M5Stack Tab5 support (#449)

* **New Features**
  * Added support for M5Stack Tab5: integrated display (ILI9881C MIPI-DSI), touch, and SD card.

* **User Interface**
  * Changed toolbar label from "External Apps" to "Installed Apps."

* **Improvements**
  * Clarified boot log messages ("Init boot"/"Init boot failed") for better diagnostics.
  * Firmware build matrix and configuration updated to include the M5Stack Tab5 target.

.github/workflows/build.yml

@@ -62,6 +62,7 @@ jobs:
           { id: m5stack-cores3, arch: esp32s3 },
           { id: m5stack-stickc-plus, arch: esp32 },
           { id: m5stack-stickc-plus2, arch: esp32 },
+          { id: m5stack-tab5, arch: esp32p4 },
           { id: unphone, arch: esp32s3 },
           { id: waveshare-esp32-s3-geek, arch: esp32s3 },
           { id: waveshare-s3-lcd-13, arch: esp32s3 },

Devices/guition-jc1060p470ciwy/Source/devices/Display.cpp

@@ -61,5 +61,5 @@ std::shared_ptr<tt::hal::display::DisplayDevice> createDisplay() {
     });
 
     const auto display = std::make_shared<Jd9165Display>(configuration);
-    return std::reinterpret_pointer_cast<tt::hal::display::DisplayDevice>(display);
+    return std::static_pointer_cast<tt::hal::display::DisplayDevice>(display);
 }

Devices/guition-jc1060p470ciwy/device.properties

@@ -1,6 +1,6 @@
 [general]
 vendor=Guition
-name=JC1060P470CIWY
+name=JC1060P470C-I-W-Y
 
 [hardware]
 target=ESP32P4

Devices/m5stack-tab5/CMakeLists.txt

@@ -0,0 +1,7 @@
+file(GLOB_RECURSE SOURCE_FILES Source/*.c*)
+
+idf_component_register(
+    SRCS ${SOURCE_FILES}
+    INCLUDE_DIRS "Source"
+    REQUIRES Tactility esp_lvgl_port esp_lcd EspLcdCompat esp_lcd_ili9881c GT911 PwmBacklight driver vfs fatfs
+)

