Module cyd_4848s040c_module = {
-    .name = "cyd-4848s040c",
-    .start = nullptr,
-    .stop = nullptr,
-    .drivers = nullptr,
-    .symbols = nullptr,
-    .internal = nullptr
-};
-
-}

Devices/cyd-8048s043c/CMakeLists.txt

@@ -1,6 +0,0 @@
-file(GLOB_RECURSE SOURCE_FILES source/*.c*)
-
-idf_component_register(
-    SRCS ${SOURCE_FILES}
-    REQUIRES TactilityKernel
-)

Devices/cyd-8048s043c/module.yaml

@@ -3,3 +3,4 @@ dependencies:
   - Drivers/rgb-display-module
   - Drivers/gt911-module
 dts: cyd,8048s043c.dts
+dts-only: true

Devices/cyd-8048s043c/source/module.cpp

@@ -1,14 +0,0 @@
-#include <tactility/module.h>
-
-extern "C" {
-
-Module cyd_8048s043c_module = {
-    .name = "cyd-8048s043c",
-    .start = nullptr,
-    .stop = nullptr,
-    .drivers = nullptr,
-    .symbols = nullptr,
-    .internal = nullptr
-};
-
-}

Devices/cyd-e32r28t/CMakeLists.txt

@@ -1,6 +0,0 @@
-file(GLOB_RECURSE SOURCE_FILES source/*.c*)
-
-idf_component_register(
-    SRCS ${SOURCE_FILES}
-    REQUIRES TactilityKernel
-)

Devices/cyd-e32r28t/module.yaml

@@ -3,3 +3,4 @@ dependencies:
   - Drivers/ili9341-module
   - Drivers/xpt2046-softspi-module
 dts: cyd,e32r28t.dts
+dts-only: true

Devices/cyd-e32r28t/source/module.cpp

@@ -1,14 +0,0 @@
-#include <tactility/module.h>
-
-extern "C" {
-
-Module cyd_e32r28t_module = {
-    .name = "cyd-e32r28t",
-    .start = nullptr,
-    .stop = nullptr,
-    .drivers = nullptr,
-    .symbols = nullptr,
-    .internal = nullptr
-};
-
-}

Devices/cyd-e32r32p/CMakeLists.txt

@@ -1,6 +0,0 @@
-file(GLOB_RECURSE SOURCE_FILES source/*.c*)
-
-idf_component_register(
-    SRCS ${SOURCE_FILES}
-    REQUIRES TactilityKernel
-)

Devices/cyd-e32r32p/module.yaml

@@ -3,3 +3,4 @@ dependencies:
   - Drivers/st7789-module
   - Drivers/xpt2046-module
 dts: cyd,e32r32p.dts
+dts-only: true

Devices/cyd-e32r32p/source/module.cpp

@@ -1,14 +0,0 @@
-#include <tactility/module.h>
-
-extern "C" {
-
-Module cyd_e32r32p_module = {
-    .name = "cyd-e32r32p",
-    .start = nullptr,
-    .stop = nullptr,
-    .drivers = nullptr,
-    .symbols = nullptr,
-    .internal = nullptr
-};
-
-}

Devices/elecrow-crowpanel-advance-28/CMakeLists.txt

@@ -1,6 +0,0 @@
-file(GLOB_RECURSE SOURCE_FILES source/*.c*)
-
-idf_component_register(
-    SRCS ${SOURCE_FILES}
-    REQUIRES TactilityKernel
-)

Devices/elecrow-crowpanel-advance-28/module.yaml

@@ -3,3 +3,4 @@ dependencies:
   - Drivers/st7789-module
   - Drivers/ft5x06-module
 dts: elecrow,crowpanel-advance-28.dts
+dts-only: true

