SX1262 is now finally stable due to these key changes:
- Interrupt handling: To circumvent erratum 3.11 level interrupts are utilized.
Unsure if this was actually an issue as only the DIO1 IRQ is installed,
but it should be done nonetheless to avoid problems once more GPIO interrupts are used.
- RadioLib HAL: Use the hooks for beginnig and ending a train of SPI transactions
to lock and reserve the device, making it more reliable. Also, CS handling is removed
as RadioLib manages this manually.
- Board T-Lora Pager: Step down SPI frequency to reasonable rate
- Refactor `AppManifest`: add new fields and rename existing ones
- Parse and validate the manifest from an app that is being installed.
- Remove deprecated `scoped()` from `Lock`
- Create `Tactility/Paths.h`
- App loading at boot now properly parses the manifest files of external apps
- Properly lock both source and destination locations during app install
- Remove LVGL path variants from `AppPaths` and `ServicePaths`
- Removed `xPath` base classes for apps and services. There's now `AppPaths` and `ServicePaths`.
- Renamed app and service paths: "data" and "system" paths are now "user data" and "assets"
### Cardputer:
- Fix keyboard issue with up/down button conflict when selecting switch
- Fix backlight flickering
### UI improvements
- Removed a 3 pixel border that went around the entire desktop environment
- Improved system layout (GuiService)
- Statusbar: improved layout (mainly margin/padding)
- Toolbar: fixed margin/padding of all buttons, fixed alignment of all content
- Improved layout/UI of many apps
### Other
- Update LVGL to 9.3.0 official release (was dev version)
- Implement `UiScale` in `hal::Configuration`: small screens with no touch can now opt for a more optimized experience (e.g. Cardputer, Waveshare 1.47, Waveshare 1.3", etc.)
- Fix for Cardputer UART configuration and added I2C configuration
- Fix for software keyboard bug in Gui
- Removed deprecated fields from `hal::Configuration`
- Updated the simulator devices to use the new HAL config
- add `bool tt::hal::hasDevice(Device::Type)`
- Cleanup of `AppList` app code
- Improve `Gpio` app for small screen devices
- Added various ESP32 GCC wrappers to wrap LVGL functions (with manipulations for small screen devices)
- Moved `Launcher` assets to `assets/` subfolder
- Optimized `Toolbar` for small screen devices
- Stop showing `system/` partition in `FileBrowser` because it's read-only and not very useful. Created `config::SHOW_SYSTEM_PARTITION` to override this behaviour.
- Hide apps when their required hardware isn't available (I2C, UART, PowerDevice)
- Fix for `CYD-2432S032C` DPI setting
- `FileBrowser` app now supports deleting directories (recursively)
- `DevelopmentService` and `tactility.py` now support the app `uninstall` action
- Fix crash for `File` app: implement file locking in several places (SPI SD cards need it)
- Remove I2C configuration from `M5stackCardputer.cpp` because we don't support the "Cardputer Adv" variant in that firmware.
- Fix for crash when I2C Scanner is started and no I2C devices were found in the board configuration
- Add I2C and UART configurations to CYD-2432S028R board
## New features
- Implemented support for app packaging in firmware and `tactility.py`: load `.app` files instead of `.elf` files. Install apps remotely or via `FileBrowser`.
- Ensure headless mode works: all services that require LVGL can deal with the absence of a display
- Service `onStart()` is now allowed to fail (return `bool` result)
- Added and improved various file-related helper functions
## Improvements
- Completely revamped the SystemInfo app UI
- Improved Calculator UI of internal and external variant
- Fix Chat UI and removed the emoji buttons for now
- Fix for toolbar bottom padding issue in all apps
## Fixes
- Fix for allowing recursive locking for certain SPI SD cards
& more
- Support larger ROM sizes
- Add storage status to SystemInfo app
- Made DisplayDevice more robust (drivers must specify LVGL/DisplayDriver support explicitly)
- Disable `DisplayDriver` for `St7701Display` (on CYD 4848)
- Improve `GraphicsDemo`: check for feature capability and show alert dialog if there's an issue
- `DevelopmentService` installs to `/data` instead of `/sdcard`
- Fixed `tt_app_get_data_directory()` and `tt_app_get_data_directory_lvgl()` (C++ to C)
- `tt_kernel.h` now defines `MAX_TICKS`
- `tt_init.cpp` now exports `esp_log()` which is required since ESP-IDF 5.5
- Add implementation for CYD-E28R28T. This implementation has the SD card working, using the same driver as the CYD-2432S028R.