Devices/m5stack-tab5/Source/Configuration.cpp

@@ -0,0 +1,152 @@
+#include "devices/Display.h"
+#include "devices/SdCard.h"
+
+#include <Tactility/hal/Configuration.h>
+
+using namespace tt::hal;
+
+static const auto LOGGER = tt::Logger("Tab5");
+
+static DeviceVector createDevices() {
+    return {
+        createDisplay(),
+        createSdCard(),
+    };
+}
+
+static bool initBoot() {
+    /*
+     PI4IOE5V6408-1 (0x43)
+     - Bit 0: RF internal/external switch
+     - Bit 1: Speaker enable
+     - Bit 2: External 5V bus enable
+     - Bit 3: /
+     - Bit 4: LCD reset
+     - Bit 5: Touch reset
+     - Bit 6: Camera reset
+     - Bit 7: Headphone detect
+
+     PI4IOE5V6408-2 (0x44)
+     - Bit 0: C6 WLAN enable
+     - Bit 1: /
+     - Bit 2: /
+     - Bit 3: USB-A 5V enable
+     - Bit 4: Device power: PWROFF_PLUSE
+     - Bit 5: IP2326: nCHG_QC_EN
+     - Bit 6: IP2326: CHG_STAT_LED
+     - Bit 7: IP2326: CHG_EN
+    */
+
+    // Init byte arrays adapted from https://github.com/m5stack/M5GFX/blob/03565ccc96cb0b73c8b157f5ec3fbde439b034ad/src/M5GFX.cpp
+    static constexpr uint8_t reg_data_io1_1[] = {
+        0x03, 0b01111111,   // PI4IO_REG_IO_DIR
+        0x05, 0b01000110,   // PI4IO_REG_OUT_SET (bit4=LCD Reset, bit5=GT911 TouchReset -> LOW)
+        0x07, 0b00000000,   // PI4IO_REG_OUT_H_IM
+        0x0D, 0b01111111,   // PI4IO_REG_PULL_SEL
+        0x0B, 0b01111111,   // PI4IO_REG_PULL_EN
+    };
+
+    static constexpr uint8_t reg_data_io1_2[] = {
+        0x05, 0b01110110,   // PI4IO_REG_OUT_SET (bit4=LCD Reset, bit5=GT911 TouchReset -> HIGH)
+    };
+
+    static constexpr uint8_t reg_data_io2[] = {
+        0x03, 0b10111001,   // PI4IO_REG_IO_DIR
+        0x07, 0b00000110,   // PI4IO_REG_OUT_H_IM
+        0x0D, 0b10111001,   // PI4IO_REG_PULL_SEL
+        0x0B, 0b11111001,   // PI4IO_REG_PULL_EN
+        0x09, 0b01000000,   // PI4IO_REG_IN_DEF_STA
+        0x11, 0b10111111,   // PI4IO_REG_INT_MASK
+        0x05, 0b10001001,   // PI4IO_REG_OUT_SET (enable WiFi, USB-A 5V and CHG_EN)
+    };
+
+    constexpr auto IO_EXPANDER1_ADDRESS = 0x43;
+    if (!i2c::masterWriteRegisterArray(I2C_NUM_0, IO_EXPANDER1_ADDRESS, reg_data_io1_1, sizeof(reg_data_io1_1))) {
+        LOGGER.error("IO expander 1 init failed in phase 1");
+        return false;
+    }
+
+    constexpr auto IO_EXPANDER2_ADDRESS = 0x44;
+    if (!i2c::masterWriteRegisterArray(I2C_NUM_0, IO_EXPANDER2_ADDRESS, reg_data_io2, sizeof(reg_data_io2))) {
+        LOGGER.error("IO expander 2 init failed");
+        return false;
+    }
+
+    // The M5Stack code applies this, but it's not known why
+    // TODO: Remove and test it extensively
+    tt::kernel::delayTicks(10);
+
+    if (!i2c::masterWriteRegisterArray(I2C_NUM_0, IO_EXPANDER1_ADDRESS, reg_data_io1_2, sizeof(reg_data_io1_2))) {
+        LOGGER.error("IO expander 1 init failed in phase 2");
+        return false;
+    }
+
+    return true;
+}
+
+extern const Configuration hardwareConfiguration = {
+    .initBoot = initBoot,
+    .createDevices = createDevices,
+    .i2c = {
+        i2c::Configuration {
+            .name = "Internal",
+            .port = I2C_NUM_0,
+            .initMode = i2c::InitMode::ByTactility,
+            .isMutable = false,
+            .config = (i2c_config_t) {
+                .mode = I2C_MODE_MASTER,
+                .sda_io_num = GPIO_NUM_31,
+                .scl_io_num = GPIO_NUM_32,
+                .sda_pullup_en = true,
+                .scl_pullup_en = true,
+                .master = {
+                    .clk_speed = 400000
+                },
+                .clk_flags = 0
+            }
+        },
+        i2c::Configuration {
+            .name = "Port A",
+            .port = I2C_NUM_1,
+            .initMode = i2c::InitMode::ByTactility,
+            .isMutable = false,
+            .config = (i2c_config_t) {
+                .mode = I2C_MODE_MASTER,
+                .sda_io_num = GPIO_NUM_53,
+                .scl_io_num = GPIO_NUM_54,
+                .sda_pullup_en = true,
+                .scl_pullup_en = true,
+                .master = {
+                    .clk_speed = 400000
+                },
+                .clk_flags = 0
+            }
+        }
+    },
+    .spi = {
+        // SDCard
+        spi::Configuration {
+            .device = SPI3_HOST,
+            .dma = SPI_DMA_CH_AUTO,
+            .config = {
+                .mosi_io_num = GPIO_NUM_44,
+                .miso_io_num = GPIO_NUM_39,
+                .sclk_io_num = GPIO_NUM_43,
+                .quadwp_io_num = GPIO_NUM_NC,
+                .quadhd_io_num = GPIO_NUM_NC,
+                .data4_io_num = GPIO_NUM_NC,
+                .data5_io_num = GPIO_NUM_NC,
+                .data6_io_num = GPIO_NUM_NC,
+                .data7_io_num = GPIO_NUM_NC,
+                .data_io_default_level = false,
+                .max_transfer_sz = 0,
+                .flags = 0,
+                .isr_cpu_id = ESP_INTR_CPU_AFFINITY_AUTO,
+                .intr_flags = 0
+            },
+            .initMode = spi::InitMode::ByTactility,
+            .isMutable = false,
+            .lock = nullptr
+        }
+    }
+};

Devices/m5stack-tab5/Source/Drivers.cpp

@@ -0,0 +1,7 @@
+extern "C" {
+
+extern void register_device_drivers() {
+    /* NO-OP */
+}
+
+}

Devices/m5stack-tab5/Source/devices/Display.cpp

@@ -0,0 +1,64 @@
+#include "Display.h"
+#include "Ili9881cDisplay.h"
+
+#include <Gt911Touch.h>
+#include <PwmBacklight.h>
+#include <Tactility/Logger.h>
+#include <Tactility/Mutex.h>
+#include <Tactility/hal/gpio/Gpio.h>
+
+constexpr auto LCD_PIN_RESET = GPIO_NUM_0;  // Match P4 EV board reset line
+constexpr auto LCD_PIN_BACKLIGHT = GPIO_NUM_22;
+
+static std::shared_ptr<tt::hal::touch::TouchDevice> createTouch() {
+    auto configuration = std::make_unique<Gt911Touch::Configuration>(
+        I2C_NUM_0,
+        720,
+        1280,
+        false,  // swapXY
+        false,  // mirrorX
+        false,  // mirrorY
+        GPIO_NUM_NC, // reset pin
+        GPIO_NUM_NC // "GPIO_NUM_23 cannot be used due to resistor to 3V3" https://github.com/espressif/esp-bsp/blob/ad668c765cbad177495a122181df0a70ff9f8f61/bsp/m5stack_tab5/src/m5stack_tab5.c#L76234
+    );
+
+    return std::make_shared<Gt911Touch>(std::move(configuration));
+}
+
+std::shared_ptr<tt::hal::display::DisplayDevice> createDisplay() {
+    // Initialize PWM backlight
+    if (!driver::pwmbacklight::init(LCD_PIN_BACKLIGHT, 5000, LEDC_TIMER_1, LEDC_CHANNEL_0)) {
+        tt::Logger("Tab5").warn("Failed to initialize backlight");
+    }
+
+    auto touch = createTouch();
+
+    // Work-around to init touch : interrupt pin must be set to low
+    // Note: There is a resistor to 3V3 on interrupt pin which is blocking GT911 touch
+    // See https://github.com/espressif/esp-bsp/blob/ad668c765cbad177495a122181df0a70ff9f8f61/bsp/m5stack_tab5/src/m5stack_tab5.c#L777
+    tt::hal::gpio::configure(23, tt::hal::gpio::Mode::Output, true, false);
+    tt::hal::gpio::setLevel(23, false);
+
+    auto configuration = std::make_shared<EspLcdConfiguration>(EspLcdConfiguration {
+        .horizontalResolution = 720,
+        .verticalResolution = 1280,
+        .gapX = 0,
+        .gapY = 0,
+        .monochrome = false,
+        .swapXY = false,
+        .mirrorX = false,
+        .mirrorY = false,
+        .invertColor = false,
+        .bufferSize = 0, // 0 = default (1/10 of screen)
+        .touch = touch,
+        .backlightDutyFunction = driver::pwmbacklight::setBacklightDuty,
+        .resetPin = LCD_PIN_RESET,
+        .lvglColorFormat = LV_COLOR_FORMAT_RGB565,
+        .lvglSwapBytes = false,
+        .rgbElementOrder = LCD_RGB_ELEMENT_ORDER_RGB,
+        .bitsPerPixel = 16
+    });
+
+    const auto display = std::make_shared<Ili9881cDisplay>(configuration);
+    return std::static_pointer_cast<tt::hal::display::DisplayDevice>(display);
+}