Devices/elecrow-crowpanel-advance-28/source/module.cpp

@@ -1,14 +0,0 @@
-#include <tactility/module.h>
-
-extern "C" {
-
-Module elecrow_crowpanel_advance_28_module = {
-    .name = "elecrow-crowpanel-advance-28",
-    .start = nullptr,
-    .stop = nullptr,
-    .drivers = nullptr,
-    .symbols = nullptr,
-    .internal = nullptr
-};
-
-}

Devices/elecrow-crowpanel-advance-35/CMakeLists.txt

@@ -1,6 +0,0 @@
-file(GLOB_RECURSE SOURCE_FILES source/*.c*)
-
-idf_component_register(
-    SRCS ${SOURCE_FILES}
-    REQUIRES TactilityKernel
-)

Devices/elecrow-crowpanel-advance-35/module.yaml

@@ -3,3 +3,4 @@ dependencies:
   - Drivers/ili9488-module
   - Drivers/gt911-module
 dts: elecrow,crowpanel-advance-35.dts
+dts-only: true

Devices/elecrow-crowpanel-advance-35/source/module.cpp

@@ -1,14 +0,0 @@
-#include <tactility/module.h>
-
-extern "C" {
-
-Module elecrow_crowpanel_advance_35_module = {
-    .name = "elecrow-crowpanel-advance-35",
-    .start = nullptr,
-    .stop = nullptr,
-    .drivers = nullptr,
-    .symbols = nullptr,
-    .internal = nullptr
-};
-
-}

Devices/elecrow-crowpanel-advance-50/CMakeLists.txt

@@ -1,7 +0,0 @@
-file(GLOB_RECURSE SOURCE_FILES source/*.c*)
-
-idf_component_register(
-    SRCS ${SOURCE_FILES}
-    INCLUDE_DIRS "source"
-    REQUIRES TactilityKernel
-)

Devices/elecrow-crowpanel-advance-50/module.yaml

@@ -4,3 +4,4 @@ dependencies:
   - Drivers/gt911-module
   - Drivers/tca9534-module
 dts: elecrow,crowpanel-advance-50.dts
+dts-only: true

Devices/elecrow-crowpanel-advance-50/source/module.cpp

@@ -1,14 +0,0 @@
-#include <tactility/module.h>
-
-extern "C" {
-
-Module elecrow_crowpanel_advance_50_module = {
-    .name = "elecrow-crowpanel-advance-50",
-    .start = nullptr,
-    .stop = nullptr,
-    .drivers = nullptr,
-    .symbols = nullptr,
-    .internal = nullptr
-};
-
-}

Devices/elecrow-crowpanel-basic-28/CMakeLists.txt

@@ -1,6 +0,0 @@
-file(GLOB_RECURSE SOURCE_FILES source/*.c*)
-
-idf_component_register(
-    SRCS ${SOURCE_FILES}
-    REQUIRES TactilityKernel
-)

Devices/elecrow-crowpanel-basic-28/module.yaml

@@ -3,3 +3,4 @@ dependencies:
   - Drivers/ili9341-module
   - Drivers/xpt2046-module
 dts: elecrow,crowpanel-basic-28.dts
+dts-only: true

Devices/elecrow-crowpanel-basic-28/source/module.cpp

@@ -1,14 +0,0 @@
-#include <tactility/module.h>
-
-extern "C" {
-
-Module elecrow_crowpanel_basic_28_module = {
-    .name = "elecrow-crowpanel-basic-28",
-    .start = nullptr,
-    .stop = nullptr,
-    .drivers = nullptr,
-    .symbols = nullptr,
-    .internal = nullptr
-};
-
-}

Devices/elecrow-crowpanel-basic-35/CMakeLists.txt

@@ -1,6 +0,0 @@
-file(GLOB_RECURSE SOURCE_FILES source/*.c*)
-
-idf_component_register(
-    SRCS ${SOURCE_FILES}
-    REQUIRES TactilityKernel
-)

