Unphone improvements (#172)

- Debounce nav button presses: This fixes multiple triggers on a single press to navigate back. Otherwise, more than 1 app would often close at the same time.
- Nav button respond to release instead of push down, because these buttons aren't super reliable in general. (I might change this in the future after more testing)
- Move single buzz earlier in boot phase, so that we can detect silent boot loops.

Boards/UnPhone/Source/PowerOn.cpp

@@ -64,24 +64,22 @@ static bool unPhonePowerOn() {
 
     unPhoneFeatures.printInfo();
 
+    // Vibrate once
+    // Note: Do this before power switching logic, to detect silent boot loops
+    unPhoneFeatures.setVibePower(true);
+    tt::kernel::delayMillis(150);
+    unPhoneFeatures.setVibePower(false);
+
+    // Turn off the device if power switch is on off state,
+    // instead of waiting for the Thread to start and continue booting
     updatePowerSwitch();
     startPowerSwitchThread();
 
     unPhoneFeatures.setBacklightPower(false);
-
-    // Init touch screen GPIOs (used for vibe motor)
     unPhoneFeatures.setVibePower(false);
-
     unPhoneFeatures.setIrPower(false);
-
-    // This will be default LOW implicitly, but this makes it explicit
     unPhoneFeatures.setExpanderPower(false);
 
-    // Vibrate once
-    unPhoneFeatures.setVibePower(true);
-    tt::kernel::delayMillis(150);
-    unPhoneFeatures.setVibePower(false);
-
     return true;
 }
 

Boards/UnPhone/Source/UnPhoneFeatures.cpp

@@ -1,6 +1,7 @@
 #include "UnPhoneFeatures.h"
 #include "FreeRTOS-Kernel/include/FreeRTOS.h"
 #include "Log.h"
+#include "kernel/Kernel.h"
 #include "service/loader/Loader.h"
 #include <driver/gpio.h>
 #include <driver/rtc_io.h>
@@ -39,10 +40,18 @@ static int32_t buttonHandlingThreadMain(void* context) {
     int pinNumber;
     while (!*interrupted) {
         if (xQueueReceive(interruptQueue, &pinNumber, portMAX_DELAY)) {
+            // The buttons might generate more than 1 click because of how they are built
             TT_LOG_I(TAG, "Pressed button %d", pinNumber);
             if (pinNumber == pin::BUTTON1) {
                 tt::service::loader::stopApp();
             }
+
+            // Debounce all events for a short period of time
+            // This is easier than keeping track when each button was last pressed
+            tt::kernel::delayMillis(50);
+            xQueueReset(interruptQueue);
+            tt::kernel::delayMillis(50);
+            xQueueReset(interruptQueue);
         }
     }
     return 0;
@@ -56,17 +65,15 @@ UnPhoneFeatures::~UnPhoneFeatures() {
 }
 
 bool UnPhoneFeatures::initPowerSwitch() {
-    uint64_t power_pin_mask = BIT64(pin::POWER_SWITCH);
+    gpio_config_t config = {
-
+        .pin_bit_mask = BIT64(pin::POWER_SWITCH),
-    gpio_config_t power_gpio_config = {
-        .pin_bit_mask = power_pin_mask,
         .mode = GPIO_MODE_INPUT,
         .pull_up_en = GPIO_PULLUP_DISABLE,
         .pull_down_en = GPIO_PULLDOWN_DISABLE,
         .intr_type = GPIO_INTR_POSEDGE,
     };
 
-    if (gpio_config(&power_gpio_config) != ESP_OK) {
+    if (gpio_config(&config) != ESP_OK) {
         TT_LOG_E(TAG, "Power pin init failed");
         return false;
     }
@@ -81,6 +88,11 @@ bool UnPhoneFeatures::initPowerSwitch() {
 }
 
 bool UnPhoneFeatures::initNavButtons() {
+    if (!initGpioExpander()) {
+        TT_LOG_E(TAG, "GPIO expander init failed");
+        return false;
+    }
+
     interruptQueue = xQueueCreate(4, sizeof(int));
 
     buttonHandlingThread.setName("unphone_buttons");
@@ -89,20 +101,25 @@ bool UnPhoneFeatures::initNavButtons() {
     buttonHandlingThread.setCallback(buttonHandlingThreadMain, &buttonHandlingThreadInterruptRequest);
     buttonHandlingThread.start();
 
-    uint64_t input_pin_mask =
+    uint64_t pin_mask =
         BIT64(pin::BUTTON1) |
         BIT64(pin::BUTTON2) |
         BIT64(pin::BUTTON3);
 
-    gpio_config_t input_gpio_config = {
+    gpio_config_t config = {
-        .pin_bit_mask = input_pin_mask,
+        .pin_bit_mask = pin_mask,
         .mode = GPIO_MODE_INPUT,
         .pull_up_en = GPIO_PULLUP_ENABLE,
         .pull_down_en = GPIO_PULLDOWN_DISABLE,
-        .intr_type = GPIO_INTR_NEGEDGE,
+        /**
+         * We have to listen to the button release (= positive signal).
+         * If we listen to button press, the buttons might create more than 1 signal
+         * when they are continuously pressed.
+         */
+        .intr_type = GPIO_INTR_POSEDGE,
     };
 
-    if (gpio_config(&input_gpio_config) != ESP_OK) {
+    if (gpio_config(&config) != ESP_OK) {
         TT_LOG_E(TAG, "Nav button pin init failed");
         return false;
     }
@@ -125,7 +142,7 @@ bool UnPhoneFeatures::initOutputPins() {
         BIT64(pin::IR_LEDS) |
         BIT64(pin::LED_RED);
 
-    gpio_config_t output_gpio_config = {
+    gpio_config_t config = {
         .pin_bit_mask = output_pin_mask,
         .mode = GPIO_MODE_OUTPUT,
         .pull_up_en = GPIO_PULLUP_DISABLE,
@@ -133,7 +150,7 @@ bool UnPhoneFeatures::initOutputPins() {
         .intr_type = GPIO_INTR_DISABLE,
     };
 
-    if (gpio_config(&output_gpio_config) != ESP_OK) {
+    if (gpio_config(&config) != ESP_OK) {
         TT_LOG_E(TAG, "Output pin init failed");
         return false;
     }
@@ -165,6 +182,11 @@ bool UnPhoneFeatures::initGpioExpander() {
 bool UnPhoneFeatures::init() {
     TT_LOG_I(TAG, "init");
 
+    if (!initGpioExpander()) {
+        TT_LOG_E(TAG, "GPIO expander init failed");
+        return false;
+    }
+
     if (!initNavButtons()) {
         TT_LOG_E(TAG, "Input pin init failed");
         return false;
@@ -180,11 +202,6 @@ bool UnPhoneFeatures::init() {
         return false;
     }
 
-    if (!initGpioExpander()) {
-        TT_LOG_E(TAG, "GPIO expander init failed");
-        return false;
-    }
-
     return true;
 }
 

Documentation/ideas.md

@@ -16,6 +16,7 @@
 - Fix bug in T-Deck/etc: esp_lvgl_port settings has a large stack size (~9kB) to fix an issue where the T-Deck would get a stackoverflow. This sometimes happens when WiFi is auto-enabled and you open the app while it is still connecting.
 - M5Stack Core only shows 4MB of SPIRAM in use
 - Try to improve Core2 and CoreS3 performance by setting swap_bytes of display driver to false (this is a software operation on the display buffer!) and use 24 bit colour mode if needed
+- Files app: When SD card is not mounted, don't show it
 
 # TODOs
 - Boards' CMakeLists.txt manually declare each source folder. Update them all to do a recursive search of all folders.