Devices/m5stack-tab5/Source/devices/Display.h

@@ -0,0 +1,6 @@
+#pragma once
+
+#include <Tactility/hal/display/DisplayDevice.h>
+#include <memory>
+
+std::shared_ptr<tt::hal::display::DisplayDevice> createDisplay();

Devices/m5stack-tab5/Source/devices/Ili9881cDisplay.cpp

@@ -0,0 +1,148 @@
+#include "Ili9881cDisplay.h"
+#include "disp_init_data.h"
+
+#include <Tactility/Logger.h>
+#include <esp_lcd_ili9881c.h>
+
+static const auto LOGGER = tt::Logger("ILI9881C");
+
+Ili9881cDisplay::~Ili9881cDisplay() {
+    // TODO: This should happen during ::stop(), but this isn't currently exposed
+    if (mipiDsiBus != nullptr) {
+        esp_lcd_del_dsi_bus(mipiDsiBus);
+        mipiDsiBus = nullptr;
+    }
+    if (ldoChannel != nullptr) {
+        esp_ldo_release_channel(ldoChannel);
+        ldoChannel = nullptr;
+    }
+}
+
+bool Ili9881cDisplay::createMipiDsiBus() {
+    esp_ldo_channel_config_t ldo_mipi_phy_config = {
+        .chan_id = 3,
+        .voltage_mv = 2500,
+        .flags = {
+            .adjustable = 0,
+            .owned_by_hw = 0,
+            .bypass = 0
+        }
+    };
+    
+    if (esp_ldo_acquire_channel(&ldo_mipi_phy_config, &ldoChannel) != ESP_OK) {
+        LOGGER.error("Failed to acquire LDO channel for MIPI DSI PHY");
+        return false;
+    }
+    
+    LOGGER.info("Powered on");
+
+    // Create bus
+    // TODO: use MIPI_DSI_PHY_CLK_SRC_DEFAULT() in future ESP-IDF 6.0.0 update with esp_lcd_jd9165 library version 2.x
+    const esp_lcd_dsi_bus_config_t bus_config = {
+        .bus_id = 0,
+        .num_data_lanes = 2,
+        .phy_clk_src = MIPI_DSI_PHY_CLK_SRC_DEFAULT,
+        .lane_bit_rate_mbps = 1000
+    };
+
+    if (esp_lcd_new_dsi_bus(&bus_config, &mipiDsiBus) != ESP_OK) {
+        LOGGER.error("Failed to create bus");
+        return false;
+    }
+
+    LOGGER.info("Bus created");
+    return true;
+}
+
+bool Ili9881cDisplay::createIoHandle(esp_lcd_panel_io_handle_t& ioHandle) {
+    // Initialize MIPI DSI bus if not already done
+    if (mipiDsiBus == nullptr) {
+        if (!createMipiDsiBus()) {
+            return false;
+        }
+    }
+
+    // Use DBI interface to send LCD commands and parameters
+    esp_lcd_dbi_io_config_t dbi_config = ILI9881C_PANEL_IO_DBI_CONFIG();
+
+    if (esp_lcd_new_panel_io_dbi(mipiDsiBus, &dbi_config, &ioHandle) != ESP_OK) {
+        LOGGER.error("Failed to create panel IO");
+        return false;
+    }
+
+    return true;
+}
+
+esp_lcd_panel_dev_config_t Ili9881cDisplay::createPanelConfig(std::shared_ptr<EspLcdConfiguration> espLcdConfiguration, gpio_num_t resetPin) {
+    return {
+        .reset_gpio_num = resetPin,
+        .rgb_ele_order = espLcdConfiguration->rgbElementOrder,
+        .data_endian = LCD_RGB_DATA_ENDIAN_LITTLE,
+        .bits_per_pixel = static_cast<uint8_t>(espLcdConfiguration->bitsPerPixel),
+        .flags = {
+            .reset_active_high = 0
+        },
+        .vendor_config = nullptr  // Will be set in createPanelHandle
+    };
+}
+
+bool Ili9881cDisplay::createPanelHandle(esp_lcd_panel_io_handle_t ioHandle, const esp_lcd_panel_dev_config_t& panelConfig, esp_lcd_panel_handle_t& panelHandle) {
+    // Based on BSP: https://github.com/espressif/esp-bsp/blob/master/bsp/m5stack_tab5/README.md
+    // TODO: undo static
+    esp_lcd_dpi_panel_config_t dpi_config = {
+        .virtual_channel = 0,
+        .dpi_clk_src = MIPI_DSI_DPI_CLK_SRC_DEFAULT,
+        .dpi_clock_freq_mhz = 60,
+        .pixel_format = LCD_COLOR_PIXEL_FORMAT_RGB565,
+        .in_color_format = LCD_COLOR_FMT_RGB565,
+        .out_color_format = LCD_COLOR_FMT_RGB565,
+        .num_fbs = 1, // TODO: 2?
+        .video_timing =
+            {
+                .h_size = 720,
+                .v_size = 1280,
+                .hsync_pulse_width = 40,
+                .hsync_back_porch = 140,
+                .hsync_front_porch = 40,
+                .vsync_pulse_width = 4,
+                .vsync_back_porch = 20,
+                .vsync_front_porch = 20,
+            },
+        .flags {
+            .use_dma2d = 1, // TODO: true?
+            .disable_lp = 0,
+        }
+    };
+
+    ili9881c_vendor_config_t vendor_config = {
+        .init_cmds = disp_init_data,
+        .init_cmds_size = std::size(disp_init_data),
+        .mipi_config = {
+            .dsi_bus = mipiDsiBus,
+            .dpi_config = &dpi_config,
+            .lane_num = 2,
+        },
+    };
+
+    // Create a mutable copy of panelConfig to set vendor_config
+    esp_lcd_panel_dev_config_t mutable_panel_config = panelConfig;
+    mutable_panel_config.vendor_config = &vendor_config;
+
+    if (esp_lcd_new_panel_ili9881c(ioHandle, &mutable_panel_config, &panelHandle) != ESP_OK) {
+        LOGGER.error("Failed to create panel");
+        return false;
+    }
+
+    LOGGER.info("Panel created successfully");
+    // Defer reset/init to base class applyConfiguration to avoid double initialization
+    return true;
+}
+
+lvgl_port_display_dsi_cfg_t Ili9881cDisplay::getLvglPortDisplayDsiConfig(esp_lcd_panel_io_handle_t /*ioHandle*/, esp_lcd_panel_handle_t /*panelHandle*/) {
+    // Disable avoid_tearing to prevent stalls/blank flashes when other tasks (e.g. flash writes) block timing
+    return lvgl_port_display_dsi_cfg_t{
+        .flags = {
+            .avoid_tearing = 0,
+        },
+    };
+}