Devices/elecrow-crowpanel-basic-35/module.yaml

@@ -3,3 +3,4 @@ dependencies:
   - Drivers/ili9488-module
   - Drivers/xpt2046-module
 dts: elecrow,crowpanel-basic-35.dts
+dts-only: true

Devices/elecrow-crowpanel-basic-35/source/module.cpp

@@ -1,14 +0,0 @@
-#include <tactility/module.h>
-
-extern "C" {
-
-Module elecrow_crowpanel_basic_35_module = {
-    .name = "elecrow-crowpanel-basic-35",
-    .start = nullptr,
-    .stop = nullptr,
-    .drivers = nullptr,
-    .symbols = nullptr,
-    .internal = nullptr
-};
-
-}

Devices/elecrow-crowpanel-basic-50/CMakeLists.txt

@@ -1,7 +0,0 @@
-file(GLOB_RECURSE SOURCE_FILES source/*.c*)
-
-idf_component_register(
-    SRCS ${SOURCE_FILES}
-    INCLUDE_DIRS "source"
-    REQUIRES TactilityKernel
-)

Devices/elecrow-crowpanel-basic-50/module.yaml

@@ -3,3 +3,4 @@ dependencies:
   - Drivers/rgb-display-module
   - Drivers/gt911-module
 dts: elecrow,crowpanel-basic-50.dts
+dts-only: true

Devices/elecrow-crowpanel-basic-50/source/module.cpp

@@ -1,14 +0,0 @@
-#include <tactility/module.h>
-
-extern "C" {
-
-Module elecrow_crowpanel_basic_50_module = {
-    .name = "elecrow-crowpanel-basic-50",
-    .start = nullptr,
-    .stop = nullptr,
-    .drivers = nullptr,
-    .symbols = nullptr,
-    .internal = nullptr
-};
-
-}

Devices/es3c28p/CMakeLists.txt

@@ -1,4 +0,0 @@
-idf_component_register(
-    SRCS "source/module.cpp"
-    REQUIRES TactilityKernel
-)

Devices/es3c28p/module.yaml

@@ -5,3 +5,4 @@ dependencies:
   - Drivers/es8311-module
   - Drivers/audio-stream-module
 dts: es3c28p.dts
+dts-only: true

Devices/es3c28p/source/module.cpp

@@ -1,14 +0,0 @@
-#include <tactility/module.h>
-
-extern "C" {
-
-Module es3c28p_module = {
-    .name = "es3c28p",
-    .start = nullptr,
-    .stop = nullptr,
-    .drivers = nullptr,
-    .symbols = nullptr,
-    .internal = nullptr
-};
-
-}

Devices/generic-esp32/CMakeLists.txt

@@ -1,6 +0,0 @@
-file(GLOB_RECURSE SOURCE_FILES source/*.c*)
-
-idf_component_register(
-    SRCS ${SOURCE_FILES}
-    REQUIRES TactilityKernel
-)

Devices/generic-esp32/module.yaml

@@ -1,3 +1,4 @@
 dependencies:
   - Platforms/platform-esp32
 dts: generic,esp32.dts
+dts-only: true

Devices/generic-esp32/source/module.cpp

@@ -1,14 +0,0 @@
-#include <tactility/module.h>
-
-extern "C" {
-
-Module generic_esp32_module = {
-    .name = "generic-esp32",
-    .start = nullptr,
-    .stop = nullptr,
-    .drivers = nullptr,
-    .symbols = nullptr,
-    .internal = nullptr
-};
-
-}

Devices/generic-esp32c6/CMakeLists.txt

@@ -1,6 +0,0 @@
-file(GLOB_RECURSE SOURCE_FILES source/*.c*)
-
-idf_component_register(
-    SRCS ${SOURCE_FILES}
-    REQUIRES TactilityKernel
-)

Devices/generic-esp32c6/module.yaml

@@ -1,3 +1,4 @@
 dependencies:
   - Platforms/platform-esp32
 dts: generic,esp32c6.dts
+dts-only: true