- Edit .gitignore for some missing things.
- run chmod +x on some build scripts
- Make EspLcdDisplay's reference public for access from drivers (needed for driver St7789i8080)
> ```class EspLcdDisplay : public tt::hal::display::DisplayDevice {```
- Updated all boards to use `hal::Configuration.createDevices`
- Updated all boards to use new directory structure and file naming convention
- Refactored `Xpt2046SoftSpi` driver.
- Created `Axp2101Power` device in `Drivers/AXP2101`
- Removed global static instances from some drivers (instances that kept a reference to the Device*)
- Improved `SystemInfoApp` UI: better memory labels, hide external memory bar when there's no PSRAM
- Fix for HAL: register touch devices after displays are registered
- Fix for Boot splash hanging on WiFi init: unlock file lock after using it
* feat(board): add support for CYD-2432S028R board and update XPT2046 driver
- Added CONFIG_TT_BOARD_CYD_2432S028R in Kconfig.
- Included support for CYD2432S028R in Boards.h and board.cmake.
- Updated Xpt2046Touch driver to use configuration->spiDevice instead of SPI2_HOST when creating the SPI handle.
- Note: SD card is not working on this board yet.
This commit introduces full support for the CYD-2432S028R board and improves the touchscreen driver flexibility by allowing dynamic SPI device configuration. SD card functionality still needs to be implemented.
* Added a new GitHub Actions job to build firmware for the cyd-2432s028r board
using the existing build-firmware action. This ensures continuous integration
coverage for the new board alongside other supported ESP32 variants.
* Removed unnecessary file
* Refactor CYD-2432S028R board initialization, touch, and SD drivers
- Updated board CMakeLists to use `XPT2046-Bitbang` instead of `XPT2046`.
- Added `YellowSdCard` support and initialized SD card in board configuration.
- Updated SPI pin assignments for touch and SD card to match hardware setup.
- Refactored touch driver to use bit-banged SPI with proper start/stop handling.
- Touch adaptation was based on a merge of:
- https://github.com/NellowTCS/Tactility/blob/main/Drivers/XPT2046-Bitbang/Source/XPT2046-Bitbang.cpp
- https://github.com/ddxfish/XPT2046_Bitbang_Arduino_Library/blob/main/XPT2046_Bitbang.cpp
- Calibration is currently static in code:
Calibration cal = {
.xMin = 100,
.xMax = 1900,
.yMin = 100,
.yMax = 1900
};
This removes the need for manual touchscreen calibration, but code was adjusted to support dynamic calibration in the future.
- Added comments and constants for software SPI touch pins.
- Updated `YellowDisplay` to use new touch driver configuration.
* Refactor XPT2046 touch driver: replace Bitbang with SoftSPI implementation, update CMake and README files
- Add app path get() functions to `TactilityC`
- Improved `Dispatcher` and `DispatcherThread`
- Improved `PubSub` (type safety)
- Created test for `DispatcherThread` and `PubSub`
- Save properties files on app exit (various apps) by posting it to the main dispatcher (fixes UI hanging briefly on app exit)
- Fixed bug with `SystemSettings` being read from the wrong file path.
- `loadPropertiesFile()` now uses `file::readLines()` instead of doing that manually
- Increased timer task stack size (required due to issues when reading a properties file for the very first time)
- General cleanup
- Created `EstimatedPower` driver that uses an ADC pin to measure voltage and estimate the battery charge that is left.
- Cleanup of T-Deck board (updated to new style)
- Added CONFIG_TT_BOARD_CYD_2432S028R in Kconfig.