Devices/m5stack-tab5/Source/devices/Ili9881cDisplay.h

@@ -0,0 +1,44 @@
+#pragma once
+
+#include <EspLcdDisplayV2.h>
+#include <Tactility/RecursiveMutex.h>
+
+#include <esp_lcd_mipi_dsi.h>
+#include <esp_ldo_regulator.h>
+
+class Ili9881cDisplay final : public EspLcdDisplayV2 {
+
+    class NoLock final : public tt::Lock {
+        bool lock(TickType_t timeout) const override { return true; }
+        void unlock() const override { /* NO-OP */ }
+    };
+
+    esp_lcd_dsi_bus_handle_t mipiDsiBus = nullptr;
+    esp_ldo_channel_handle_t ldoChannel = nullptr;
+
+    bool createMipiDsiBus();
+
+protected:
+
+    bool createIoHandle(esp_lcd_panel_io_handle_t& ioHandle) override;
+
+    esp_lcd_panel_dev_config_t createPanelConfig(std::shared_ptr<EspLcdConfiguration> espLcdConfiguration, gpio_num_t resetPin) override;
+
+    bool createPanelHandle(esp_lcd_panel_io_handle_t ioHandle, const esp_lcd_panel_dev_config_t& panelConfig, esp_lcd_panel_handle_t& panelHandle) override;
+
+    bool useDsiPanel() const override { return true; }
+
+    lvgl_port_display_dsi_cfg_t getLvglPortDisplayDsiConfig(esp_lcd_panel_io_handle_t /*ioHandle*/, esp_lcd_panel_handle_t /*panelHandle*/) override;
+
+public:
+
+    Ili9881cDisplay(
+        const std::shared_ptr<EspLcdConfiguration>& configuration
+    ) : EspLcdDisplayV2(configuration, std::make_shared<NoLock>()) {}
+
+    ~Ili9881cDisplay() override;
+
+    std::string getName() const override { return "ILI9881C"; }
+
+    std::string getDescription() const override { return "ILI9881C MIPI-DSI display"; }
+};