Devices/generic-esp32c6/source/module.cpp

@@ -1,14 +0,0 @@
-#include <tactility/module.h>
-
-extern "C" {
-
-Module generic_esp32c6_module = {
-    .name = "generic-esp32c6",
-    .start = nullptr,
-    .stop = nullptr,
-    .drivers = nullptr,
-    .symbols = nullptr,
-    .internal = nullptr
-};
-
-}

Devices/generic-esp32p4/CMakeLists.txt

@@ -1,6 +0,0 @@
-file(GLOB_RECURSE SOURCE_FILES source/*.c*)
-
-idf_component_register(
-    SRCS ${SOURCE_FILES}
-    REQUIRES TactilityKernel
-)

Devices/generic-esp32p4/module.yaml

@@ -1,3 +1,4 @@
 dependencies:
   - Platforms/platform-esp32
 dts: generic,esp32p4.dts
+dts-only: true

Devices/generic-esp32p4/source/module.cpp

@@ -1,14 +0,0 @@
-#include <tactility/module.h>
-
-extern "C" {
-
-Module generic_esp32p4_module = {
-    .name = "generic-esp32p4",
-    .start = nullptr,
-    .stop = nullptr,
-    .drivers = nullptr,
-    .symbols = nullptr,
-    .internal = nullptr
-};
-
-}

Devices/generic-esp32s3/CMakeLists.txt

@@ -1,6 +0,0 @@
-file(GLOB_RECURSE SOURCE_FILES source/*.c*)
-
-idf_component_register(
-    SRCS ${SOURCE_FILES}
-    REQUIRES TactilityKernel
-)

Devices/generic-esp32s3/module.yaml

@@ -1,3 +1,4 @@
 dependencies:
   - Platforms/platform-esp32
 dts: generic,esp32s3.dts
+dts-only: true

Devices/generic-esp32s3/source/module.cpp

@@ -1,14 +0,0 @@
-#include <tactility/module.h>
-
-extern "C" {
-
-Module generic_esp32s3_module = {
-    .name = "generic-esp32s3",
-    .start = nullptr,
-    .stop = nullptr,
-    .drivers = nullptr,
-    .symbols = nullptr,
-    .internal = nullptr
-};
-
-}

Devices/guition-jc1060p470ciwy/CMakeLists.txt

@@ -1,6 +0,0 @@
-file(GLOB_RECURSE SOURCE_FILES source/*.c*)
-
-idf_component_register(
-    SRCS ${SOURCE_FILES}
-    REQUIRES TactilityKernel
-)

Devices/guition-jc1060p470ciwy/module.yaml

@@ -3,3 +3,4 @@ dependencies:
   - Drivers/jd9165-module
   - Drivers/gt911-module
 dts: guition,jc1060p470ciwy.dts
+dts-only: true

Devices/guition-jc1060p470ciwy/source/module.cpp

@@ -1,14 +0,0 @@
-#include <tactility/module.h>
-
-extern "C" {
-
-Module guition_jc1060p470ciwy_module = {
-    .name = "guition-jc1060p470ciwy",
-    .start = nullptr,
-    .stop = nullptr,
-    .drivers = nullptr,
-    .symbols = nullptr,
-    .internal = nullptr
-};
-
-}

Devices/guition-jc2432w328c/CMakeLists.txt

@@ -1,6 +0,0 @@
-file(GLOB_RECURSE SOURCE_FILES source/*.c*)
-
-idf_component_register(
-    SRCS ${SOURCE_FILES}
-    REQUIRES TactilityKernel
-)

Devices/guition-jc2432w328c/module.yaml

@@ -3,3 +3,4 @@ dependencies:
   - Drivers/st7789-module
   - Drivers/cst816s-module
 dts: guition,jc2432w328c.dts
+dts-only: true

