- Added modular device support and devicetree bindings for ILI9341, ILI9488, CST816S, XPT2046, and GPIO button input, updating several board configurations for display/touch/backlight/keyboard/battery.
- Added a setting to control deprecated HAL usage (device property + Kconfig).
- Added kernel base drivers for: display, pointer (touch, mouse, etc.), keyboard, adc, power supply and backlight
- Implement new kernel driver modules: `st7789-module` and `gt911-module`
- Implement ESP32 ADC "oneshot" kernel driver
- Implement ESP32 backlight kernel driver with ledc API
- Implemented `battery-sense` driver that allows for voltage measurement and creates a power supply child device
- Updated github actions
- Updated flash scripts
- Fix for esp32 legacy driver conflict with ADC
- Created separate `lilygo-tdeck` and `lilygo-tdeck-plus` devices
- Created `lilygo-module` with LilyGO kernel drivers
- Fix for intermittent errors in build related to code generation of `devicetree.c`
- `lvgl-module` can now map kernel drivers onto LVGL devices
- Created `KernelDisplayApp` as a mirror of `HalDisplayApp` (formerly `DisplayApp`)
- Removed `struct` and `enum` prefix in a lot of kernel driver cpp source files
- `lilygo-tdeck` and `lilygo-tdeck-plus` are now fully relying on kernel drivers and don't use any of the old HAL
* Tab5 camera + other stuff
Tab5 camera driver - SC2356
Custom SliderBox widget - slider with plus and minus buttons + value label and snapping
Rtc Time service + rtc api
Sdk release - only include drivers built for that specific target, eg: sc2356 driver is mipi / p4 only.
No more hardcoded manual sdk cmakelists
New function to find device by compatible string match. no more static cast bool wildness when trying to match a single device (like M5Stack PaperS3 for example)
* feedback + fixes
Fixed external app user data path.
fix(gui): block app teardown until onHide() completes, preventing ELF unload racing a still-running app
added camera device type and api
* drain the snake sssem
---------
Co-authored-by: Ken Van Hoeylandt <git@kenvanhoeylandt.net>
- Fixed crash when returning to Setup app (from any of the steps)
- Fixed crash when returning to TimeDateSettings app (after locale selection)
- Fixed GuiService inconsistent behaviour: now always perform operations async (e.g. to show/hide apps). This fixes crashes in some onHide() calls where onHide() might be called before onShow() was called.
- Fix for incorrect WebServService path
- Remove CYD-4848S040C SD card functionality, but added a GPIO fix for releasing 3-wire SPI pin sharing.
- Fix for saving/loading settings for various apps
- Disable BlueTooth driver by default, to ensure it doesn't allocate memory
- Update BlueTooth settings app behaviour to make sure it starts/stops the devices
- Disable SPI RAM usage for ST7789 as it broke App Hub
- Reduce T-Display and T-Deck display buffers from 1/3rd to 1/10th of resolution
- Enabled dynamic buffers for MbedTLS to optimize memory
- TLS 1.3 did not work with dynamic buffers: downgrade to 1.2 for now
- WiFi is now enabled from the Boot app callback to the WiFi service, instead of the WiFi service start() function. This avoids a lockup when WiFi is started by the service while the Boot app is updating the WiFi settings.
- New drivers:
- SD SPI
- spi_peripheral
- touch_placeholder
- display_placeholder
- Devicetree compiler:
- Implement phandle-arrays
- Implement device addresses
- Add placeholder drivers to all devices with a SPI display
- SPI driver: add `cs-pins` and set them to high on driver start
- FileSystem: add `file_system_set_owner()` and `file_system_get_owner()`
- File locking is now checking if the related `FileSystem` is part of a shared SPI bus
- Add `device_get_child_count()`
- SDMMC driver: Remove default of `slot` value
- Fix for Crowpanel Basic 3.5" display (add delay to booting)
- Fix for LilyGO T-HMI SD card mounting (delayed mounting by disabling it initially in the dts)
The FT6 driver does a hardware ID check, which fails on the CoreS3 but
not on Stackchan for some reason. FT5 works on Stackchan, so we'll use
that for all devices, just like M5GFX does.
* Bluetooth LE addition
* fixes
* use the psram!
helps a little on S3 (t-deck)
* custom device name
* Update symbols.c
* Feedback + fixes
Fixes external app start/stop server (child devices)
Fixes BtManage causing a full system hang upon disabling bt when a device is connected to the host.
* updoot
* more updoot
* move back!
* Revert "move back!"
This reverts commit d3694365c634acc5db62ac59771c496cb971a727.
* fix some of the things
* Addressing feedback? hmm
* Fixes
Bug 1 — Reconnect loop / Reconnect not working fixed
Bug 2 — Name-only advertising overwrites HID advertising
Bug 3 — BleHidDeviceCtx leak on re-enable
Enhancement — HID device auto-start on radio re-enable
* stuff...
* update for consistency with others
* fix crashes
and some bonus symbols
* a few symbols, i2c speed, cdn message
100kHz i2c speed seems to be more compatible with m5stack modules...and probably in general.
cdn message no longer applies
* Hide BT Settings when bt not enabled
* Addressing things and device fixes
* Missed one!
* stuff
* Optional internal pull-ups for SD/MMC pins in DTS
* Selectable on‑chip LDO channel for SD/MMC power (can be disabled)
* Added several sensor/driver modules to generic ESP32 device configurations so that they become part of the SDKs
* SD card mount now prints card information for clearer diagnostics
* Fix for bug DTS boolean parsing. Improved tests to catch these issues.
* Expanded SDK integration test to include new modules and headers
* Modularized packaging to generate per‑module build files and include driver assets
Font size set to 18 for 800x480 displays
Fix web server dashboard not rendering when sdcard isn't present
Added new driver modules
- BM8563 RTC
- RX8130CE RTC
- MPU6886 IMU
- QMI8658 IMU
- M5PM1 Power Management Chip
Applied the above modules to applicable devicetrees.
Added new device: M5Stack StickS3
Added new M5Stack Tab5 St7123 variant.
ButtonControl changed to use interupts and xQueue, added AppClose action.
And some bonus symbols of course, the apps are hungry for symbols.
- UiDensity moved to lvgl-module
- Deleted tt_hal and tt_hal_gpio (breaks apps, but will fix those right after merging)
- Added I2C 8 bit register operations
- Added device.properties to simulator
- Improved Tab5 hardware init, implement audio
- Add README.md to kernel