Devices/m5stack-tab5/Source/devices/SdCard.cpp

@@ -0,0 +1,24 @@
+#include "SdCard.h"
+
+#include <Tactility/hal/sdcard/SpiSdCardDevice.h>
+
+constexpr auto SDCARD_PIN_CS = GPIO_NUM_42;
+
+using tt::hal::sdcard::SpiSdCardDevice;
+
+std::shared_ptr<SdCardDevice> createSdCard() {
+    auto configuration = std::make_unique<SpiSdCardDevice::Config>(
+        SDCARD_PIN_CS,
+        GPIO_NUM_NC,
+        GPIO_NUM_NC,
+        GPIO_NUM_NC,
+        SdCardDevice::MountBehaviour::AtBoot,
+        tt::hal::spi::getLock(SPI3_HOST),
+        std::vector<gpio_num_t>(),
+        SPI3_HOST
+    );
+
+    return std::make_shared<SpiSdCardDevice>(
+        std::move(configuration)
+    );
+}

Devices/m5stack-tab5/Source/devices/SdCard.h

@@ -0,0 +1,8 @@
+#pragma once
+
+#include <Tactility/hal/sdcard/SdCardDevice.h>
+#include <memory>
+
+using tt::hal::sdcard::SdCardDevice;
+
+std::shared_ptr<SdCardDevice> createSdCard();