Devices/guition-jc2432w328c/source/module.cpp

@@ -1,14 +0,0 @@
-#include <tactility/module.h>
-
-extern "C" {
-
-Module guition_jc2432w328c_module = {
-    .name = "guition-jc2432w328c",
-    .start = nullptr,
-    .stop = nullptr,
-    .drivers = nullptr,
-    .symbols = nullptr,
-    .internal = nullptr
-};
-
-}

Devices/guition-jc8048w550c/CMakeLists.txt

@@ -1,6 +0,0 @@
-file(GLOB_RECURSE SOURCE_FILES source/*.c*)
-
-idf_component_register(
-    SRCS ${SOURCE_FILES}
-    REQUIRES TactilityKernel
-)

Devices/guition-jc8048w550c/module.yaml

@@ -5,3 +5,4 @@ dependencies:
   - Drivers/rgb-display-module
   - Drivers/gt911-module
 dts: guition,jc8048w550c.dts
+dts-only: true

Devices/guition-jc8048w550c/source/module.cpp

@@ -1,14 +0,0 @@
-#include <tactility/module.h>
-
-extern "C" {
-
-Module guition_jc8048w550c_module = {
-    .name = "guition-jc8048w550c",
-    .start = nullptr,
-    .stop = nullptr,
-    .drivers = nullptr,
-    .symbols = nullptr,
-    .internal = nullptr
-};
-
-}

Devices/heltec-wifi-lora-32-v3/CMakeLists.txt

@@ -1,6 +0,0 @@
-file(GLOB_RECURSE SOURCE_FILES source/*.c*)
-
-idf_component_register(
-    SRCS ${SOURCE_FILES}
-    REQUIRES TactilityKernel
-)

Devices/heltec-wifi-lora-32-v3/module.yaml

@@ -3,3 +3,4 @@ dependencies:
   - Drivers/ssd1306-module
   - Drivers/button-control-module
 dts: heltec,wifi-lora-32-v3.dts
+dts-only: true

Devices/heltec-wifi-lora-32-v3/source/module.cpp

@@ -1,14 +0,0 @@
-#include <tactility/module.h>
-
-extern "C" {
-
-Module heltec_wifi_lora_32_v3_module = {
-    .name = "heltec-wifi-lora-32-v3",
-    .start = nullptr,
-    .stop = nullptr,
-    .drivers = nullptr,
-    .symbols = nullptr,
-    .internal = nullptr
-};
-
-}

Devices/lilygo-tdeck-max/CMakeLists.txt

@@ -1,7 +0,0 @@
-file(GLOB_RECURSE SOURCE_FILES source/*.c*)
-
-idf_component_register(
-    SRCS ${SOURCE_FILES}
-    INCLUDE_DIRS "source"
-    REQUIRES TactilityKernel
-)

Devices/lilygo-tdeck-max/module.yaml

@@ -10,3 +10,4 @@ dependencies:
   - Drivers/drv2605-module
   - Drivers/gps-generic-module
 dts: lilygo,tdeck-max.dts
+dts-only: true

Devices/lilygo-tdeck-max/source/module.cpp

@@ -1,14 +0,0 @@
-#include <tactility/module.h>
-
-extern "C" {
-
-Module lilygo_tdeck_max_module = {
-    .name = "lilygo-tdeck-max",
-    .start = nullptr,
-    .stop = nullptr,
-    .drivers = nullptr,
-    .symbols = nullptr,
-    .internal = nullptr
-};
-
-}

Devices/lilygo-tdisplay/CMakeLists.txt

@@ -1,6 +0,0 @@
-file(GLOB_RECURSE SOURCE_FILES source/*.c*)
-
-idf_component_register(
-    SRCS ${SOURCE_FILES}
-    REQUIRES TactilityKernel
-)

Devices/lilygo-tdisplay/module.yaml

@@ -3,3 +3,4 @@ dependencies:
   - Drivers/st7789-module
   - Drivers/button-control-module
 dts: lilygo,tdisplay.dts
+dts-only: true