- Included support for CYD2432S028R in Boards.h and board.cmake.
- Updated Xpt2046Touch driver to use configuration->spiDevice instead of SPI2_HOST when creating the SPI handle.
- Note: SD card is not working on this board yet.
This commit introduces full support for the CYD-2432S028R board and improves the touchscreen driver flexibility by allowing dynamic SPI device configuration. SD card functionality still needs to be implemented.
## Launcher
- Launcher now has optional power button to show
- Launcher layout improvements
- Removed text from Launcher (translations with larger amounts of text did not fit small device formats)
## T-Lora Pager
- Implement power off (created `BQ25896` driver)
- Implemented haptics (created `DRV2605` driver project) and buzz on startup
- Reversed scroll wheel
- Created `TloraEncoder` device and relocated its logic from `TloraKeyboard`
- Disabled SPIRAM test to save 0.5 seconds of boot time (current boot time is very slow)
- Update `ST7796` esp_lcd driver to v1.3.4
- Fixed keyboard bug: delete queue in destructor
- Fixed driver dependencies: Avoiding usage of global static shared_ptr. Properly constructor-inject everywhere, or use `tt::hal::findDevices()`
- I2C configuration is now immutable (you cannot disable it anymore from the I2C Settings app, as it would break crucial drivers)
- Renamed I2C and UART subsystems to "Internal"
## Drivers
- On/off interface added to `PowerDevice`
- Created `tt::hal::Configuration.createDevices`, which is intended to replace all custom create calls for display, keyboard, etc.
- Created `EncoderDevice` as a `Device` subtype
## Other Improvements
- Changed `findDevices(type, function)` into a templatized function.
- Improved SD card mounting
## Fixes
- Show Screenshot app again
- Fixed Statusbar: some updates were allowed to time out and fail silently: When the Statusbar service would do a state update, the LVGL statusbar would never get updated due to this timeout.
- Fixed memory leaks in all `createSdCard()` functions (in most board implementations)
## New features
- Implement translations for apps
- Created `tt::settings::setLanguage` and `::getLanguage()`
- External app errors are now reported to the user via an AlertDialog
- Store system settings in `/data/settings.properties`
- Created a "Region & Language" app and moved the timezone setting there.
## Other changes
- Change `/data` and `/system` filesystem sector size from 4096 to 512 bytes to allow for more small files (60+ files of 4kB were over the limit of 256kB for the filesystem)
- Increased size of `/data` and `/system`
- Moved `tt::time::*` to `tt::settings`
- Removed the timezone setting from the "Time & Date" setting app
- Reverse encoder direction of Lilygo T-Lora Pager
- Improved partability of `Time.cpp` (removed separate set of functions for PC/sim)
## New
- Read property files with `PropertiesFile`
- Support `boot.properties` so the user can specify the launcher app and an optional app to start after the launcher finishes. (see `BootProperties.cpp`)
- Create registry for CPU affinity and update code to make use of it
- `AppRegistration` and `ServiceRegistration` now also ensure that the `/data` directories always exist for all apps
- `Notes` is now the default app for opening text files. `TextViewer` is removed entirely. Created `tt::app:🎶:start(path)` function.
- WiFi settings moved from NVS to properties file.
- Specify `*.ap.properties` file on the SD card for automatic WiFi settings import on start-up.
- Added `file::getLock(path)` and `file::withLock(path, function)` to do safe file operations on SD cards
## Improvements
- Update TinyUSB to `1.7.6~1`
- Improved `Boot.cpp` code. General code quality fixes and some restructuring to improve readability.
- `tt::string` functionality improvements
- Rename `AppRegistry` to `AppRegistration`
- Rename `ServiceRegistry` to `ServiceRegistration`
- Cleanup in `Notes.cpp`
- `FileTest.cpp` fix for PC
- Created `TestFile` helper class for tests, which automatically deletes files after the test.