Devices/m5stack-tab5/Source/devices/disp_init_data.h

@@ -0,0 +1,435 @@
+/*
+ * SPDX-FileCopyrightText: 2025 Espressif Systems (Shanghai) CO LTD
+ *
+ * SPDX-License-Identifier: Apache-2.0
+ */
+#pragma once
+#include <esp_lcd_ili9881c.h>
+
+static const ili9881c_lcd_init_cmd_t disp_init_data[] = {
+    // {cmd, { data }, data_size, delay}
+
+    /**** CMD_Page 1 ****/
+
+    {0xFF, (uint8_t[]){0x98, 0x81, 0x01}, 3, 0},
+
+    {0xB7, (uint8_t[]){0x03}, 1, 0},  // set 2 lane
+
+    /**** CMD_Page 3 ****/
+
+    {0xFF, (uint8_t[]){0x98, 0x81, 0x03}, 3, 0},
+
+    {0x01, (uint8_t[]){0x00}, 1, 0},
+
+    {0x02, (uint8_t[]){0x00}, 1, 0},
+
+    {0x03, (uint8_t[]){0x73}, 1, 0},
+
+    {0x04, (uint8_t[]){0x00}, 1, 0},
+
+    {0x05, (uint8_t[]){0x00}, 1, 0},
+
+    {0x06, (uint8_t[]){0x08}, 1, 0},
+
+    {0x07, (uint8_t[]){0x00}, 1, 0},
+
+    {0x08, (uint8_t[]){0x00}, 1, 0},
+
+    {0x09, (uint8_t[]){0x1B}, 1, 0},
+
+    {0x0a, (uint8_t[]){0x01}, 1, 0},
+
+    {0x0b, (uint8_t[]){0x01}, 1, 0},
+
+    {0x0c, (uint8_t[]){0x0D}, 1, 0},
+
+    {0x0d, (uint8_t[]){0x01}, 1, 0},
+
+    {0x0e, (uint8_t[]){0x01}, 1, 0},
+
+    {0x0f, (uint8_t[]){0x26}, 1, 0},
+
+    {0x10, (uint8_t[]){0x26}, 1, 0},
+
+    {0x11, (uint8_t[]){0x00}, 1, 0},
+
+    {0x12, (uint8_t[]){0x00}, 1, 0},
+
+    {0x13, (uint8_t[]){0x02}, 1, 0},
+
+    {0x14, (uint8_t[]){0x00}, 1, 0},
+
+    {0x15, (uint8_t[]){0x00}, 1, 0},
+
+    {0x16, (uint8_t[]){0x00}, 1, 0},
+
+    {0x17, (uint8_t[]){0x00}, 1, 0},
+
+    {0x18, (uint8_t[]){0x00}, 1, 0},
+
+    {0x19, (uint8_t[]){0x00}, 1, 0},
+
+    {0x1a, (uint8_t[]){0x00}, 1, 0},
+
+    {0x1b, (uint8_t[]){0x00}, 1, 0},
+
+    {0x1c, (uint8_t[]){0x00}, 1, 0},
+
+    {0x1d, (uint8_t[]){0x00}, 1, 0},
+
+    {0x1e, (uint8_t[]){0x40}, 1, 0},
+
+    {0x1f, (uint8_t[]){0x00}, 1, 0},
+
+    {0x20, (uint8_t[]){0x06}, 1, 0},
+
+    {0x21, (uint8_t[]){0x01}, 1, 0},
+
+    {0x22, (uint8_t[]){0x00}, 1, 0},
+
+    {0x23, (uint8_t[]){0x00}, 1, 0},
+
+    {0x24, (uint8_t[]){0x00}, 1, 0},
+
+    {0x25, (uint8_t[]){0x00}, 1, 0},
+
+    {0x26, (uint8_t[]){0x00}, 1, 0},
+
+    {0x27, (uint8_t[]){0x00}, 1, 0},
+
+    {0x28, (uint8_t[]){0x33}, 1, 0},
+
+    {0x29, (uint8_t[]){0x03}, 1, 0},
+
+    {0x2a, (uint8_t[]){0x00}, 1, 0},
+
+    {0x2b, (uint8_t[]){0x00}, 1, 0},
+
+    {0x2c, (uint8_t[]){0x00}, 1, 0},
+
+    {0x2d, (uint8_t[]){0x00}, 1, 0},
+
+    {0x2e, (uint8_t[]){0x00}, 1, 0},
+
+    {0x2f, (uint8_t[]){0x00}, 1, 0},
+
+    {0x30, (uint8_t[]){0x00}, 1, 0},
+
+    {0x31, (uint8_t[]){0x00}, 1, 0},
+
+    {0x32, (uint8_t[]){0x00}, 1, 0},
+
+    {0x33, (uint8_t[]){0x00}, 1, 0},
+
+    {0x34, (uint8_t[]){0x00}, 1, 0},
+
+    {0x35, (uint8_t[]){0x00}, 1, 0},
+
+    {0x36, (uint8_t[]){0x00}, 1, 0},
+
+    {0x37, (uint8_t[]){0x00}, 1, 0},
+
+    {0x38, (uint8_t[]){0x00}, 1, 0},
+
+    {0x39, (uint8_t[]){0x00}, 1, 0},
+
+    {0x3a, (uint8_t[]){0x00}, 1, 0},
+
+    {0x3b, (uint8_t[]){0x00}, 1, 0},
+
+    {0x3c, (uint8_t[]){0x00}, 1, 0},
+
+    {0x3d, (uint8_t[]){0x00}, 1, 0},
+
+    {0x3e, (uint8_t[]){0x00}, 1, 0},
+
+    {0x3f, (uint8_t[]){0x00}, 1, 0},
+
+    {0x40, (uint8_t[]){0x00}, 1, 0},
+
+    {0x41, (uint8_t[]){0x00}, 1, 0},
+
+    {0x42, (uint8_t[]){0x00}, 1, 0},
+
+    {0x43, (uint8_t[]){0x00}, 1, 0},
+
+    {0x44, (uint8_t[]){0x00}, 1, 0},
+
+
+
+    {0x50, (uint8_t[]){0x01}, 1, 0},
+
+    {0x51, (uint8_t[]){0x23}, 1, 0},
+
+    {0x52, (uint8_t[]){0x45}, 1, 0},
+
+    {0x53, (uint8_t[]){0x67}, 1, 0},
+
+    {0x54, (uint8_t[]){0x89}, 1, 0},
+
+    {0x55, (uint8_t[]){0xab}, 1, 0},
+
+    {0x56, (uint8_t[]){0x01}, 1, 0},
+
+    {0x57, (uint8_t[]){0x23}, 1, 0},
+
+    {0x58, (uint8_t[]){0x45}, 1, 0},
+
+    {0x59, (uint8_t[]){0x67}, 1, 0},
+
+    {0x5a, (uint8_t[]){0x89}, 1, 0},
+
+    {0x5b, (uint8_t[]){0xab}, 1, 0},
+
+    {0x5c, (uint8_t[]){0xcd}, 1, 0},
+
+    {0x5d, (uint8_t[]){0xef}, 1, 0},
+
+
+
+    {0x5e, (uint8_t[]){0x11}, 1, 0},
+
+    {0x5f, (uint8_t[]){0x02}, 1, 0},
+
+    {0x60, (uint8_t[]){0x00}, 1, 0},
+
+    {0x61, (uint8_t[]){0x07}, 1, 0},
+
+    {0x62, (uint8_t[]){0x06}, 1, 0},
+
+    {0x63, (uint8_t[]){0x0E}, 1, 0},
+
+    {0x64, (uint8_t[]){0x0F}, 1, 0},
+
+    {0x65, (uint8_t[]){0x0C}, 1, 0},
+
+    {0x66, (uint8_t[]){0x0D}, 1, 0},
+
+    {0x67, (uint8_t[]){0x02}, 1, 0},
+
