d83b98e99b
- Fix for crash when I2C Scanner is started and no I2C devices were found in the board configuration - Add I2C and UART configurations to CYD-2432S028R board
135 lines
4.4 KiB
C++
135 lines
4.4 KiB
C++
#include "CYD2432S028R.h"
|
|
#include "devices/Display.h"
|
|
#include "devices/SdCard.h"
|
|
#include <Tactility/lvgl/LvglSync.h>
|
|
#include <PwmBacklight.h>
|
|
#include <Tactility/hal/Configuration.h>
|
|
|
|
// SPI Transfer
|
|
#define CYD_SPI_TRANSFER_SIZE_LIMIT (CYD2432S028R_LCD_DRAW_BUFFER_SIZE * LV_COLOR_DEPTH / 8)
|
|
// Display backlight (PWM)
|
|
#define CYD2432S028R_LCD_PIN_BACKLIGHT GPIO_NUM_21
|
|
|
|
using namespace tt::hal;
|
|
|
|
static bool initBoot() {
|
|
//Set the RGB Led Pins to output and turn them off
|
|
ESP_ERROR_CHECK(gpio_set_direction(GPIO_NUM_4, GPIO_MODE_OUTPUT)); //Red
|
|
ESP_ERROR_CHECK(gpio_set_direction(GPIO_NUM_16, GPIO_MODE_OUTPUT)); //Green
|
|
ESP_ERROR_CHECK(gpio_set_direction(GPIO_NUM_17, GPIO_MODE_OUTPUT)); //Blue
|
|
|
|
//0 on, 1 off... yep it's backwards.
|
|
ESP_ERROR_CHECK(gpio_set_level(GPIO_NUM_4, 1)); //Red
|
|
ESP_ERROR_CHECK(gpio_set_level(GPIO_NUM_16, 1)); //Green
|
|
ESP_ERROR_CHECK(gpio_set_level(GPIO_NUM_17, 1)); //Blue
|
|
|
|
return driver::pwmbacklight::init(CYD2432S028R_LCD_PIN_BACKLIGHT);
|
|
}
|
|
|
|
static DeviceVector createDevices() {
|
|
return {
|
|
createDisplay(),
|
|
createSdCard()
|
|
};
|
|
}
|
|
|
|
const Configuration cyd_2432s028r_config = {
|
|
.initBoot = initBoot,
|
|
.createDevices = createDevices,
|
|
.i2c = {
|
|
i2c::Configuration {
|
|
.name = "CN1",
|
|
.port = I2C_NUM_0,
|
|
.initMode = i2c::InitMode::ByTactility,
|
|
.isMutable = true,
|
|
.config = (i2c_config_t) {
|
|
.mode = I2C_MODE_MASTER,
|
|
.sda_io_num = GPIO_NUM_27,
|
|
.scl_io_num = GPIO_NUM_22,
|
|
.sda_pullup_en = false,
|
|
.scl_pullup_en = false,
|
|
.master = {
|
|
.clk_speed = 400000
|
|
},
|
|
.clk_flags = 0
|
|
}
|
|
}
|
|
},
|
|
.spi {
|
|
// Display
|
|
spi::Configuration {
|
|
.device = SPI2_HOST,
|
|
.dma = SPI_DMA_CH_AUTO,
|
|
.config = {
|
|
.mosi_io_num = GPIO_NUM_13,
|
|
.miso_io_num = GPIO_NUM_12,
|
|
.sclk_io_num = GPIO_NUM_14,
|
|
.quadwp_io_num = GPIO_NUM_NC,
|
|
.quadhd_io_num = GPIO_NUM_NC,
|
|
.data4_io_num = GPIO_NUM_NC,
|
|
.data5_io_num = GPIO_NUM_NC,
|
|
.data6_io_num = GPIO_NUM_NC,
|
|
.data7_io_num = GPIO_NUM_NC,
|
|
.data_io_default_level = false,
|
|
.max_transfer_sz = CYD_SPI_TRANSFER_SIZE_LIMIT,
|
|
.flags = 0,
|
|
.isr_cpu_id = ESP_INTR_CPU_AFFINITY_AUTO,
|
|
.intr_flags = 0
|
|
},
|
|
.initMode = spi::InitMode::ByTactility,
|
|
.isMutable = false,
|
|
.lock = tt::lvgl::getSyncLock()
|
|
},
|
|
// SDCard
|
|
spi::Configuration {
|
|
.device = SPI3_HOST,
|
|
.dma = SPI_DMA_CH_AUTO,
|
|
.config = {
|
|
.mosi_io_num = GPIO_NUM_23,
|
|
.miso_io_num = GPIO_NUM_19,
|
|
.sclk_io_num = GPIO_NUM_18,
|
|
.quadwp_io_num = GPIO_NUM_NC,
|
|
.quadhd_io_num = GPIO_NUM_NC,
|
|
.data4_io_num = GPIO_NUM_NC,
|
|
.data5_io_num = GPIO_NUM_NC,
|
|
.data6_io_num = GPIO_NUM_NC,
|
|
.data7_io_num = GPIO_NUM_NC,
|
|
.data_io_default_level = false,
|
|
.max_transfer_sz = 0,
|
|
.flags = 0,
|
|
.isr_cpu_id = ESP_INTR_CPU_AFFINITY_AUTO,
|
|
.intr_flags = 0
|
|
},
|
|
.initMode = spi::InitMode::ByTactility,
|
|
.isMutable = false,
|
|
.lock = tt::lvgl::getSyncLock() // esp_lvgl_port owns the lock for the display
|
|
},
|
|
},
|
|
|
|
.uart {
|
|
uart::Configuration {
|
|
.name = "P1",
|
|
.port = UART_NUM_1,
|
|
.rxPin = GPIO_NUM_1,
|
|
.txPin = GPIO_NUM_3,
|
|
.rtsPin = GPIO_NUM_NC,
|
|
.ctsPin = GPIO_NUM_NC,
|
|
.rxBufferSize = 1024,
|
|
.txBufferSize = 1024,
|
|
.config = {
|
|
.baud_rate = 115200,
|
|
.data_bits = UART_DATA_8_BITS,
|
|
.parity = UART_PARITY_DISABLE,
|
|
.stop_bits = UART_STOP_BITS_1,
|
|
.flow_ctrl = UART_HW_FLOWCTRL_DISABLE,
|
|
.rx_flow_ctrl_thresh = 0,
|
|
.source_clk = UART_SCLK_DEFAULT,
|
|
.flags = {
|
|
.allow_pd = 0,
|
|
.backup_before_sleep = 0,
|
|
}
|
|
}
|
|
}
|
|
}
|
|
};
|