- Renamed `Partitions.h` to `MountPoints.h`
- Created `std::string getMountPoints()` function for easy re-use
- Other code quality improvements
- `SdCardDevice`'s `getState()` and `isMounted()` now have a timeout argument
## Fixes
- ELF loading now has a lock so to avoid a bug when 2 ELF apps are loaded in parallel
- `DisplayDevice` improvements related `DisplayDriver`
- Replaced incorrect usage of `spiBusHandle` with `spiHostDevice` in all SPI display devices
- Disabled `DisplayDriver` support for RGB displays for now
- Updated `GraphicsDemo` project for the above changes
- TactilityC improvements:
- created `tt_hal_device_find()`
- created `tt_hal_display_*`
- created `tt_hal_touch_*`
- created `tt_lvgl_*`
- export `tt_app_*` calls
- Refactored `TouchDevice`: it can now start/stop LVGL separately, and it has an optional `TouchDriver` interface
- Refactored `DisplayDevice`: it can now start/stop LVGL separately, and it has an optional `DisplayDriver` interface
- Updated all boards and drivers for above changes
- LVGL can now be stopped and (re)started on the fly
- Fixed issues with restarting Gui and Statusbar services
- Refactored `Gui` service to be class and renamed `Gui` to `GuiService`
- Fixed `Statusbar` service: forgot to deregister one of the icons
- Updated `esp_lcd_st7701` to v1.1.3
- `lv_textarea_create()` now automatically registers the hardware keyboard hooks (by wrapping the function)
- Fixed and updated `tactility.py`
- Cleanup of a lot of code
- `BootInitLvglBegin` and `BootInitLvglEnd` are replaced by `LvglStarted` and `LvglStopped`.
- Introduced `tt::service::State` which is accessible via `tt::service::getState()` (and internally via `ServiceInstance`)
- Started replacing `#define TAG` with `constexpr auto TAG = "..";`
- Implemented `LaunchId` to keep track of the apps that are started
- Implemented `FileSelection` app to select existing and/or new files.
- Moved some re-usable file functionality to `tt::file::`
- Renamed `Files` app to `FileBrowser`
- Updated `Notes` app to use new `FileSelection` functionality, and cleaned it up a bit.
- General code cleanliness improvements
- Bump version for next release
- Fix default gamma for CYD 2432S032C
- Remember gamma curve setting from Display settings app
- Add UART to Core2 (still has no voltage on Grove port, though)
- LVGL performance improvements: pin to second core and set task priority to "critical"
- Fix build warnings, including deprecations
- Removed deprecated `Thread` constructor
- Fix WaveShare S3 display: Some displays would show a white screen at 12MHz, so I'm putting it back to the
official config values.
- Replace C function pointers with C++ `std::function` in `Thread`, `Timer` and `DispatcherThread`
- Rename `SystemEvent`-related functions
- WiFi: fix auto-connect when WiFi disconnects from bad signal
- WiFi: fix auto-connect when WiFi fails to auto-connect
- WiFi: implement disconnect() when tapping connected WiFi ap in WiFi management app
- Refactored GPS service and HAL: GPS is no longer part of the HAL configuration. You can now add configure new GPS devices from the GPS settings app.
- T-Deck adds a boot hook to check if a GPS configuration exists and adds it when the config is empty.
- Implemented the concept of ObjectFile to read/write arrays of a raw data type (e.g. struct) to disk.
- Implemented more file utils (e.g. to create all directories of a path)
- Fix case for board configs
- CMake now only builds a single board instead of all boards for the selected SOC. This makes it quicker to compile a single firmware.
It's just 214ce6f191 adapted to Tactility source code.
All credits to original author of fix.
Signed-off-by: Paweł Chmiel <pawel.mikolaj.chmiel@gmail.com>
4848S040C:
- Fix SD card CS pin setting for
- Fixes for colour
- Implement PwmBacklight driver
Other:
- Fix for TouchDevice type
- Show landscape launcher for square displays
- Implement CrowPanel Advance 3.5"
- New driver subproject: ILI9488
- New driver subproject: GT911
- Refactor T-Deck to use new driver subproject
- Fix for `flash.ps1`: don't set flash speed