+    {0x68, (uint8_t[]){0x02}, 1, 0},
+
+    {0x69, (uint8_t[]){0x02}, 1, 0},
+
+    {0x6a, (uint8_t[]){0x02}, 1, 0},
+
+    {0x6b, (uint8_t[]){0x02}, 1, 0},
+
+    {0x6c, (uint8_t[]){0x02}, 1, 0},
+
+    {0x6d, (uint8_t[]){0x02}, 1, 0},
+
+    {0x6e, (uint8_t[]){0x02}, 1, 0},
+
+    {0x6f, (uint8_t[]){0x02}, 1, 0},
+
+    {0x70, (uint8_t[]){0x02}, 1, 0},
+
+    {0x71, (uint8_t[]){0x02}, 1, 0},
+
+    {0x72, (uint8_t[]){0x02}, 1, 0},
+
+    {0x73, (uint8_t[]){0x05}, 1, 0},
+
+    {0x74, (uint8_t[]){0x01}, 1, 0},
+
+    {0x75, (uint8_t[]){0x02}, 1, 0},
+
+    {0x76, (uint8_t[]){0x00}, 1, 0},
+
+    {0x77, (uint8_t[]){0x07}, 1, 0},
+
+    {0x78, (uint8_t[]){0x06}, 1, 0},
+
+    {0x79, (uint8_t[]){0x0E}, 1, 0},
+
+    {0x7a, (uint8_t[]){0x0F}, 1, 0},
+
+    {0x7b, (uint8_t[]){0x0C}, 1, 0},
+
+    {0x7c, (uint8_t[]){0x0D}, 1, 0},
+
+    {0x7d, (uint8_t[]){0x02}, 1, 0},
+
+    {0x7e, (uint8_t[]){0x02}, 1, 0},
+
+    {0x7f, (uint8_t[]){0x02}, 1, 0},
+
+    {0x80, (uint8_t[]){0x02}, 1, 0},
+
+    {0x81, (uint8_t[]){0x02}, 1, 0},
+
+    {0x82, (uint8_t[]){0x02}, 1, 0},
+
+    {0x83, (uint8_t[]){0x02}, 1, 0},
+
+    {0x84, (uint8_t[]){0x02}, 1, 0},
+
+    {0x85, (uint8_t[]){0x02}, 1, 0},
+
+    {0x86, (uint8_t[]){0x02}, 1, 0},
+
+    {0x87, (uint8_t[]){0x02}, 1, 0},
+
+    {0x88, (uint8_t[]){0x02}, 1, 0},
+
+    {0x89, (uint8_t[]){0x05}, 1, 0},
+
+    {0x8A, (uint8_t[]){0x01}, 1, 0},
+
+
+
+    /**** CMD_Page 4 ****/
+
+    {0xFF, (uint8_t[]){0x98, 0x81, 0x04}, 3, 0},
+
+    {0x38, (uint8_t[]){0x01}, 1, 0},
+
+    {0x39, (uint8_t[]){0x00}, 1, 0},
+
+    {0x6C, (uint8_t[]){0x15}, 1, 0},
+
+    {0x6E, (uint8_t[]){0x1A}, 1, 0},
+
+    {0x6F, (uint8_t[]){0x25}, 1, 0},
+
+    {0x3A, (uint8_t[]){0xA4}, 1, 0},
+
+    {0x8D, (uint8_t[]){0x20}, 1, 0},
+
+    {0x87, (uint8_t[]){0xBA}, 1, 0},
+
+    {0x3B, (uint8_t[]){0x98}, 1, 0},
+
+
+
+    /**** CMD_Page 1 ****/
+
+    {0xFF, (uint8_t[]){0x98, 0x81, 0x01}, 3, 0},
+
+    {0x22, (uint8_t[]){0x0A}, 1, 0},
+
+    {0x31, (uint8_t[]){0x00}, 1, 0},
+
+    {0x50, (uint8_t[]){0x6B}, 1, 0},
+
+    {0x51, (uint8_t[]){0x66}, 1, 0},
+
+    {0x53, (uint8_t[]){0x73}, 1, 0},
+
+    {0x55, (uint8_t[]){0x8B}, 1, 0},
+
+    {0x60, (uint8_t[]){0x1B}, 1, 0},
+
+    {0x61, (uint8_t[]){0x01}, 1, 0},
+
+    {0x62, (uint8_t[]){0x0C}, 1, 0},
+
+    {0x63, (uint8_t[]){0x00}, 1, 0},
+
+
+
+// Gamma P
+
+    {0xA0, (uint8_t[]){0x00}, 1, 0},
+
+    {0xA1, (uint8_t[]){0x15}, 1, 0},
+
+    {0xA2, (uint8_t[]){0x1F}, 1, 0},
+
+    {0xA3, (uint8_t[]){0x13}, 1, 0},
+
+    {0xA4, (uint8_t[]){0x11}, 1, 0},
+
+    {0xA5, (uint8_t[]){0x21}, 1, 0},
+
+    {0xA6, (uint8_t[]){0x17}, 1, 0},
+
+    {0xA7, (uint8_t[]){0x1B}, 1, 0},
+
+    {0xA8, (uint8_t[]){0x6B}, 1, 0},
+
+    {0xA9, (uint8_t[]){0x1E}, 1, 0},
+
+    {0xAA, (uint8_t[]){0x2B}, 1, 0},
+
+    {0xAB, (uint8_t[]){0x5D}, 1, 0},
+
+    {0xAC, (uint8_t[]){0x19}, 1, 0},
+
+    {0xAD, (uint8_t[]){0x14}, 1, 0},
+
+    {0xAE, (uint8_t[]){0x4B}, 1, 0},
+
+    {0xAF, (uint8_t[]){0x1D}, 1, 0},
+
+    {0xB0, (uint8_t[]){0x27}, 1, 0},
+
+    {0xB1, (uint8_t[]){0x49}, 1, 0},
+
+    {0xB2, (uint8_t[]){0x5D}, 1, 0},
+
+    {0xB3, (uint8_t[]){0x39}, 1, 0},
+
+
+
+// Gamma N
+
+    {0xC0, (uint8_t[]){0x00}, 1, 0},
+
+    {0xC1, (uint8_t[]){0x01}, 1, 0},
+
+    {0xC2, (uint8_t[]){0x0C}, 1, 0},
+
+    {0xC3, (uint8_t[]){0x11}, 1, 0},
+
+    {0xC4, (uint8_t[]){0x15}, 1, 0},
+
+    {0xC5, (uint8_t[]){0x28}, 1, 0},
+
+    {0xC6, (uint8_t[]){0x1B}, 1, 0},
+
+    {0xC7, (uint8_t[]){0x1C}, 1, 0},
+
+    {0xC8, (uint8_t[]){0x62}, 1, 0},
+
+    {0xC9, (uint8_t[]){0x1C}, 1, 0},
+
+    {0xCA, (uint8_t[]){0x29}, 1, 0},
+
+    {0xCB, (uint8_t[]){0x60}, 1, 0},
+
+    {0xCC, (uint8_t[]){0x16}, 1, 0},
+
+    {0xCD, (uint8_t[]){0x17}, 1, 0},
+
+    {0xCE, (uint8_t[]){0x4A}, 1, 0},
+
+    {0xCF, (uint8_t[]){0x23}, 1, 0},
+
+    {0xD0, (uint8_t[]){0x24}, 1, 0},
+
+    {0xD1, (uint8_t[]){0x4F}, 1, 0},
+
+    {0xD2, (uint8_t[]){0x5F}, 1, 0},
+
+    {0xD3, (uint8_t[]){0x39}, 1, 0},
+
+
+
+    /**** CMD_Page 0 ****/
+
+    {0xFF, (uint8_t[]){0x98, 0x81, 0x00}, 3, 0},
+
+    {0x35, (uint8_t[]){0x00}, 0, 0},
+
+// {0x11, (uint8_t []){0x00}, 0},
+
+    {0xFE, (uint8_t[]){0x00}, 0, 0},
+
+    {0x29, (uint8_t[]){0x00}, 0, 0},
+
+//============ Gamma END===========
+
+
+};

Devices/m5stack-tab5/device.properties

@@ -0,0 +1,35 @@
+[general]
+vendor=M5Stack
+name=Tab5
+
+[hardware]
+target=ESP32P4
+flashSize=16MB
+spiRam=true
+spiRamMode=OCT
+spiRamSpeed=200M
+esptoolFlashFreq=80M
+
+[display]
+size=5"
+shape=rectangle
+dpi=294
+
+[lvgl]
+colorDepth=16
+
+[sdkconfig]
+CONFIG_WIFI_PROV_SCAN_MAX_ENTRIES=16
+CONFIG_WIFI_PROV_AUTOSTOP_TIMEOUT=30
+CONFIG_WIFI_PROV_STA_ALL_CHANNEL_SCAN=y
+CONFIG_SLAVE_IDF_TARGET_ESP32C6=y
+CONFIG_ESP_HOSTED_ENABLED=y
+CONFIG_ESP_HOSTED_SDIO_HOST_INTERFACE=y
+CONFIG_ESP_HOSTED_SDIO_SLOT_1=y
+CONFIG_ESP_HOSTED_PRIV_SDIO_PIN_CMD_SLOT_1=13
+CONFIG_ESP_HOSTED_PRIV_SDIO_PIN_CLK_SLOT_1=12
+CONFIG_ESP_HOSTED_PRIV_SDIO_PIN_D0_SLOT_1=11
+CONFIG_ESP_HOSTED_PRIV_SDIO_PIN_D1_4BIT_BUS_SLOT_1=10
+CONFIG_ESP_HOSTED_PRIV_SDIO_PIN_D2_4BIT_BUS_SLOT_1=9
+CONFIG_ESP_HOSTED_PRIV_SDIO_PIN_D3_4BIT_BUS_SLOT_1=8
+CONFIG_ESP_HOSTED_SDIO_GPIO_RESET_SLAVE=15

Devices/m5stack-tab5/devicetree.yaml

@@ -0,0 +1,3 @@
+dependencies:
+  - TactilityKernel
+dts: ../placeholder.dts

Firmware/Kconfig

@@ -69,6 +69,8 @@ menu "Tactility App"
             bool "M5Stack StickC Plus"
         config TT_DEVICE_M5STACK_STICKC_PLUS2
             bool "M5Stack StickC Plus2"
+        config TT_DEVICE_M5STACK_TAB5
+            bool "M5Stack Tab5"
         config TT_DEVICE_UNPHONE
             bool "unPhone"
         config TT_DEVICE_WAVESHARE_ESP32_S3_GEEK

Firmware/idf_component.yml

@@ -43,6 +43,11 @@ dependencies:
     rules:
       # More hardware seems to be supported - enable as needed
       - if: "target in [esp32p4]"
+  espressif/esp_lcd_ili9881c:
+    version: "1.1.0"
+    rules:
+      # More hardware seems to be supported - enable as needed
+      - if: "target in [esp32p4]"
   espressif/esp_lcd_panel_io_additions: "1.0.1"
   espressif/esp_tinyusb:
     version: "1.7.6~1"

Tactility/Source/app/appsettings/AppSettings.cpp

@@ -26,7 +26,7 @@ class AppSettingsApp final : public App {
 public:
 
     void onShow(TT_UNUSED AppContext& app, lv_obj_t* parent) override {
-        auto* toolbar = lvgl::toolbar_create(parent, "External Apps");
+        auto* toolbar = lvgl::toolbar_create(parent, "Installed Apps");
         lv_obj_align(toolbar, LV_ALIGN_TOP_MID, 0, 0);
 
         lv_obj_t* list = lv_list_create(parent);

Tactility/Source/hal/Hal.cpp

@@ -80,8 +80,8 @@ void init(const Configuration& configuration) {
     kernel::publishSystemEvent(kernel::SystemEvent::BootInitUartEnd);
 
     if (configuration.initBoot != nullptr) {
-        LOGGER.info("Init power");
-        tt_check(configuration.initBoot(), "Init power failed");
+        LOGGER.info("Init boot");
+        tt_check(configuration.initBoot(), "Init boot failed");
     }
 
     registerDevices(configuration);